Army Field manual No. 19-15: FM 19-15 Civil Disturbances

Field Manual
No, 19-15
Page 1 of4
*FM 19-15
Headquarters
Department of the Army
.Washington, DC, 25 November 1985

FM 19-15
CIVIL DISTURBANCES

Table ofContents
preface

FedeJ:alJntervenJi!uutnd Aid Causes Locations

Chapter 2 -The Participants Crowd Behavior

Chapter 3 -Federal Intervention Civil Disturbances in ClvilialLCommunities Civil Disturbances on DOD Installations COO1ll1and and ConU'QJ Task Force Or~anization
http://atiam.train.army.mil/portal!atia/adlsc/view/public/296872-1/fmJf9... 12/28/2004 DODDOA-008742

.Chapt~r 4 -Information Planning and Threat Analysis
InforIUJltio.Jl Needs...llnd--.-Sources
Information Restrictions
Threat Analysis

Chapter 5 -Operations Planning C~)Ordinati!)jLQf CiviliaD~a_nd Military Efforts Funding and Military Resources LQ,glstics Communications Relief Administ(atiQ.n Media Relations Plans and Reports
Chapter 6 -Control Force Qperations
lsolate~the_Area
Protect Likely Targets
Exert Control
Establish Area Control
Neutralize Special Threats

Chapter 7 -Force Options Chapter 8 -Crowd Control Formations
T.ypes ofFormations
\Veapon Positions
Commands

Cadence
http://atiam.train.anny.millportallatialadlsc/view/public/296872-llfmlI9...
DODDOA·008743
Interval and Distance
Commander and Leader Positions

Four-Squad Platoon Formations
Three-Squad Platoon Formations
Company Formations

Chapter 9 -Riot Control Agents Grenades

Water
Chapter 10 -Riot Batons Employment Baton Grip andPosJtioJls

Defensive Techniques

Ring A.irfoil Systems
Shotguns
Rifles

Chapter 12 -Apprehension and Detention Operations Apprehensions Searches Come-Along Tecbnique~ Detention Facility Operations
http://atiam.train.anny.millportallatiaiadlsc/view/public/296872-1/fm/19...
12/28/2004
DODDOA-008744
Cb~t~r13:: Training for~CivUDJstqrbances Unit Training Leadership SpecblLR~actiQn T~am IOtiniog
Appendix Glossary References Authorization Letter
DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.
*This publication supersedes FM 19-15, 30 October 1975, and TC 19-1, 1 August 1975.
http://atiam.train.army.millportallatialadlsc/view/public/296872-1 /fml19-15/toc.htm 12/28/200~ __
DODDOA-008745
PREFACEi
The purpose of this field manual is to provide guidance for the commander and his staff in preparing for and providing assistance to civil authorities in civil disturbance control operations. It discusses the principles, policies, and legal considerations that govern the commitment of federal forces to civil disturbance control operations, the principles of civil disturbance control operations, planning and training for such operations, and the operational tasks and techniques employed to control civil disturbances and neutralize special threats.
This guidance is intended for use ofboth active and reserve component US Anned Forces. Commanders of federal installations that use nonmilitary personnel, such as DOD police or contract security guards, for security must consult current DOD policy on the use of such personnel in civil disturbance control operations.
The proponent of this publication is HQ TRADOC. Submit changes for improving this publication on DA Fonn 2028 (Recommended Changes to Publications and Blank Fonns) and forward it to Commandant, United States Anny Military Police School, ATTN: ATZN-MP-DML, Fort McClellan, AL 36205-5030.
Unless otherwise stated, whenever the masculine gender is used, both men and women are included.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008746

CHApTER!
Civil Disturbances
Civil disturbances arise from acts of civil disobedience. They occur most often when participants in mass acts ofcivil disobedience become antagonistic toward authority, and authorities must struggle to wrest the initiative from an unruly crowd. In the extreme, civil disturbances include criminal acts of terrorism. Civil disturbances, 'in any form, are prejudicial to public law and order.
FEDERAL INTERVENTION AND AID
Under the US Constitution and the US Code, the President is empowered to direct federal intervention in civil disturbances to:
•
Respond to state requests for aid in restoring order.

•
Enforce the laws ofthe United States.

•
Protect the civil rights ofcitizens.

•
Protect federal property and functions.

Under the Constitution, each state is responsible for protecting life and property within its boundaries. State and local governments use their civil forces to maintain law and order and to quell civil disturbances. However, ifa civil disturbance exceeds the resources ofa state, federal troops may be called upon to help restore and maintain law and order.
The Constitution and federal statutes authorize the President to direct the use offederal armed troops within the 50 states, the District ofColumbia, Puerto Rico, and US possessions and territories and their political subdivisions. The President is also empowered to federalize the National Guard of any state to suppress rebellion and enforce laws.
Federal aid is given to a state when the state has used all ofits resources, including its National Guard, to quell a disorder and finds the resources not sufficient. Usually, active-duty federal forces are used to augment the requesting state's National Guard. But the President may choose to federalize another state's National Guard and use them, alone or with other forces, to restore order.
The President also can employ federal troops to ensure the execution of US law when a state opposes or obstructs US law or impedes the course ofjustice under those laws. And the President can employ armed federal troops to suppress insurrection, domestic violence, unlawful assemblies, and conspiracy if such acts deprive the people oftheir constitutional rights and privileges and a state's civil authorities cannot or will not provide adequate protection.
The President is also authorized to use armed federal troops to protect federal property and functions when the need for protection exists and the local civil authorities cannot or will not give adequate protection. The right ofthe United States to protect all federal property and functions regardless of their locations is an accepted principle ofour government.
As a temporary measure, federal military equipment and facilities may be loaned to state and local governmental bodies law and enforcement agencies for use during civil disturbances. These resources may also be loaned to a state's National Guard and to non DOD federal agencies. The requesting agencies are expected to provide enough resources oftheir own to minimize the need for us military
http://atiam.train.army.mil/portal/atialadlsc/view/public/296872-1 /fml19-1S/CH l.htm 12/28/2004
DODDOA-008747
resources. And the loan of the resources must not conflict with US military needs.
CAlfSES
Civil disturbances may arise from a number of causes. Most often they arise from political grievances, urban economic conflicts and community unrest, terrorist acts, or foreign influences. The event may be triggered by a single cause. Or it may arise from a combination ofcauses.
Demonstrations ofpolitical grievances range from simple protests of specific issues to full-scale civil disobedience. Many forms Qfpolitical protest, while disruptive, are not unlawful. These protests may be spontaneous, but they generally are planned events. They may even be coordinated with local authorities. Most protectors are law-abiding citizens. They intend their protests to be nonviolent. Violence occurs mainly when control forces must try to contain a protest or arrest protectors involved in civil disobedience. The presence of agitators increases the chance of violence. Agitators want to provoke the control force into overreacting. This embarrasses authorities. It can also gain media and public sympathy for the protectors.
Urban conflicts and community unrest arise from highly emotional social and economic issues. Economically deprived inner-city residents may perceive themselves treated unjustly or ignored by the people in power. Tension can build in a community over a variety of issues. Community services and housing and labor issues are often disputed: Tension creates the potential for violence. When tension is high, it takes only a minor incident or a rumor of an injustice to ignite a civil disturbance. This is particularly true if the community's relations with local police are part of the problem.
Significant cultural differences in a community can create an atmosphere of distrust. Unrest among ethnic groups competing for jobs can erupt into civil disturbance. Sometimes a large group ofrefugees resettles in one community, creating unrest in the community. Ifjobs are in short supply and refugees are taking what jobs there are, feelings of animosity can arise. As emotions run high, violence becomes likely. .
Civil disturbances may be organized by disaffected groups. These groups like to embarrass the government. Or they may demonstrate as a cover for terrorism. Their goal is to cause an overreaction by authorities. They think this will generate sympathy for their cause among the general population. Foreign nations may promote civil disturbances through surrogate organizations. The surrogates involve themselves in activities that promote a particular nation's interests. Their actions may be quite overt. Sometimes they even conduct fund-raising and meinbership drives. The surrogate's sponsors provide support in many ways. The sponsors give money, organizational help, and moral support. They may also help by training members of the surrogate group in civil disobedience, vandalism, and agitation and manipulation of crowds and media. Agents of foreign nations may influence civil disturbances. Agents infiltrate disaffected groups to increase their potential for violence. If they are successful and government forces overreact, the targeted government may be seen as repressive.
LOCATIONS
Civil disturbances usually occur at places symbolic of a grievance, near the cause of a grievance, or close at hand to an aggrieved crowd. Examples of such places are nuclear weapons facilities or power plants, in urban areas, at refugee camps, or at government facilities. Nuclear weapons facilities and power plants are subject to demonstrations by anti-nuclear activists. These activists demonstrate at places they know or think are used to develop, build, transport, or store nuclear weapons or their parts. The facilities can belong to federal agencies or to businesses with DOD contracts. Active involvement
http://atiam.train.army.miliportal/atiaiadlsc/view/public/296872-1/fm/19... l.htm 12/28/2004
DODDOA-008748
with nuclear weapons is not necessary. Past involvement or the activists' belief of past involvement can make the facilities targets for demonstrations. Nuclear power plants are also targets of environmentalists and other activist groups. The plants are seen as dangers to society and the environment. Demonstrations at plants or plant construction sites may be held to try to interfere with plant operations.
US government facilities like recruiting offices, federally-Ie~sed buildings, ROTC buildings, and federal courthouses also can be the targets of demonstrations. A government facility may be targeted simply because a protesting group attaches a symbolic value to, or perceives a connection with, a protested policy. This is especially true of anti-war and anti-nuclear protest groups. They may choose a facility because they see it as the source of their grievance. Or they may target a facility because the people working there are seen as having the power to address the group's grievance. .
Urban areas can be the scene of inner-city conflicts, labor disputes, and political struggles. Disturbances in urban areas are usually fueled by aggriev~d members of the community. However, an urban area having symbolic value to a particular group may be the stage used by outside demonstrators to draw attention to their cause.
Refugee and resettlement camps can become the focus ofa civil disturbance. Large numbers of refugees entering the US in mass are often placed temporarily in refugee camps until they can be resettled. Resettlement can be a slow and difficult process. The boredom, frustration, and other stresses refugees experience in these camps can create tensions that may erupt into violence. And agitators may infiltrate refugee camps to exploit these tensions in ways that will embarrass the US.
Demonstrations at US government facilities are not limited to those in the US. US facilities in foreign nations can be locations of civil disturbances. DOD installations, US embassies, and US consulates in foreign nations are favorite targets of demonstrators. DOD installations in foreign nations are often scenes of protests against US foreign policies. The actual installation and its mission mayor may not be the true target. Often the installation is just used as a highly visible symbol of US government. American embassies and consulates also are subject to disturbances. They too are highly visible, concrete representations of the US government.
l\USSION OF MILITARY FORCES IN A CIVIL DISTURBANCE
The mission of the military forces in a civil disturbance is to help local authorities restore law and order. The preservation of law and order in the civilian community is the responsibility of state and local governments and law enforcement authorities. The preservation of law and order on the federal property of a military installation is the responsibility ofthe installation commander and military law enforcement authorities. The military performs civil disturbance operations in support of these local authorities. Most often the military is used to disperse unauthorized assemblages and to patrol disturbed areas to prevent unlawful acts. Military forces may be used to maintain the mechanics of essential distribution, transportation, and communications systems. Military forces are also used to make a show of force, set up roadblocks, cordon off areas, disperse crowds, release riot control agents, and serve as security forces or reserves, And the military may be tasked to initiate needed relief measures.
The commitment of military forces to civil disturbance control operations does not automatically give these forces police power. The police power ofmilitary forces is bound by legal constraints as well as humanitarian consideration. Only the degree of force reasonably needed in a circumstance is permitted. All military leaders and planners must be familiar with the laws, regulations, and policies that govern military involvement in civil disturbances. They must know the laws and policies that have a direct impact on military civil disturbance control plans and actions. Those laws and policies dictate how the
http://atiam.train.army.mil/portallatiaJadlsc/view/public/296872-1/fmlI9... 12/2812004 .
DODDOA-008749
~litary can and should act when controlling a civil disturbance.
Military control force commanders must know what options are available to them. Commanders must be able to be highly flexible and selective in their responses. A commander must select the option that is the best response to a given civil disturbance in that specific physical and psychological environment. He must be able to both reduce the intensity of the confrontation and restore order;
In all contacts with the civilian population and the participants ofthe disturbance, military forces must display fair and impartial treatment. And they must adhere to the principle ofminimum force. Whenever possible, civil police apprehend, process, and detain civil-law violators. Military forces perfonn these functions only when necessity dictates and only to the minimum extent required. These functions are returned to civil authorities as soon as possible. When military forces have achieved enough order to allow the local authorities to resume control, the military's mission is accomplished and their active role in controlling the disturbance ends.
As the disturbance subsides, the commander takes steps to restore control to the civil authorities. The control force gradually reduces the number and scope of its operations and begins removing its equipment from the area. But the control force takes care not to give the impression that all controls have been removed. Withdrawal is not immediate. That would create the impression of abandonment and could lead to a resurgence of the disturbance. The control force gradually withdraws in a phased return of control to civil authorities.
http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/frn/.... 12/28/2004
DODDOA-008750
CHAPTER 2

The Participants
A civil disturbance occurs only in a particular el1vironment. That environment is a fusing of cause, place, and willingly confrontive participants. Civil disturbance participants come from all walks of life. Participants cover the political spectrum from the far right to the far left. They range from members of special interest groups to the ranks ofthe unemployed. They may be environmentalists, anti-nuclear activists, or foreign and domestic opponents ofUS policy. They come from all age groups and from all classes.
They may be curious onlookers who have become swept away by the excitement of an event. They may be demonstrators or counterdemonstrators who have become emotional about their cause. Whoever they . are, they have become subject to the social and psychological factors that can tum a large gathering of people into a disruptive, disorderly mass. Understanding these factors can help reduce confrontation and permit order to be restored with a minimum of force.
The basic human element sparking a disturbance is the presence ofa crowd. There are almost as many types ofcrowds as there are reasons for people to assemble. There are casual crowds like the crowd that assembles for a football game or gathers at an accident. Persons in such a crowd probably have no common bonds other than enjoyment ofthe game or curiosity about the accident. And there are "planned" crowds like the crowd that assembles at the call of a leader to accomplish a goal. Members of a planned crowd have common bonds ofinterest and purpose.
Simply being a part of a crowd affects a person. Each person in a crowd is, to some degree, open to actions different from his usual behavior. Crowds provide a sense of anonymity because they are large and often temporary congregations. Crowd members often feel that their moral respOIisibility has shifted from themselves to the crowd as a whole. Large numbers of people discourage individual behavior; the urge to imitate is strong in humans. People"look to others for cues and disregard their own background and training. Only well-disciplined persons or persons with strong convictions can resist conforming to a crowd's behavior. Crowd behavior influences the actions of both the disorderly participants and the authorities tasked to control them.
Under normal circumstances, a crowd is orderly. It does not violate any laws. It does not threaten life or property. It does not present a problem to authorities. But when a crowd's collective behavior becomes unacceptable to the common good, cause for concern arises. When a crowd's lawabiding collective behavior breaks down and takes a dramatic form, a civil disturbance ensues.
Civil disturbances arise when a crowd-­
•
Gathers to air grievances on issues and transfers its anger from the issues to the people dealing
with the issues.

•
Swells uncontrollably as curious bystanders and sympathetic onlookers join forces with the
activists or protectors.

•
Is incited to irrational action by skillful agitators.

•
Adopts irrational behavior and becomes a mob.

•
Consists oftwo or more groups with opposing views, and they become engaged ina violent
confrontation.

http://atiam.train.army.mil/portaliatiaiadlsc/view/public/296872-I/finIl... 12/28/2004
DODDOA-008751
CROWD BEHAVIOR
Crowd behavior is influenced by the presence Or absence of social factors like leadership, moral
attitudes, and social uniformity. Crowd behavior is also influenced by the psychological factors of
suggestion, imitation, anonymity, impersonality, emotional release, emotional contagion, and panic.
Crowd behavior expresses the emotional needs, resentments, and prejudices of the crowd members.
However, a crowd only does those things that most ofits members want to do. The crowd is influenced by the concerns of its members as to what is right, based on local custom, convention, and morality. But the emotional stimulus and protection of being in a crowd encourages its members to unleash impulses,
aggressions, and rages that they usually restrain. When blocked from expressing its emotions in one
direction, a crowd's hostility often is or can be redirected elsewhere. In a civil disturbance environment,
any crowd can be a threat to law and order because it is open to manipulation.
Leadership has a profound effect on the intensity and direction of crowd behavior. In many crowd situations, the members become frustrated by confusion and uncertainty. They want to be directed. The first person to give clear orders in an authoritative manner is likely to be followed. When crowd members become frustrated, radicals can take charge. They can exploit a crowd's mood and tum them against a convenient target. A skiIlful agitator can increase a crowd's capacity for violence. He or she can convert a group of frustrated, resentful people into a vengeful mob. An agitator can direct a crowd's aggression toward any target included in their resentment. In fact, skillful agitators using television, radio, and other communications media can reach large portions of the population and incite them to unlawful acts without having direct personal contact. On the other hand, one person can sometimes calm or divert a crowd by a strategic suggestion or command. An experienced leader may be able to calm a crowd, appeal to the reasoning powers of its members, and avoid a serious situation.
Crowd behavior is influenced by emotional contagion. Excitement, transmitted from one person to another, creates a high state of collective emotion. Ideas conceived by crowd leaders and dominant crowd members pass rapidly from person to person. These ideas and the general mood of the crowd sweep to bystanders and curiosity seekers, who can become caught in the wave of excitement and crowd action. Emotional contagion exceeds the bounds ofpersonal contact. It can be passed by mass media.
Emotional contagion is especially significant in a civil disturbance environment. It provides the crowd psychological "unity." The unity is usually temporary. But this unity may be the only momentum a crowd needs to tum it to mob action. When emotional contagion prevails, self-discipline is low. Normal controls give way to raw emotions. Personal prejudices and unsatisfied desires, which usually are restrained, are readily released. This is a strong incentive for individuals to follow the crowd, to do things they have wanted to do but dared not try alone. This contagion can cause a crowd to lose its concern for law and authority. A crowd that follows its leaders into unlawful and disruptive acts becomes a mob. Mob behavior is highly emotional. It is often unreasonable. It is always potentially violent.
Panic also affects crowds. It prompts unreasoning and frantic efforts to seek safety. Panic is extremely contagious and spreads rapidly. In a state ofpanic, people become so irrational they endanger themselves and others. Panic can occur during a civil disturbance when crowds-­
•
Think or feel danger is so close at hand that the only course of action is to flee.

•
Think escape routes are limited or that only one escape route exists.

•
Think the limited routes are blocked or congested and passage is slowed or stopped.

•
Believe an escape route is open after it is blocked and in trying to force a way to the exit, cause

http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1lfinIl...!. 12/28/2004
DODDOA-008752
. those in front to be crushed, smothered, or trampled.
• Are not able to disperse quickly after being exposed to riot control agents and begin to believe
their lives are at risk.

Like participants. contro/force members are a/so susceptible to crowd behavior. They, too, are likely to become emotionally stimulated during a tense confrontation. The highly emotional atmosphere of a disturbance can infect control force members despite their disciplined training. When emotional tension is high, members may lose their feeling ofrestraint. Then they may commit acts they normally would suppress. Emotional contagion can also make a control force easily affected by rumor and fear. Commanders must' watch for this and counteract it quickly.
In a large control force dealing with masses of demonstrators, control force members can lose their sense ofindividuality. Control force members must not be allowed to develop a feeling of anonymity. Leaders must know their subordinates' names and address them by name at every opportunity. Commanders must ensure that soldiers ofquestionable emotional stability or with strong prejudices against the group being controlled do not participate directly in civil disturbance control operations.
Control force members, like crowd members, tend to imitate the actions ofothers. One improper act copied by others can result in a chain ofwrong behavior. But rigorous training, effective supervision, and immediate correction ofimproper acts can prevent this. During confrontations a control force also must guard against coming to see the participants impersonally rather than as people. The control force should have a racial and ethnic balance to reduce the chance of seeing the disturbance as a confrontation between "them" and "us." Some control force members may harbor ill feelings toward people who look, think, or behave unlike themselves. If they take advantage ofthe confrontation and show their ill will, their behavior will inflame rather than reduce a confrontation. A control force must be thoroughly briefed on fair and impartial performance oftheir duties. All members ofthe control force must be aware that they are accountable for all their actions.
CRO\VD TACTICS
In civil disturbances, crowds employ any number oftactics to resist control or to achieve their goals. Tactics may be unplanned or planned, nonviolent or violent. The more purposeful the disturbance, the more likely is the possibility ofwell-planned tactics.
Nonviolent tactics may range from name-calling to building barricades. Demonstrators may converse with control force members to distract them or to gain their sympathy. Demonstrators may try to convince control force members to leave their posts and join the demonstrators. They may use verbal abuse. Obscene remarks, taunts, ridicule, and jeers can be expected. Crowd members want to anger and demoralize the opposition. They want authorities to take actions that later may be exploited as acts of brutality.
Sometimes women, children, and elderly people are placed in the front ranks. This plays on a control force's sympathy to try to discourage countermeasures. When countermeasures are taken, agitators take photographs to stir public displeasure and to embarrass the control force. Demonstrators may form human blockades to impede traffic by sitting down in roads or at the entrances to buildings. This can disrupt normal activity, forcing control personnel to physically remove the demonstrators. Demonstrators may lock arms, making it hard for the control force to separate and remove them. It also makes the control force seem to be using excessive force.
Groups of demonstrators may trespass on private or government property. They want to force mass
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008753
arrests, overwhelm detainment facilities, and clog the legal system. Or demonstrators may resist by going limp, forcing control force members to carry them. They maychain or handcuff themselves to objects or to each other. This prolongs the demonstration. Agitators may spread rumors to incite the crowd and to try to force the control force to use stronger measures to control or disperse the crowd. The agitators want to make the control force appear to be using excessive force. Terrorist groups may try to agitate crowds as a diversion for terrorist acts. They also try to provoke an overreaction by the control force.
Mass demonstrations tend to consist ofpeople on foot. But sometimes groups organize mobile
demonstrations using cars, vans, and trucks. Mobile groups often coordinate their actions by CB radios
and walkie-talkies. Demonstrators also may monitor police frequencies by using scanners. They may
even try to use transmitters to jam police communications or to confuse control forces through
misinformation.
Violent crowd tactics, which may be extremely destructive, can include physical attacks on people and property, setting fires, and bombings. Crowd use ofviolent tactics is limited only by the attitudes and ingenuity of crowd members, the training oftheir leaders, and the materials available to them. Crowd or mob members may commit violence with crude, homemade weapons. Or they may employ sophisticated small arms and explosives. Ifunplanned violence occurs, a crowd will use rocks, bricks, bottles, or whatever else is at hand. If violence is planned, a crowd can easily conceal makeshift weapons or tools for vandalism. They may carry-­
•
Balloons filled with paint to use as "bombs."

•
Bolt cutters to cut through fences.

•
Picket signs' to b~ used as clubs.

•
Pipes wrapped in newspapers to throw as deadly missiles.

•
Firecrackers dipped in glue and covered with BBs or small nails to use as deadly grenades.

•
Plywood shields and motorcycle helmets to protect against riot batons.

•
Safety goggles to protect against tear gas.

A crowd may erect barricades to impede troop movement or to prevent a control force from entering certain areas or buildings. They may use vehicles, trees, furniture, fences, or any other material that may be handy. In an effort to breach barriers, rioters may throw grapples into wire barricades and drag them. They may use grapples, chains, wire, or rope to pull down gates or fences. They may use long poles or spears to keep control forces back while removing barricades or to prevent the use ofbayonets. They also may crash vehicles into gates or fences to breach them.
Rioters can be expected to vent their emotions on individuals, troop formations, and control force equipment. Rioters may throw rotten fruits and vegetables, rocks, bricks, bottles, improvised bombs, or any other objects at hand from overpasses, windows, and roofs. In the past, troops, firefighters, and utility workers on duty during a civil disorder have been beaten, injured, or killed. Vehicles have been overturned, set on fire, or otherwise damaged.
Rioters may direct dangerous objects like vehicles, carts, barrels, and liquids at troops located on or at the bottom of a slope. On level ground, they may drive wheeled vehicles at the troops, jumping out before the vehicles reach the target. This tactic is also used to breach roadblocks and barricades.
Rioters may set fire to buildings and vehicles to block the advance oftroops. Fires are also set to create confusion or diversion, to destroy property, and to mask looting and sniping. Rioters may flood an area with gasoline or oil and ignite it. Or they may pour gasoline or oil down a slope or drop it from
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/finI1... 12/28/2004
DODDOA-008754
buildings and ignite it.
Weapons fire against troops may take the form of selective sniping or massed fire. The fire may come from within the ranks of the rioters or from buildings or other adjacent cover. The weapons used can vary from homemade one-shot weapons to high-powered rifles. Snipers may try to panic control force members into firing a volley into the crowd. Innocent casualties make a control force appear both undisciplined and oppressive.
Explosives may be used to breach a dike, levee, or dam. Bombs can be exploded ahead oftroops or vehicles so rubble blocks a s.treet. They can be used to block an underpass by demolishing the overhead bridge. In extremely violent confrontations, bombs placed in buildings may be timed to explode when' troops or vehicles are near. Demolition charges can be buried in streets and exploded as troops or vehicles pass over them. Explosive-laden vehicles can be rolled or driven at troops. Animals with explosives attached to their bodies can be forced toward troops to be set offby remote control. Even harmless looking objects like cigarette lighters and toys have been loaded with explosives and used.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-I/frnI1... 12/28/2004
DODDOA-008755
CHAPTER 3

Federal Intervention
Federal intervention in civil disturbances begins with the .issuance of a presidential proclamation to the citizens engaged in the disturbance. The proclamation directs all persons engaged in acts of domestic violence and disorder to cease and desist and to disperse and retire peaceably. If the proclamation is not obeyed, the President issues an executive order directing the use of federal forces to suppress the violence and authorizing the Secretary of Defense to use whatever forces are needed to accomplish the mission. Federal intervention in a civil disturbance ends when order is restored and the Secretary of Defense directs the withdrawal of federal forces.
CIVIL DISTURBANCES IN CIVILIAN COMMUNITIES
A state requesting federal help to restore and maintain law and order addresses its request to the Attorney General of the United States, the chief civilian officer in charge of coordinating all federal
activities relating to civil disturbances. The Attorney General has been designated by the President to receive and coordinate preliminary requests from states for federal military assistance. (Applicants presenting a request to a local commander are informed of the need to address the request to the Attorney General. The commander then immediately informs the Director of Military Support of the request and any facts pertaining to it.) When a request for federal assistance is received by the Attorney General, he sends a representative to assess the situation and make recommendations.
When the representative's assessment shows Plat a need for federal assistance exists, the Attorney General advises the President, who issues the proclamation directing that order be restored. Ifthe disorder continues, the President issues the executive order directing the Secretary of Defense to employ such National Guard and federal troops as are needed to restore law and order. The Secretary ofthe Army alerts and, if necessary, pre-positions control forces through the CSA, but such forces do not become involved in the disturbance until the executive order is issued.
When directed by the Secretary of the Army the CSA directs the FORSCOM commander in CONUS or appropriate commanders in US territories outside CONUS to position ground forces near disturbance areas or to move such forces into disturbance areas. The CSA alerts the Air Force to provide required air transport. He tasks other military services and DOD components to provide military resources as planned and required. He also informs the JCS, and commanders ofunified commands if the operations are outside CONUS, ofthe actual or potential use of military resources.
Civil disturbance deployment occurs as follows:
1.
Following coordination with the JCS (and OCONUS commanders, if applicable), the CSA issues a warning order or CIDCON message. This is done as far in advance as possible to allow airlift and ground force preparedness measures to begin. (For more information on CIDCONs, see Appendix.)

2.
The FORSCOM commander (in CONUS) or commanders of unified or designated commands (OCONUS) nominate the task force commander and units to make up the task force.

3.
CSA (COMAAC in Alaska) directs the designated task force commander and his staff to reconnoiter the disturbance area to assess the situation. The reconnaissance is made in civilian clothing using commercial transportation and communications equipment. .

http://atiam.train.army.millportal/atialadlsc/view/publicI296872-1/fmll·9-15/CH3.h~ .. __.. J2/28/2004
DODDOA-008756
4: The National Guard Bureau chief notifies the state or territorial adjutant general of the task force commander's arrival.
5.
The task force commander submits recommendations concerning the commitment of federal forces directly to the CSA within two hours ofhis arrival in the disturbance area.

6.
Meanwhile, the FORSCOM commander or appropriate commander OCONUS ensures that the military forces are prepared to move. In CONUS the FORSCOM commander submits airlift and surface transportation requirements for all designated ground forces to Director of Military Support. Outside CONUS the commanders ofunified or designated commands provide transportation within their capabilities. When additional transport is needed, they submit their request to the Secretary ofthe Army. Ifadditional units are needed from CONUS forces to augment the forces assigned to the command concerned, REDCOM nominates the required units, provides surface transportation, and submits airlift requirements to the Secretary ofthe Army.

7.
At the appropriate time, the CSA (COMAAC in Alaska) issues a letter of instruction to the task force commander. The content of the letter ofinstruction-­

•
Provides for planning and preparatory actions when received. It is effective for execution on order ofthe CSA. .

•
Specifies the task force commander's mission and designates the task force units. It also instructs

the commander to be prepared to assume operational control ofadditional federal troops and . others when so ordered. .

•
Designates a command post location and authorizes direct communication with other armed forces commanders in the vicinity.

•
States that the task force commander will consult with the Attorney General's senior civilian representative, who will coordinate the federal civilian effort and assist the task force commander's liaison activities with civil authorities. .

•
Directs the task force commander to cooperate with, but not take orders from, civilian law
enforcement officials.

•
Advises that an on-site DOD public affairs chiefwill be designated to furnish public affairs advice and guidance.

•
Designates a personal liaison officer to provide assistance and advice.

•
Designates the Director ofMilitary Support as responsible for setting up and maintaining
communications between the task force and the Director ofMilitary Support watch team.

•
Provides specific instructions on the applications offorce, the use and control offirearms, the detention of civilians, searches ofindividuals and private property, and cooperation with civil police in these matters.

•
Directs the submission of situation reports to DA at stated times and ofinterim reports on major changes or significant events.

•
Provides a code name for the task force for communications purposes.

8. When the task force commander receives an execution message directing him to proceed with his ,mission, military forces move into the disturbance area, and the task force commander assumes command of all military forces placed under his OPCON. At the discretion ofthe CSA, the liaison officer is withdrawn or remains in the area to assist the task force commander.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008757
UNIT CIVIL DISTURBANCE PROCESS
.....----...... DEVELOPS CONTINGeNCY PlANS
INCREASES UNIT UNIT DESIGNATED FOR CIVIL DISTURB· ANCE CONTINGENCY

READINESS STATUS
• ONGOING PROCESS

CIVIL DISTURBANCES ON DOD INSTALLATIONS
When a civil disturbance occurs on a US DOD installation, commanders immediately take action to control the disturbance. Commanders have the authority and responsibility to control the personnel under their military jurisdiction. And commanders have the authority to apprehend and restrain or remove fromthe installation those persons who do not come under military jurisdiction. A commander may exercise this authority by taking such actions as are reasonably necessary and lawful based on applicable regulations.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm119... 12/28/2004
DODDOA-008758
In general, a commander's employment ofthe installation's military, law enforcement and security forces is sufficient to fragment, and carry out civil disturbance operations on the military reservation. (Before using nonmilitary installation security forces during civil·disturbance operations, commanders obtain advice from the SJA. The SJA advises on DOD policy limiting or prohibiting the use ofDOD civilian police and guards or contract security guards for civil disturbance.) But additional Federal aid may be requested if a civil disturbance presents a threat to persons, property, or functions on an installation or activity and the threat is beyond the combined capabilities of local resources.
The installation or activity commander requests support through appropriate channels to the Director of Military Support. He also advises the appropriate HQDA staff agency ofthe request. If an installation commander learns of a need to protect other federal property or functions, he notifies the Director of
Military Support through command channels. At the direction ofHQDA, FORSCOM and MDW commanders employ augmentation forces to reinforce the internal security forces of installations and
activities.
Ifthe civil disturbance erupts so suddenly that notifying DA and awaiting instructions through normal
channels presents a danger to life and property, an active Army troop commander may take such actions
as the circumstances justify. Actions taken without prior authority must be for the protection of life, the preservation of law and order, and the protection of property. The overall situation may cause the
commander at the site to limit his mission to the protection oflife and federal prop~rty. The officer taking such action immediately reports his action and the circumstances requiring it to the Director of Military Support.
On DOD installations overseas and at US embassies and consulates, because ofthe possible international political ramifications offoreign civil disturbances, host-nation forces generally control disturbances targeted at US facilities. Status of forces agreement define the legal considerations that guide and constrain actions by US military commanders. Commanders must have an effective liaison with host-nation authorities. Through close coordination with host-nation authorities, US commanders can determine the level ofvisibility and the involvement, if any, of US forces.
COMMAND AND CONTROL
Unlike conventional military operations under a unified command, civil disturbance operations may not have a single commander with the required authority to direct all control forces. When federal forces are deployed to enforce US laws because civil authorities have not or will not, the federal forces serve as a part of the military power ofthe United States and act under the orders ofthe President. The Secretary of the Army, through the Army Chief of Staff, directs the federal forces committed for civil disturbances. At a disturbance site, the task force commander has operational control of military ground forces. The on-site commander accomplishes his mission under the authority of reasonable necessity. That authority, however, is subject to instructions he receives from his superiors.
The issue of command and control is more complex when federal forces are deployed to help civil authorities control a disturbance. The federal forces are under the command of their superiors in the military chain ofcommand. They cannot be placed under the command ofunfederalized National Guard nor local or state civil officials. Ifdirected by the Army Chief of Staff, commanders can be made responsible to authorized federal civil officials.
The task force commander has command and control of all federal forces including the federalized National Guard. National Guard units subject to a call or order to federal active duty must be thoroughly familiar with the provisions of AR 135-300 and be prepared to meet the requirements. Special attention
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008759
must be paid to having troops oriented on their status as federal troops and on their mission. When a state's National Guard is federalized by the President, the letter ofinstruction to the task force commander usually states that he is in command ofthe National Guard units. The military chain of command and the rank structure then operate as usual.
CIVIL DISTURBANCE COMMAND RELATIONSHIPS
I SEC~ETARV or THE ARMY J
AS OOD EXfClITlvr AGENT
I

..........................

CHlf!' or STArr. USA
COMMANOEAS OF
. -: : : .
(CS41
OESIGNAfE.() OCONUS

UNlfll:O AND
: I CHIFF Of I:JCII~F~ or SlArr I
: NAVAL •
UIFIECTOR OF MILIIAH'I Su.."OAf
COMMANDS : OPfiRATlONS :" AIR FORCF
..........

. ..
.....
. : . :. . .
.....
"',
ICOMI.AANOANT J ICOMMAf\:OANTJ
......
MAA~ECOR~ COASIOUARD
........
....
I ..... I COMMANDER FOIISCOM
TASK FORCF SENIORNOMINAfES .
COMMANDER OOMMANVEFI • OIAEClS CI"'I.IAN
TASK rORCf. -j-TRADoe

1-----­
~
TASK FOP.CE
Htl'KI:SI:NTAT V'ECOMMANDERTRAINING SUPPORT OP£RAlI()NS . II I\NO UNITS
I
I
I
,
0 •
I . I COMMANDEIlS
____ ______.JI 0 I
~
CSA'5 PFRSONAL LOCAL
LIAISON OFI'Ir.ER ..NI) lI..ISON TrAM
0 ~-.
INSTAU.ATlO~S
0 ••
I I
0
I
LOCAL AAU SlATE
Cl I
O~~ICIA.LS
Cl t
1--­
c.:OOIl D't, ATE -OlftECT10N Cl
I'lANS ANO OPtHAflONS
•• COOROINATlOI't AUntOR1TY 0
--COOR04N4TION/SUPPORT Cl
Cl OPERATIONAl. CONTROL.

TASK FORCE
~TA.SKING A\STHORnY

____---/ I ~-----___
S USN US~C USAr -U A. GHOUND GAO~O GROlJNO USCG. FORCfS FORCES FOR .ES "ORC!;! fOACES

But, just as the task force commander does not tum his command over to civilian authorities, civilian authorities are not required to tum their local and state police over to the task force commander. And civilian police cannot be federalized. Thus operational unity sometimes must be sought through such means as collocating operational centers, integrating communications systems, and establishing organizational responsibilities.
Even on federal installations, the control force may consist of more than military forces. US marshals, DOD police or guards, and contract security guards may have a role in protecting an installation and preserving order. Responsibilities ofnonmilitary security and law enforcement agencies must be consistent with legal restrictions and prohibitions on their use. Job descriptions, contracts, and local laws detennine how these agencies can be used to protect the installation and what duties they can perfonn.
Military authorities cooperate with civilian law enforcement officials to the maximum extent possible consistent with-­
•
The tradition of limiting direct military involvement in civilian law enforcement activities.

•
National security needs and military preparedness.

•
The requirements of applicable law.

http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-I/fm/19... .htm 12/2812004
DODDOA-008760
The task force commander cooperates to the fullest extent possible with the governor and other civil authorities and forces unless, or until, such cooperation interferes with the mission. The task force commander, when he reasonably can, honors requests for help from civil authorities. He may direct elements of his command to assist civil authorities, but he does not place military personnel under the command of civilians. This does not preclude such measures as having joint patrols and jointly-manned fixed posts.
TASK FORCE ORGANIZATION
An effective civil disturbance task force depends on an organizational structure that allows for inclusi~n ofa variety of military units and personnel, including National Guard and reserve units. It also must allow for the possible integration of military units and civilian agencies within an overall force structure. The organization must take into account the responsibilities of the civil authorities and agencies that will be a part of the control force. This includes not only law enforcement agencies but community support agencies as well. Units organized for a civil disturbance mission must be in accord with the organizational principles of:
•
Essentiality.

•
Balance.

•
Coordination.

•
Flexibility.

•
Efficiency.

Each part of the organization must be needed to accomplish the mission. Each element of the organization must be designed to do its part of the mission effectively without duplicating the missions of the other organizational elements. The organization must provide effective channels of communications to ensure complete coordination ofall plans and operations and to prevent gaps and overlaps. The organization must be designed to perform its mission without disruption as the operation changes in scope or as the environment changes. A unit's ability to task-organize to meet mission needs, and to do so quickly, is imperative for civil disturbance operations. The total organization must provide for the efficient use of men, money, material, and facilities.
The DA Civil Disturbance Plan, known as Garden Plot, provides guidance to all DOD components in planning civil disturbance missions. It addresses the use of military resources for civil disturbances. It sets the requirements for DOD representation at a task force's headquarters. It is published under the authority of the Secretary ofthe Army, DOD's executive agent for military involvement in civil disturbances. The FORSCOM commander publishes guidance on model Garden Plot organizations for FORSCOM and TRADOC units. The Director ofMilitary Support maintains the DA Civil Disturbance Plan.
TASK FORCE CONTROL ELEMENT
Responsibility for controlling the civil disturbance resides with the task force. Its control element consists of the command group and the crisis management team. The command group of city, county, state, and military command personnel sets policy and issues directives. They coordinate the activities of civil and military support agencies, supervise the crisis management team, and coordinate with outside agencies. The CMT, made up ofrepresentatives of civilian and military staff sections, advises the command group and coordinates operations and support for the action element of the task force. The control elements locate in an EOC to facilitate information processing, resource management, and operational control. Ifcommunity leaders have established an EOC, the task force commander may use
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-lIfm119...
DODDOA-008761
the EOC for his command post. Ifan EOC has not been set up, the commander establishes one 'and makes provisions for including civil authorities to ensure a unity ofeffort.
Not all CMT members are located at the EOC. Some key people may use liaisons to represent them at the EOC. The key people can then research and discuss ideas freely, away from the confusion associated with crisis management. The liaison can transmit guidance and answers to the EOe. Some agencies may not be needed in the EOC. Still, they may need to be notified to be prepared for inclusion. Inclusion in the EOC is based on the likelihood of an agency having to take an action or a support role and on the agency's importance to the mission. .
TASK FORCE ACTION ELEMENT
The threat management force is the action element ofthe task force. The TMF carries out the orders of the command group to accomplish the overall mission ofrestoring order. The command group employs the TMF consistent with the rules of force and the force options. The TMF consists ofthree subelements: the control force, the negotiation team, and the special reaction team. The control force perfonns most of the operational tasks. The negotiation team establishes and maintains communications with demonstration leaders, ifpossible, and reduces the threat to life in special circumstances like hostage situations or bomb threats. The special reaction team serves as the final force option for handling special threats like snipers or hostage takers. When federal forces are supporting civil authorities, the TMF, like the command group and CMT, is likely to be a mix of civil and military components. Civilian and military control force assets often perfonn control force tasks jointly. However, civilian negotiations teams should be used rather than USACIDC negotiations teams whenever possible. And military SRT assets are used only when civilian SRT assets are not available in civilian communities.
Control Force
The diversity of missions in civil disturb ante operations creates the need for simultaneous commitment of forces in a variety ofoperations. The control force must be task-organized to accomplish the mission. The control force must be composed ofsmall units able to function separately, as well as part of the total force. The small units and teains must be able to be committed independently ofeach other. The small units must be responsive to changes in the situation. And they must be able to react immediately to their leaders' orders.
Small-unit leaders must receive clear, specific, and complete guidance so they know what actions to take to deal with rapidly changing situations. Clearly defined responsibilities must be assigned and exercised at the lowest practicable level. Small-unit leaders must have adequate authority to allow them to do their jobs effectively. At the same time, organizational development must be based on unit integrity. For example, in an infantry unit the squad may be considered the basic patrol unit. Ifsmaller units are needed, fire teams can be used. Other types of units may have to organize in a similar: fashion.
Military police units are particularly well suited for employment in civil disturbance operations. MP are trained and experienced in orderly confrontation management. With very little augmentation, an MP company possesses the basic capabilities needed for successful civil disturbance operations. MP capabilities include mobility, communications, and a structure that readily adapts to task organization. MP units also have special equipment, such as hand irons, recognizable symbols ofauthority, and vehicle emergency equipment. MP units are routinely task-organized to accomplish MP missions. This makes the transition from one configuration to another relatively easy for MP.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008762
Negotiation Team
The negotiation team's primary purpose is to assist in hostage situations that may accompany a disturbance. The team's mission is to ·peacefully resolve the event. It is preferable that civilian teams be employed for hostage negotiations. The task force commander coordinates with civil authorities to obtain this support. Ifcivilian negotiators are unavailable, he coordinates with USACIDC for a team of trained hostage negotiators.
TASK FORCE RELATIONSHIPS
.. Provides command and control -.-.. ..._-----Provides support

A USACIDC negotiation team usually consists ofa team leader, a coordinator, a record keeper, and trained negotiators. A linguist may be added if a language other than English is spoken by many residents in the disturbance area, especially OCONUS. The team leader coordinates the team's efforts.
http://atiam.train.army.mil/portallatialadlsc/view/public/296872-1/frn11... 12/2812004 .
DODDOA-008763
He commands the team and ensures that the negotiator is located away from the mainstream ofCP operations, free from distractions and interference. He also keeps the negotiator apprised of needed intelligence. The coordinator collects re ported intelligence. His work is extensive when collecting intelligence on hostages, hostage takers, weapons and explosives, and the seige area. He gets intelligence from many sources, including the control force, witnesses, released hostages, and family members. The record keeper maintains a chronological record of all conversation between the negotiator and subjects, especially when dealing with hostages and hostage takers. He keeps a separate list of any and all demands and deadlines set by hostage takers. He also keeps a separate list of any and all promises and deceptions made by the negotiator.
Hostage negotiators establish a rapport with hostage takers to prolong contact and promote concessions while allowing demands to be delayed or refused. Prolonging the situation. by constructively stalling for time produces advantages for the control force. These advantages are:
•
The longer a situation is prolonged, the more intelligence can be gathered on the location,
motivation, identity, and modus operandi of the hostage taker.

•
The passage oftime generally reduces anxiety, allowing the hostage taker to assess the situation rationally.

•
Given enough time, one, some, or all of the hostages may find a way to escape on their own.

•
In time, hostage takers may tire or fall asleep. This would allow peaceful resolution of the
situation.

•
The necessary' resolve to kill or to hold out lessens with time.

•
Time gives the hostage taker a chance to make the mistakes on which an alert control force can capitalize.

•
Transference, also known as the Stockholm Syndrome, may take effect (see TC_19-16).

The negotiation team also can be very helpful when control force representatives meet with demonstrators to communicate concerns of the control force, to resolve issueS allowing withdrawal from occupied buildings, or even to plan ways permitting peaceful demonstrators in a disturbed area. In these circumstances, the negotiator serves 'as a "neutral" who attempts to align the interests of the subjects with the responsibilities of the control force. The negotiator strives to-­
•
Be a mediator, not an arbitrator.

•
Allow the subjects to set the pace, mood,and topic of conversation.

•
Accept the subject's views neutrally, expressing neither approval nor disapproval.

•
Keep the subjects talking.

http://atiam.train.army.millportallatialadlsc/view/public/296872-1/fin/1... 12/2812004
DODDOA-008764
SUGGESTED NEGOTIATION TEAM EQUIPMENT

•
STANDARD AUDIO CASSETTE TAPE RECORDERS AND 10 HOURS OF TAPES.

•
MICROCASSETTE AUDIO TAPE RECORDERS AND 10 HOURS OF TAPES.

•
VIDEO RECORDING EQUIPMENT.

•
ELECTRONIC MONITORING EQUIPMENT.

•
EAR MICROPHONES FOR TELEPHONES FOR RECORDING AND LISTENING.

•
PORTABLE TYPEWRITERS AND OTHER WRITING SUPPLIES.

•
FIELD TABLES AND CHAIRS.

•
PUBLIC ADDRESS SYSTEMS OR BULLHORNS.

•
RELIABLE COMMUNICATIONS FOR USE BETWEEN THEMSELVES AND THE SUBJECTS.

•
HAND-HELD RADIOS.

•
PROTECTIVE MASKS.

•
INDIVIDUAL CONCEALABLE BODY ARMOR.

The negotiation process is physically and mentally exhausting. Hostage situations especially are often
lengthy. It is recommended that each team have two negotiators. If more than one negotiator is used, a
gradual shift from one negotiator to another helps to maintain the desired level of rapport. Successful
negotiators are mature, mentally and emotionally stable, and neither overbearing nor antagonistic in
their attitudes. They are experienced in communication techniques, including being good listeners. They
also are sincere, flexible in their dealings, and physically fit.
Special Reaction Team
Ifhigh-risk incidents posing a grave danger occur during civil disturbance.operations, the control force must have access to specially-trained teams to neutralize the special threat effectively and safely. Special threat incidents include-­
•
Hostage rescues.

•
Barricaded criminals.

•
Barricaded criminals with hostages.

•
Sniper incidents.

•
Terrorist incidents.

•
Apprehensions of dangerous suspects.

•
VIP protection and escort.

•
Threatened suicides.

•
Search and evacuation operations.

•
Barricaded, mentally disturbed people.

The control force commander can quickly and successfully resolve a special threat by requesting the support ofan SR T. A highly-motivated, well-conditioned team specially equipped and trained to function as a tactical unit can be effectively and safely employed in such special threat situations. The commander uses civilian SRTs, ifpossible. If civil authorities do not have SRT assets, then a military SRT may be employed. A low-level threat only requires a general SRT manpower and equipment response capability. A sophisticated threat, posed by groups having unique abilities and seeking specific targets, requires responding SRTs to possess specialized training and equipment.
SRT actions are based on a thorough knowledge of the situation, a tactical plan, and a ininimum use of deadly force. The priority of actions by SR Ts during an operation is-­
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-11fm/19... 12/28/2004
DODDOA-008765
I. Protecting lives, including hostages, law enforcement personnel, bystanders, suspects, and offenders.
2.
Securing the safe release of hostages.

3.
Apprehending the offenders.

4.
Isolating and containing the incident.

5.
Gathering information and intelligence. This is a continuous responsibility from the start of an incident until its resolution.

6.
Protecting property and equipment.

7.
Conducting an assault if all other available options have been exhausted or the situation has deteriorated to the point where loss oflife is considered imminent. An SRT assault is a last resort.

These priorities apply to nearly all special threat situations. The one exception to these priorities is a special threat situation involving a nuclear weapon. The recovery of the weapon is the overriding consideration. See AR 50-5.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm119... 12/2812004
DODDOA-008766
CHAPTER 4

Information Planning and Threat Analysis
Information is the key to developing civil disturbance plans. Who are the demonstrators? When and where will they demonstrate? What are their capabilities and possible courses of action? A civil disturbance task force commander's need for current, valid infonnation cannot be overemphasized. He must learn as much as he can about the participants, their motivations, their strategies and tactics, their targets, and their dedication. The more knowledge he has about the participants, the better equipped he is to counter their actions. He needs sound infonnation to decide how best to use his available resources.
To be useful, collected data must be processed into "intelligence." It must be seen in relation to the
social, economic, arid political climate of the area, and the likelihood of active participation or support
from the local populace. Obtaining and developing intelligence in a timely manner is a top priority in order to use the infonnation to assess the threat. Threat analysis begins with a broad examination of all infonnation bearing on the security of an installation or a community. It focuses on potential threats. It identifies likely targets and vulnerabilities. Completed, it-enables a commander to assess the threat of a .
civil disturbance to an installation, a mission, or a community. It fonns the basis for his operational plans to counteract a civil disturbance.
INFORMATIO:\ NEEDS AND SOURCES
Planners must decide what data is needed to develop a threat assessment. They must also develop a list of infonnation sources. Planners must be able to obtain infonnation quickly during a disturbance. And they must have ways to obtain infonnation from many sources at once.
Useful infonnation can come from open sources. law enforcement sources, and military sources. Having a diversity of sources is the best approach. Infonnation from many sources. prevents biased behavior.
Open sources of infonnation are perhaps the most overlooked valuable sources of infonnation. The installation library is usually a good source of infonnation. It may have a wealth of open-source material on past and current political events relating to a disturbance. Newspapers and news periodicals are also good sources of infonnation. They run articles or special sections on events that may lead to or have led to a disturbance. Often, they publish interviews with organizers. These interviews may provide insights into the thoughts, perceptions, and intentions of a crowd's leaders. Radio and television interviews are very infonnational. And they provide more real-time infonnation than newspapers, which have less flexible deadlines. In some cases, radio and TV provide live coverage of a disturbance. For this reason access to a TV and a radio is a must.
Law enforcement sources can provide useful infonnation on criminal activists. Provost marshals, military police, and criminal investigators routinely work with criminal infonnation. Infonnation also can be obtained from local, state, and federal law enforcement agencies. Criminal infonnation provided by law enforcement agencies may reveal potential agitators. It also may provide infonnation on criminals or terrorists who may try to exploit a disturbance.
The intelligence community is the most restricted source ofinfonnation. Liaison with agencies that routinely collect infonnation or intelligence is needed to know if they can support civil disturbance control operations. The DOD intelligence organizations operate under limitations imposed by regulations and executive orders. Attempts to skirt these restrictions may violate regulations or federal
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fmJ19... 12/28/~004 ~_
DODDOA-008767
statutes. But intelligence organizations often can provide important, reliable data for operational planning within these" limitations. Local MI field offices must be an integral part ofall plans. They know the rules for collecting and storing intelligence. And they can provide valuable advice in this area. Ifany doubts arise about the legality ofcollecting and storing intelligence,' the SJA must be consulted.
[\FORMATION RESTRICTIONS
Collecting infonnation related to a civil disturbance is strictly limited to protect the civil rights of people and organizations not affiliated with DOD. Civil disturbance plans and materials must not include lists of groups or people not affiliated with DOD. But lists of local, state, and federal officials who have direct responsibility for the" control of civil disturbances are exempt. Data on vital public, commercial, and private facilities that are believed to be civil disturbance targets also are exempt from this prohibition. Infonnation on civilians and civilian organizations can be collected only with specific authorization from the Secretary or the Under Secretary ofthe Anny. Conditions for collecting infonnation include the existence of threats against Anny personnel, functions, or property. (See AR 3_80:J3 and AR381:.l0.) Civil disturbance infonnation available in public documents, or open source infonnation, may be collected. But specific rules regarding its storage must be followed. Commanders must coordinate with SJA, MI, and USACIDC personnel before collecting any such infonnation. The Anny cannot gather, process, store, or report infonnation on civilians unless civilian activities can be linked directly to a distinct threat of a civil disturbance that may involve federal military forces. Even when infonnation can be collected, certain restrictions apply. The key restrictions include the following:
•
Computerized data banks for storage ofcivil disturbance infonnation are established or retained
only with the approval of the Secretary ofthe Anny.

•
Civil disturbance infonnation relating to persons or organizations is stored only when DA so
orders.

•
Spot reports generated by infonnation collection efforts must be destroyed within 60 days after the disturbance ends.

•
After-action reports may, for clarity's sake, contain names ofpeople and organizations who were
directly involved in the civil disturbance being reported. But the inclusion of names must be kept
to an absolute minimum.

•
When a civil disturbance ends, the nature and extent of all accumulated files other than spot
reports and after-action reports must be reported to DA. The report also must recommend that the
Department of Justice either release the files or destroy them.

Classification ofinfonnation also limits storage, access, and handling. In general, classified infonnation cannot be shared with local and state law enforcement agencies. This restriction can hinder working relationships with these agencies. The law enforcement agency may see the military only as a receiver of intelligence, providing nothing in return. Ifthis problem arises, and time is available, planners can ask the source to release an unclassified version. Secure transmission capabilities must be used to discuss any portions of classified infonnation being requested.
If the Department ofJustice detennines federal intervention in a civil disturbance is likely, infonnation relating to the disturbance is provided to the Anny Assistant Chief of Staff for Intelligence. The infonnation is analyzed and then provided to the Director of Military Support and the task force commander for planning purposes.
Military intelligence collection efforts, except liaison, may begin only when DA so orders. During a civil disturbance, the orders must come through the CSA's personal liaison officer and the task force commander. Covert operations to gather infonnation on nonDOD individuals and groups must be
http://atiam.train.army.millportallatiaJadlsc/view/public/296872-1/fm119... 12/28/2004
DODDOA-008768
approved by the Under Secretary of the Army. Such approval is on an operation-by-operation basis, and it must come through the personal liaison officer and the task force commander.
When DA approves collection efforts, MI elements establish and maintain liaison with the appropriate local, state, and federal authorities. Using these liaisons, the MI elements collect information on incidents and the general situation. They estimate the civil authorities' ability to control the situation. Based on current plans, they report the results of their collection efforts to DA. They keep the
appropriate commander informed. They provide intelligence support to the personal liaison officer and the task force commander. They also recommend other overt collection methods to DA for DA approval.
THREAT ANALYSIS
Threat analysis'is a fluid and continuous process. As data for the analysis cha.'lge, so do the results. Planners must adjust their plans to incorporate changes that occur during the threat analysis.
Three kinds ofinformation are analyzed to produce a valid threat analysis: intelligence ~dcriminal information, threat information, and installation/community vulnerabilities. Intelligence and criminal information provide information on the goals, methods of operation, techniques, strategies, tactics, and targets ofindividuals and groups. Threat information identifies individuals and groups. Vulnerability information identifies security weaknesses and high-risk targets.
Both subjective and objective information are analyzed. Public perceptions are compared with more objective, measurable information. This can show how much public opinion differs' from the objective measurement. Key factors to be analyzed include:
•
State of the economy.

•
Standard ofliving.

•
Effectiveness oflaw enforcement.

•
Stability ofthe government and ofth"e population's social and economic situation.

•
Morale of the populatioJ?, their support of the government, and the government's support of them.

Some factors change slowly or infrequently. These factors include the terrain of the area being analyzed and the political and ethnic traits of the population. Dynamic factors like weather, economic conditions, and security and law enforcement resources change often. Some dynamic factors can be controlled. Movements ofmoney and weapons, security of local sites, and allocations ofmilitary personnel can all be controlled. But many dynamic factors cannot be controlled. These include the weather and the actions oflocal law enforcement agencies. "
Planners can use the Installation Vulnerability Determining System as an analytic tool. It will help them identify vulnerabilities, set up training priorities, and allocate resources. IVDS was developed to help counter terrorist threats. But by exchanging terms, like demonstrators for terrorists and community for installation, IVDS can be tailored for civil disturbances. IVDS is a guide only. A low score does not necessarily mean that there is not a problem. For detailed information on the IVDS, see TC 19-16.
IVDS assesses:
•
The installation's or community's characteristics and its attractiveness as a target for terrorist acts
or civil disturbances.

•
Status oftraining.

http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/finI1... 12/28/2004
DODDOA-008769
•
Availability of communications.

•
Nonmilitary law enforcement resources.

•
Time and distance from US military installations that can lend assistance.

•
Time and distance from urban areas.

•
Geographic region.

•
Proximity to foreign borders.

•
Access to the installation or the community.

•
Population density of the installation or the community.

•
Terrain.

There are other techniques for making a threat analysis, Planners can apply a think-like-the-opposition technique and develop plans that the opposition might use. This technique can help identify vulnerabilities and how they could be exploited. Games can be used to develop scenarios to identify the threat and to plan countermeasures. Scenarios can be developed for situations involving passive resistance, blockades, violent confrontations, bombings, arson, hostages, and occupations of buildings. Although scenarios are unlikely to occur exactly as conceived, they are beneficial. They help identify potential problems that can be corrected before a disturbance becomes a reality. Command post exercises and field training exercises are useful methods for training personnel to respond to civil disturbances. CPXs can help identify high-risk targets. They also are useful in training the people who will operate the EOC. An FTX allows planners to assess response capabilities, FTXs also provide opportunities for evaluating vulnerabilities from the demonstrators' viewpoint. Ifan FTX cannot be held in the community where a disturbance may be expected, a community or an area with similar characteristics can be used. And committees or councils are another means ofevaluating threats and vulnerabilities. Such groups should include people who would playa major role in a civil disturbance operation, particularly logistics personnel and key community officials. Groups such as these ease the exchange of infonnation and make for more' effective civil disturbance planning.
When available infonnation has been collected and the vulnerability study is complete, an assessment of the threat can be made. Although some weaknesses cannot be corrected, others may only require the careful use of resources. Plans must be made to obtain resources that are not readily available, Using the identified vulnerabilities, planners categorize these weaknesses based on the specific countenneasures needed to offset them. An overview ofthe countermeasures can reveal additional weaknesses.
To be of value, threat analysis must be a continuous function. As vulnerabilities are reduced in some areas, other areas may become more vulnerable. Changes in mission, tasks, and personnel also may have an impact on the status of the current threat analysis. Failure to update a threat analysis on a regular basis or to correct or compensate for vulnerabilities can adversely affect response capabilities for civil disturbances.
INFORMATION MEEDS FOR PLANNING CIVIL DISTURBANCE
OPERATIONS

•
Goals of the groups that are likely to cause or are causing civil disturbance.

•
Times and locations of disturbances.

•
Causes of disturbances.

•
Identity of persons, groups, or organizations that have distinctly threatened to cause or are causing disturbances.

•
Estimated number of people who will be or are involved in the disturbance.

•
Likely places where crowds could assemble.

•
Presence and location of leaders and individuals who have threatened to cause a civil

http://atiam.train.army.millportallatia/adlsc/view/public/296872-1/fm/19... .htm 12/28/2004
DODDOA-008770
disturbance.
•
Group structure and types of activities group can carry out. .

•
Sources, types, and locations of arms, equipment, and supplies available to the group.

•
Possible use of sewers, storm drains, and other underground systems by participants.

•
Attitude ofgeneral populance toward groups causing civil disturbances, toward civil law enforcement authorities, and toward federal intervention.

•
Presence of threats to utilities that serve the public.

•
Kinds ofcommunications and control methods used by participants and organizers.

http://atiam.train.anny.millportallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008771
CHAPTER 5

Operations Planning
Successful civil disturbance operations depend oriadequate plans and well-trained control forces. Planning for civil disturbance operations is a continuous process. Such planning involves coordination ofpersonnel, logistics, and operational considerations. It provides for the actions to be taken before, during, and after civil disturbances. It is based on the assumption that federal military resources may be committed at any time, with or without warning, to assist local and state authorities or to enforce federal law. Such commitment may involve either limited or massive employment of forces.
COORDINATION OF CIVILIAN AND I\HLITARY EFFORTS
When federal forces are requested to help civil authorities attempting to control a disturbance, coordination with local civil authorities is a must to prevent duplication of effort. The task force commander must know what civilian resources have been and will be committed to disturbance operations.
SUGGESTED COORDINATION CONTACTS
•
CITY/COUNTY /ST A TE GOVERNMENTS

•
CITY/COUNTY/STATE LAW ENFORCEMENT AND SECURITY AGENCIES

•
IMMIGRATION AND NATURALIZATION SERVICE AND ITS BORDER PATROL

•
CAMPUS SECURITY POLICE

•
PRIVATE POLICE AND SECURITY ORGANIZATIONS

•
FIRE DEPARTMENTS

•
EMERGENCY RESCUE AND MEDICAL SERVICES

•
PUBLIC WORKS DEPARTMENTS

•
PUBLIC UTILITIES

•
PARKS AND RECREATION DEPARTMENTS

•
CITY SOCIAL SERVICES DEPARTMENTS

•
CITY ENGINEERS

•
CITY ATTORNEYS

•
CITY PUBLIC RELATIONS OFFICIALS

•
CIVIL AIR PATROL

•
CIVIL DEFENSE ORGANIZATIONS

•
INDEPENDENT SOCIAL RELIEF AGENCIES, SUCH AS THE RED CROSS AND THE SALVATION ARMY

Civil agencies and their responsibilities, organization, and authority vary considerably from community
to community. The task force commander must have an index of the various agencies, their responsibilities, lines of communication, and points of contact. Based on this index, he can plan for
liaison needs and for joint civilian and military efforts. Local authorities and National Guard troops can
supply valuaQle information. They know the area, the local agencies, and the population. Among the major areas requiring coordination are the following:
•
Preservation of law and order.

•
Custody ofoffenders.

http://atiam.train.army.mil/portal!atia!adlsc/view/public/296872-1/fmI19... .htm 12/28/2004
DODDOA-008772
•
Documentation ofevidence.

•
News releases.

•
Traffic and circulation control.

•
Exchanges of situation information.

•
Care of the injured.

•
Evacuation, housing, and feeding.

•
Protection of key areas, facilities, and personnel.

•
Delineation of areas ofresponsibility and establishment ofjoint patrols.

•
Removal ofdebris that interferes with operations.

•
Explosive ordnance support.

•
Equipment.

•
Use of facilities.

Sometimes commariders must undertake joint civilian and military efforts with agencies that provide resources under "mutual aid" agreements. Mutual aid agreements and their legal considerations vary from community to community. Some states have more detailed agreements than others. Lines of responsibility and authority between state, county, and local authorities can be confusing. Civilian command is not clear cut. State laws and local ordinances.vary widely on this point. The legal aspects of mutual aid agreements may affect the types of activities in which the agencies may become involved. Joint operational plans must be drawn up with due consideration to legal authority. Legal and jurisdictional boundaries also affect the process of controlling the disturbance, especially ifthe disturbance crosses these boundaries. Because control of a disturbance within a given jurisdiction is the responsibility of that jurisdiction, command and control of the disturbance may suddenly shift when the disturbance crosses boundaries. In some states, especially where mutual aid is not clearly defined, law enforcement personnel operating outside oftheir normal jurisdiction only have the power of citizens arrest. And the laws concerning citizens arrest also vary considerably from community to community. Early discussion ofjurisdictions with the agencies involved can reduce possible confusion and provide for a smooth transfer of control.
Whenever practical, assigned unit boundaries should coincide with local police subdivisions. This simplifies coordination of activities in the area. Boundaries usually are located along streets or alleys, with coordinating points at intersections. When a street is designated as a boundary, responsibility for both sides of the street is given to one unit to ensure proper coverage. Arrangements should be made to have troops and civil police operate together. In addition to the joint patrols and posts, arrangements should be made to exchange liaison officers at each headquarters, from company through division, on a 24-hour basis.
Flfl\DING AND MILITARY RESOURCES
Federal forces participate in civil disturbance operations as an unprogrammed-emergency requirement, and Army resources under DA control are loaned to state and local governments and law enforcement agencies as a temporary emergency measure. Therefore the costs incurred by the Army as a result of such operations are financed in accordance with AR500-50. And the policies and procedures for equipment loans, including property issued to the National Guard are delineated by AR 500-50.
Army resources are classified in three groups. Requests are considered for approval in the following order:
• Group One -Personnel, arms, ammunition, tank-automotive equipment, and aircraft. Requests for personnel to be used for direct law enforcement must be made by the state's legislature or
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008773
governor. Requests for other Group One resources can only be granted by the Secretary of the
Army or, when so designated, the Under Secretary of the Army.
•
Group Two -Riot control agents, concertina wire, and similar military equipment that is not
included in Group One. Requests for these can only be granted by the Secretary of the Army, the
Under Secretary ofthe Army, or the Director or Deputy Director ofMilitary Support in
coordination with the General Counsel of the Army. When authorized by the Secretary of the
Army, the task force commander also may approve Group Two requests.

•
Group Three -Firefighting resources, including personnel; protective equipment and other equipment not included in Group One or Two; and the use ofArmy facilities. Requests for these resources may be granted by the Secretary or Under Secretary of the Army, major Army commanders, commanding generals of CONUS armies, the MDW commander, and commanders-. in-chief of unified commands outside CONUS.

Commanders who have Group Three approval authority can approve requests for Group Three military resources, less active duty and reserve forces, to nonDOD federal agencies before or during civil disturbances. Commanders who have Group Three approval authority also can approve requests for Army resources less personnel, regardless of classification, to National Guard units in an active duty status. Loans of Army resources will be approved, if possible, when the National Guard is authorized such resources, but DA cannot provide them on a permanent basis.
LOGISTICS
Civil disturbance operations involve assets, regardless of ownership, that are special consideration of logistical needs. Logistics planning must provide for obtaining supplies, services, and facilities through local procurement. This includes food and beverages, laundry services, and sanitation facilities. When planners set up lines of supply, they should consider using nearby installations or National Guard and Reserve facilities. Logistics planners should visit the disturbance area to identify sources and to coordinate support. Authorities must identify all civil and military equipment and material available within a disturbance area to supplement military resources.
TASK FORCE SUPPLIES AND EQUIPMENT
Supplies and equipment that will accompany a unit must be ready so the unit can respond rapidly in emergencies. Supply lists must be developed with unit integrity in mind. Units must be able to operate with self-sufficiency. Among the items that must be provided for are ammunition, food, water, gasoline, lubricants, spare parts, riot control agents, maps, and administrative supplies. A running inventory must be kept and complete inspections made as necessary. Procedures must be in place for the periodic replacement of certain items. Bulk riot control agents, ammunition, food, and gasoline deteriorate in prolonged storage. Retention of unserviceable materials can have grave consequences in an emergency. Ammunition must be segregated by type. That way, if there is a late notification of weapons restrictions, nonessential ammunition can be separated before shipment.
Some equipment or supply items that the task force may need are not organic to the unit or may not be transportable by the available means of transportation. If this situation should arise, commanders must advise the chain ofcommand so that these items can be made available to the task force through special transportation arrangements, by drawing from pre-positioned stocks, or by borrowing them from units close to the objective area. For example, STANO equipment, which not all units may have, can be used to-­
• Locate and neutralize snipers.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fmlI9... 12/28/2004
DODDOA-008774
•
Secure roadblocks and checkpoints.

•
Prevent ambushes or frontal attacks by crowds.

•
Augment security patrols of isolated areas.

•
Identify friendly and hostile elements.

Individual and organizational equipment prescribed in CT A and TOE for troops and units are often not
sufficient for civil disturbance operations. Ways to obtain additional equipment must be considered when planning logistical support. For example, vehicle augmentation may be needed to meet mission requirements. Other additional equipment that may be needed includes:
•
Locally purchased or manufactured body shields.

•
Armored vehicles.

•
Riot batons.

•
Flexcuffs.

•
Riot control agent dispersers.

•
Floodlights, spotlights, and searchlights.

•
Night observation devices.

•
Communications equipment, particularly hand-held equipment.

•
Videotape and instant-developing film cameras.

•
Public address systems.

•
Heavy construction equipment.

•
Concertina wire.

•
Aircraft, especially helicopters.

•
Ambulances, first aid kits, and firefighting equipment.

•
Grappling hooks,. ladders, and rope.

•
Special weapons.

•
Generators.

•
Personal protective equipment, such as faceshields and protective vests.

Planners should consider the need for extra tents, cots, and, perhaps, tent stoves. Plans also should provide for barricade and roadblock materials and equipment needed to build, set up, and remove barricades.
Procedures must be established for resupply in the disturbance area. Logistical contact teams can be set up in the disturbance area. Contact teams must have direct communications with support units so they can get critical supplies as soon as needed. Requisition priorities must be set to ensure a fast response to resupply requests.
Suggested supplies and equipment to accompany the task force are listed in Appendix 1 to Annex D of Garden Plot. The list of supplies contained in Garden Plot is the minimum needed to support a civil disturbance operation. Commanders and other planners should not rule out other items of equipment just because they are not on this list.
ASSEMBLY AND TROOP QUARTERING AREAS
When possible, assembly and troop quartering areas should be on federal, state, or public property to reduce claims. for property damages, contract costs, and the dissatisfaction over perceiVed inequities among the populace. Reserve cen.ters and National Guard armories are ideal locations. As a general rule, assembly areas should be located away from the direct observation of disturbance crowds. This improves operations security and avoids direct harassment ofthe troops. Quartering areas are selected
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1 /fml19-1S/CHS.htm 12/2812004
DODDOA-008775
only after careful consideration ofthe physical security measures needed to protect the area and'the
troops. But assembly and quartering areas must be close enough to a disturb ante area to ensure that
troops can be committed quickly. And there must be adequate main and alternate routes between the
areas. Other factors to be considered when selecting quartering areas are:
•
Weather that is likely to be encountered.

•
Number oftroops that are likely to be using the area.

•
Length of time that the troops will be using the area.

•
Availability of sanitation facilities and recreation areas.

TASK FORCE MOVEMENT
Movement to and within disturbance areas must be considered when developing operational plans. The
means ofrnovement is critical to the success ofthe operation because of the time factor inv')lved.
Usually, troops are committed to civil disturbance missions on extremely short notice. They must arrive
promptly if the disturbance is to be contained with minimal injuries and property damage. Troops must
be moved to the objective area in a mission-ready status, while minimizing the cost to DOD and to the
military departments concerned.
Because rioters can use tactics that will delay the arrival of troops, the commander selects the most
direct routes that are least vulnerable. Close coordination with the movements officer is vital. The
commander plans reconnaissance patrols for security en route and at arrival points. The main body must be preceded by a party of sufficient strength to prevent interference with the main body's arrival. The commander also plans alternate routes and arrival points.
Coordination with transportation units must be a part of task force development. Each mode of transportation must be carefully developed during logistics planning. The final plans must be able to be executed quickly. Foot, rail, water, air, and motor movements all offer certain advantages and disadvantages. Some modes require more coordination and earlier preparation than others. Rail movements usually involve the use of special trains, the selection of entraining and detraining points, and the calculation ofdeparture and arrival schedules. Coordination with railroad officials, therefore, is an important planning step. When selecting air travel, task force planners must detennine the characteristics of available aircraft to facilitate proper loading. In motor moves, provisions must be made for supplies ofgasoline and repair parts. When forces are to be airlifted into a disturbance area, planning must include provisions for sufficient ground transportation and communications equipment in the disturbance area.
Planners must also consider transportation for use within the disturbance area. They consider the use of commercial buses and rental cars. The buses could be used for mass transportation in the disturbance area. Unit vehicles can be augmented with additional vehicles to provide sufficient flexibility and mobility for operational and support elements and mobile cordons. Helicopters and fixed wing aircraft also should be included in transport planning for use within a disturbance area. Whenever possible, helicopters are employed to provide command and control, surveillance, medical evacuation, troop lift, and supply lift capabilities. Planning also must address the selection of landing zones and the use of air traffic control measures in the disturbance area.
All units with civil disturbance missions must maintain qualified personnel for preparing load plans and certifying special handling data fonns. Load plans must be developed for each mode of transportation. Personnel and equipment load plans must be based on unit integrity to ensure that the control force arrives in the disturbance area prepared for immediate employment. Except for limitations in handling
http://atiam.train.army.mil/portallatia/adlsc/view/public/296872-I/ftnI1... ~ __ J2_/2_8/2_0_0_4 ______
DODDOA-008776
hazardous equipment, each element ofthe force should take its required equipment and a small reserve ofammunition, riot control agents, and basic supplies. Load plans must be rehearsed and made a part of unit SOPs.
COMl\'lLJNICATJONS
Civil disturbance operations require adequate and versatile communications equipment. Communications must be maintained at the disturbance scene and between,the scene and the operations headquarters. Planners must consider using every means of communication available, including:
•
Telephones.

•
Hand-carried and vehicle-mounted public address systems.

•
Commercial radio and television stations .

•
, Teletype machines.

•
Taxicab radio nets.

•
Military and civilian police radios.

Civilian communications systems should be used as much as possible, but they must be supported by an independent military system. And the military system must be able to sustain all essential communications. Ifmilitary equipment is not compatible with the ,civilian equipment, plans must be made to collocate stations, exchange equipment, allocate frequencies, or set up net radio interface/phone patches. (Net radio interface stations connect mobile radios to switching systems. From there, the routing goes to telephone subscribers.) Signal security measures, including authentication systems, are used during disturbance operations. Radio operators working close to rioters use headsets to receive messages and a low voice to send messages to keep rioters from hearing the messages. And troops must know emergency procedures for clearing the radio nets.
Public address systems are useful in issuing proclamations and psychological pronouncements or persuasions. They can drown out vocal demonstrations. They help prevent vocal communications between crowd leaders and crowd members. And they can be used by commanders to direct and control troops. Control force leaders wearing protective masks can use megaphones with battery-operated loudspeakers to convey instructions to troops.
Visual signals also can be useful. Flares can signal the beginning and ending ofoperational phases. Hand and ann signals and messengers also can be used.

RELIEF
Civil disturbance operations are demanding, both mentally and physically. Troops need relief if efficiency and disciplin~ are to be maintained. During civil disturbance operations, units assigned an area control mission may be totally committed, preventing relief operations within the unit. Relief must be provided by a higher echelon retaining uncommitted units. Ready reserve forces should not be used for reIiefbecause they may become actively involved in operations. Relief must be accomplished in place to ensure that the relieving unit physically occupies assigned facilities and the area ofoperation. Relief during civil disturbance operations must be conducted during the least critical times. Relief priorities must be set to ensure that forces employed at the most vulnerable facilities and in the most riot-prone areas are relieved first. The relief units may have more or fewer troops than the units being relieved, depending on the situation.
Relief operations must be coordinated with civil ,police, fire departments, and other agencies operating in
hnp:llatiam.train.army.mil/portal/atiaiadlsc/view/public/296872-lIfm119-15/CH5.htm 12/2812004
DODDOA-008777
the disturbance area. Civilian relief operations must be conducted in such a way that they do not conflict with military relief operations. Any time that unit capabilities or the task force commander change, the incoming commander reviews the joint control and support agreements. If it is necessary, he coordinates new agreements. This action helps ensure available resources are used in the most effective manner possible.
Commanders at each echelon should be present at the field CP of the outgoing unit to facilitate
command and control. The commander of the outgoing unit directs the relief procedures. He usually remains responsible for the area ofoperations until most of the relieving unit is in position and communications and control have been established by the incoming commander. The exchange of responsibility is agreed upon by the commanders concerned and is verified by the concurrence of the next higher commander. If riotous activity occurs before the incoming commander assumes responsibility, he assists the outgoing commander with all means available.
Commanders at each level must conduct a thorough reconnaissance of their operational areas. All unit leaders must receive a complete briefing from the outgoing unit. Routes into the areas must be reconnoitered. Critical facilities, barricades and roadblocks, patrol routes, and other items of operational importance must be identified. And unit leaders must familiarize themselves with their assigned area and establish a rapport with the law-abiding citizens in the area.
. .
Commanders ofthe incoming and out-going units must arrange for the exchange of special equipment items essential to the mission that may be in short supply. Vehicles and radios may be exchanged because the need for them in civil disturbance operations usually exceeds the TOE issue authority. Other items, such as barricade and roadblock material, wirelines, switchboards, extra ammunition, and riot control agent munitions, can be left with the relief unit. Equipment exchanges are based on the authority included in the relief order of the next higher commander. Equipment exchange must be made using proper accountability procedures.
KEY ELEMENTS OF A RELIEF ORDER
•
Time of the relief to begin and end.

•
The time or the condition for exchanging responsibility for the operational area.

•
Routes to be used by the incoming and outgoing units.

•
Civil authorities who are operating in the area.

•
Locations of critical facilities and barricades and roadblocks.

•
Patrol routes, guard posts, and other security measures that are in place.

•
Any requirements for periodic reports by subordinate leaders during the relief effort.

ADMINISTRATION
Plans and administrative procedures must be developed to handle personnel actions resulting from the commitment of forces to civil disturbance duty. Personnel plans must provide for care ofdependents and personal property left at home station, indebtedness, emergency leave, sickness, and injury. To ensure personnel matters are properly handled in the disturbance area, members of unit personnel sections must accompany.the task force.
DISCIPLINE, LAW, AND ORDER
Directives must be published that clearly set the standards of conduct and appearance expected of the
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-I/fm/19... 1212812004
DODDOA-008778
troops in the perfonnance oftheir missions. Troop relationships with, and attitudes toward, civilians
must be stressed. The provost marshal can provide helpful advice on matters ofdiscipline, law, and
order. Troops must refrain from acts that could be damaging to the high standards ofpersonal conduct
and discipline of the Anny.
Appearance and discipline offederal forces have a psychological impact on the populace and facilitate
mission accomplishment. Leaders must ensure that subordinates are clean, well-groomed, neat, and
conduct themselves in the highest standards ofmilitary courtesy and discipline. The importance ofstrict
adherence to prescribed standards ofconduct andfair treatment ofcivilians must be stressed
continuously.
MORALE AND WELFARE
Morale and welfare are areas ofparticular concern in civil disturbance planning because ofthe
restrictions and demands imposed on the troops. Because control forces must perfonn very sensitive
duties under great physical and mental stress, the following services are extremely important:
•
Rest and recreational facilities, such as free movies, special service activities, TVs in barracks,
and athletic equipment and facilities.

•
Assistance to dependents and access to American Red Cross and Anny Emergency Relief
services.

•
Post exchange facilities, including barber shop and laundry facilities.

•
Financial services and access to a bank.

•
Medical and dental services.

•
Postal services.

•
Leave and passes.

•
Religious services.

•
Legal assistance.

•
Decorations and awards.

These services are necessary to maintain high morale and to allow soldiers to concentrate on the complex, sensitive, and stressful tasks that they must perfonn during civil disturbance operations.
MEDICAL SERVICES
Emergency medical attention must be available for military and civilians. Medical support for civilians, however, should be provided by civilian medical facilities. Military facilities should be used by civilians only to prevent undue suffering or loss oflife or limb. Plans must provide for qualified medical personnel, air and ground ambulance service, medical facilities, medical supplies, medical evacuations, and casualty reporting. Casualty notification procedures are prescribed in AR 600-] O. Factors to consider for medical facilities include location, sources ofpower and water, and sanitation facilities. Existing medical facilities, military and civilian, can be used whenever practical.
MEDIA RELATIONS
Whenever federal forces are committed to a disorder, media interest is generated. In a disturbance area the public is directly affected by actions taken individually and collectively by military personnel. Similarly, the public outside the area has an intense interest in events taking place within the area. Press interest in most cases will be high. Unless timely, accurate infonnation is furnished, the press will be forced to rely on speculation and rumor.
http://atiam.train.army.millportallatia/adlsc/view/public/296872-1/fm119... 12/28/2004 __
DODDOA-008779
Soldier responsibilities with regard to media contact must be made clear. Soldiers must be informed that they must treat media members with courtesy and respect. They also must be cautioned not to make any comments concerning upcoming or active civil disturbances and unit missions, even iftold their remarks will be "offthe record." Soldiers, when approached, refer media members to superiors or the P A O.
The task force commander must anticipate media contact. Plans must include the clearance of all news releases with the Assistant Secretary of Defense for Public Affairs, the on-site public affairs chief, or a higher authority, whichever is appropriate. Procedures must be established for confiscating film and videotape ofprohibited areas. Both the P AO and the SJA must review the procedures to ensure that the ability ofthe media to gather and report news is not unduly restricted. To help maintain media relations, plans also must include:
•
Procedures for furnishing accredited media members with press passes to facilitate their passage
through police lines and military checkpoints. News media members must be allowed freedom of
movement as long as they do not interfere with control force operations.

•
SOPs for coordinating press requests to cover operations in the disturbance area, including
furnishing military escorts.

•
Establishment of a newsroom by the task force P AO. The newsroom can be used for periodic
press briefings and for furnishing the media with fact sheets and other background data
concerning the operation.

•
Regular news conferences and periodic briefings. They should beheld by senior civilian and
military officials who can provide timely, accurate information and the opportunity for the media
to question senior commanders. When it is practical, the task force commander should consider
allowing the media to accompany senior officials on tours ofthe affected area.

•
Making news rel~ases concerning civil disturbance operations and instructions for public
cooperation. These releases must comply with AR 360:-5.

•
Liaison and coordination with local civilian public affairs officials and information agencies. This
simplifies the exchange ofinfonnation, ensures the infonnation's accuracy, and generally aids the
news-gathering effort.

•
Setting up a rumor control center. A rumor control center helps reduce the adverse effects of
misinfonnation.

DA public affairs policy is to provide the public, through cooperation with the news media, prompt, responsive, and accurate infonnation. Emphasis must be placed on the fact that the Secretary ofthe Army has been assigned a mission, assisted by DOD components, to help civil authorities in restoring and/or maintaining law and order. It also must be pointed out that the mission will be accomplished using the minimum force needed. Maximum disclosure ofaccurate information on the situation in the disturbance area with minimum delay is the governing principle, subject only to security and operational needs. Annex F of Garden Plot provides the commander with guidance on the responsibilities for disseminating public information. Annex F also provides guidance that can aid in planning for personnel and equipment to conduct infonnation activities in the disturbance area.
Appropriate operating procedures and command guidance must be issued in writing to prevent the release of information potentially harmful to the military mission. Members of the news media must be clearly infonned of the location ofprohibited areas that may not be photographed or Videotaped and restricted areas where they must have a proper escort. If soldiers must detain or apprehend members of the media for entering restricted areas without proper authorization or for trying to film or videotape prohibited areas, the soldiers notify their leaders immediately. Operating procedures should include the locations ofnewsrooms and the access control procedures for restricted areas. In most instances, the media will not be furnished communications or transportation, nor will a press center be set up in the disturbance area. But a newsroom should be set up. The media should be afforded the use oftables,
http://atiam.train.army.millportal/atia/adlsdview/publicl296872-lIfm119-... 12/28/2004
.-"-----------------~­
DODDOA-008780
chairs, typewriters, and other equipment associated with a newsroom operation when this use dO'es not interfere with control force operations. If the military is the only source capable ofproviding communications and transportation support, such support will be provided, ifpossible. However, prior arrangements must be made for reimbursement.
PLANS AND REIORTS
Detailed plans for civil disturbance operations at each level of command implement the plans ofthe next higher echelon. Contingency plans are prepared based on a reconnaissance of the disturbance area and a comprehensive review of after-action reports of similar operations. Each plan shows an assembly area, routes and alternate routes to the assembly area, tentative locations of roadblocks and OPs, and . temporary facilities for billeting, feeding, and detention. Maps, overlays, aerial photographs, and sketches of the area should be obtained. Plans for distribution and reserve stockpiling are developed. Usually, contingency plans are not implemented exactly as written. Their value is not in rigid ~ application, but as a firm base from which to mount flexible tactics in response to developing situations.
Operational plans provide for the main tasks to be accomplished in controlling a civil disturbance. The plans include:
•
A plan to isolate the affected area.

•
A patrol plan.

•
Plans for crowd control.

•
Plans for the neutralization of special threats and for rescue operations.

•
Plans for deployment.

•
Plans for withdrawing after order is restored.

•
Plans for medical care and for evacuation operations.

•
A security plan for priority facilities that are vulnerable to dissident activity, that are critical to the community's wellbeing, and that have value to the dissidents.

Operations plans must also provide for establishing and maintaining command posts. Locations for the EOC and tactical command posts should be selected in advance. Collocation ofcommand posts and establishment ofjoint operations centers facilitate liaison and coordination between military and civil authorities. Plans must be made for staffing and equipping the CPs with a minimum ofdelay.
The EOC must have security. Key personnel can become targets for terrorists. An alternate EOC, and people to staff it, also must be considered. The prirriary EOC could be overrun by the disturbance. The need for an alternate EOC can be determined by threat analysis. If an alternate EOC is needed, procedures for evacuating the primary EOC or for passing command and control must be in place.
The EOe must have extensive radio and wire communications. Sufficient phone lines must be installed to facilitate coordination and information dissemination with outside agencies and operational forces. If a particular agency must be able to communicate without delays, some lines may have to be dedicated. And the Eoe must have sufficient radio equipment to monitor all civilian and military operational frequencies. The Eoe also must have space for indiv
http://atiam.train.army.mil/portal!atia!adlsclview/publicl296872-1/finIl... .htm 12/28/2004
DODDOA-008781
CHAPTER 6

Control Foree Operations
To restore order in a civil disturbance, a control force mu.st isolate the disturbance area to prevent the disturbance from spreading. Itmust protect the people, facilities, and services likely to become targets of attacks in a continuing disturbance. It must exert control over the disobedient crowds. It must establish control of the disturbance area. And it must neutralize any special threats that arise.
Federal forces can expect to do one, some, all, or any part ofthese operational tasks. Which operational tasks they perform and to what extent depends on the kind ofdisturbance and the reason for federal intervention.
ISOLATE THE AREA
The initial task in controlling a disturbance is to isolate the people creating the disturbance from those who have not yet become actively involved. Once a crowd is isolated, time is on the side of the commander. The first action is to identify the area and the people to be isolated. The second is to seal off the disturbance area. The objectives ofthe task are to-­
•
Prevent disorder from spreading to unaffected areas.

•
Move uninvolved people from the area quickly.

•
Prevent unauthorized people from entering the affected area.

•
Prevent the escape of people who are Qent on expanding the disturbance.

Every effort must be made to allow a crowd to leave an area peacefully. This reduces the number of people who may have to be apprehended or dispersed.
Useful measures for isolating an area include barriers, patrols, pass and ID systems, and control of public utilities. Some measures may be in place before the disturbance. Civil authorities usually have a means to control public utilities. Street lights, gas, electric, water, and telephone service must be able to be turned on or off to support control force tactics. Passage into and out of the isolated area must be controlled. Persons connected with the disturbance should not be able to move into or out of the area. But emergency medical personnel, public work crews, media members, and others may need to enter or leave the disturbance area. And persons residing within a disturbance area may need to travel to and from work. Installation and/or municipal contingency plans usually include a pass and ID system to allow authorized personnel into and out of restricted areas. To be effective, a pass and ID system must be carefully planned in detail before it is needed.
Barriers like barricades and roadblocks can be used to stop the passage ofpeople and vehicles to and from an area. Or they may be constructed to permit specific people and vehicles to pass. Often it is impractical to seal off an area due to physical and geographical limitations. College campuses and suburban areas, for example, often have woods and open fields that make them difficult to seal off.
Temporary barriers of troops can be set use of up until more permanent barriers can be made. When a troop perimeter is used to isolate an area, the control force sets up an inner and an outer perimeter. The inner perimeter contains the area of the disturbance and keeps the disorder from spreading. Troops on the inner perimeter face the disturbance. The outer perimeter prevents outsiders from entering the disturbance area. Outer perimeter troops face away from the disturbance. The two perimeters protects
http://atiam.train.army.miVportal/atia/adlsc/view/public/296872-1/fm/19-... 12/28/2004
DODDOA-008782

FM 19-15 Chptr 6 Control Force Operations
the backs ofthe troops in each line; The use oftwo perimeters also creates a clear zone in which to stop people who breach one of the lines. In large crowds control force stand shoulder-to-shoulder. In small crowds they stand double arm's length apart. If a closed perimeter is needed, they can link themselves
together with riot batons.

WIDE-INTERVAL TROOP PERIMETER
_--..!....f1?I.r----­
12/2812004
http://atiam.train.army.miliportal/atiaiadlsc/view/public/296872-lIfm119...
DODDOA-008783

Portable barricades of sawhorses, ropes, and other field-expedient devices can be used to impede pedestrian traffic. Concertina wire is a suitable material for rapidly constructed, effective barricades. But concertina wire is used only under the most serious circumstances. And then it is used sparingly, because it is indicative of violent disorders.
CONSTRUCTION OF A PORTA8LE BARRICADE
! @"DI"STANOAItOCONCERTINA
IS ItEQU'"EOI rOPVIEw
tiOOK& FDA SEoCUIIING .

_-...,....,..-UppEA COIL
NOTE.: POI,.T OF ..nAC"M~NT

"LL ""AMi M£U.£1I5 FOR HOOI( ""'0
FYF

ARE 2-X." --, • ----i
AUoJOIN'lS ..liE ' ~ \' ......ETED AND " I~'
MOLTtD I' , \'
I ,HINGE I ~
, !HEAVY DU"I .
t+,..............'If:i~;;;:::=~~ :~~~N~•. -=:--i­
", ~ lit 1:.
\ ,; ! '( t I H-"-.-~=-H-"-==--.-'-HI \/. / ~ :j f~
I " ,,~ ~ J
-' "--;:2-I"DIIIITOFATTACHJ.~ --.. _.J.
mR IIOOK ,""D rtf ENO YIEW aiDE VIEW CDM ..L!T~D I'OAUILf ••"II"IC.IoOI:' IN CLOIIED fRAMIi 12 RtOullHDI
r37
1'0$11ION SI+OWING "IACIMINT OF COILS AHO POUlTS or ~TT.aCHMIENT OF FIII6T LOOPS. LOWEll COILS TO '''O'''T OF FRAME
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008784

EMPLOYMENT OF A PORTABLE BARRICADE
-.....
I • 50' MA)(IMUM-----.....I
FENCE. OPEN PDsmON. UNHOOKED
Wir_ fal'_" • ...,.,., COIl to 10_,cDil5 -'on" fullll!nllth ...c_pt """~n 3' 10" of alth", _"d,

TROOPS • ... .... P' p0-P' ~ ~ SOLID aLOCK CONSTRUCTION ROAD SIDEWAlK WARNING SIGN .....p.nited from ~nlll' ~ .tt.nd wire ............-­?S· TO 100' -_____­........... SIDEWALK SOLID 8l0CK CONSTRUCTION 0

Roadblocks that cannot be easily breached by vehicles require large and heavy construction materials. Barrier materials are loaded on staged trucks for rapid emplacement. A quickly-erected barrier can be made by parking vehicles bumper-to-bumper. However, the vehicles may be damaged by a hostile crowd. A vehicle-mounted barricade is useful both as a barricade and as part of a formation. It can be made locally by fitting a wire-covered wood or metal frame on the bumper of a vehicle. More permanent roadblocks can be made from 55-gallon drums filled with water or earth. Sandbags, earthworks, and trees can also be used to block roads. Several roadblocks placed at intervals of 25 to 50 feet will usually prevent breaches by heavy or high-speed vehicles. If small arms fire is likely, barricades and roadblocks must provide cover. Approaches to the position must be illuminated without silhouetting the people manning it. Auxiliary lighting may include hand-carried lights, vehicle-mounted searchlights, spotlights,
floodlights, flashlights, and vehicle headlights. Canvas or sandbags should cover materials that could chip or shatter when hit by thrown objects. And signs must be placed in front of the position to warn unauthorized personnel not to approach.
Perimeter patrols are useful to prevent entry to and exit from the disturbance area of people or groups trying to bypass barricades and roadblocks. These patrols operate along the outer operational boundary of the disturbance area. Their routes can be integrated with patrol routes within the disturbance area.
PROTECT LIKELY TARGETS
In most civil disturbances, civil police enforce the laws in the disturbance area, and military forces protect likely targets. Key buildings, utilities, and services critical to the functioning of a community must be protected. Also, key people and VIPs can be targets for crowds angered by official policy.
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fml19... 12128/2=0'-"-04-'---_
DODDOA-008785
VIPs may be at risk in public, at work, or at home. Off-duty control force members may be targets if they are recognized by demonstrators with whom they have been in conflict. Control force members on patrols too small to defend themselves against a violent crowd also may be in danger.
Armories, arsenals, hardware and sporting goods stores, pawnshops, gunsmiths, construction sites, outlets for chemical products, and other places where weapons or ammunition are stored must be protected. To conserve manpower, the control force may move dangerous items to a central facility. Facilities that could be symbolic targets for radicals must also be identified and protected when possible. Likely targets for such attacks are control force CPs, billeting areas, and motor parks.
Priorities for providing physical security must be established. Effort and manpower must be placed where they will do the most good. When setting priorities for the protection of facilities, for example, consideration is given to the facility's importance to the well-being of the community or the installation. The loss of water and electric utilities endangers the health of the community. The loss of r;overnment buildings disrupts government functions. Radio and TV stations, if seized by demonstrators, can be a powerful tool for spreading disorder. A facility's susceptibility to damage or loss must be considered. The degree of risk to a facility is based on its physical layout, its type ofconstruction, and its existing protecti ve measures. When developing priorities for protection, the intent and ability of the crowd is always a factor to be considered. Planners must analyze the destructive intent and the capabilities of the participants. This analysis will help identify both likely targets and the degree ofviolence likely to occur.
The military must anticipate the need for the rapid implementation ofphysical security measures. (Detailed information on physical security measures and procedures is found in FM 19-30.) Perimeter barriers, protective lighting, alarm systems, and intrusion detection devices help deter and detect. intruders. These preventive measures impede unauthorized access to a facility. Measures ofthis type mayor may not be in effect at the time of the disturbance. Troops also can be used to implement security measures. Troops used as sentinels or walking guards and at checkpoints must be committed jointly with guards from the facility being protected. Existing guard forces can be augmented with additional equipment. Fixed security posts must be manned by enough guards to be effective and to protect themselves until relieved. And troops can be used as a highly mobile response force, centrally located near likely targets. A mobile response force reduces the need for fixed security, freeing troops for other operational tasks.
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fm/I9... 12/28/2004
DODDOA-008786
MEASURES TO PROTECT UKElY TARGETS
VIP • Restrict relea..of personal data. • Do not identify parking sreas; identify p.Tking spaces by number. • Urge key pefsonne' and VIPs to keep a low profile. 88rief ,personne' on their environment and ,epore any suspected sunemance by strangers. -Use duress ~ode$ co alert othars of poaible threat. • LimiUcC8IUodata on.&inerari., and trawl ar ... ng.m.n~ to al few people •• possible.
CONTROL FORCE • Use at least squad-si28 patrols whel'l elltensive .00tin9 or group violence is occurring. .Prohibit off-duty control forco members from the disturbance area. • Brief personnel on procedur., to follow when ambushed.
BUILDINGS • Prevent directacc:ess by public to EOe, CPs. and staging and billeting aleas. • Equip visiCor entrances with duress alarms. • Escort v;sitors; control access to sensitive and command areas. -SeiKt an int81ior .afe room for senlUive facilities in case they are iIlttacked. • Store supplies for extended operattonl and emergencies. inclUding first ,id equipment, bomb blankets. food. candles. and lanterns.
• Control entrances to sensitive sreas; patrol locked entrances periodically.

EXERT CONTROL
The measures used to exert control in a disturbance affects the crowd's behavior. Each crowd is unique. The makeup of a crowd can vary during the disturbance. Control force measures must be geared to each crowd's size, temperament, cooperativeness, and degree of organization and unifonnity. Measures should change as the crowd's characteristics change. Even a change ofone characteristic can drastically alter a crowd's response to control force measures. Large crowds may be easy to control if they are
organized, cooperative, and nonviolent. Nonviolent crowds are often easy to control with a very limited
show of force. Small crowds can be hard to control ifthey are organized, uncooperative, and violent.
To control a cooperative crowd, a control force may only have to direct traffic, provide infonnation, and
control isolated criminal acts like theft and vandalism. A cooperative crowd may even have its own
security force, which can provide liaison and assist the control force. But uncooperative crowds do not have to be violent to evade control. They can passively resist attempts to disperse them. They can fonn human blockades, occupy buildings, or chain themselves to objects to force arrests and bodily removal.
Crowd size has a direct impact on the selection and use of crowd control measures. Small crowds can be very mobile. They are easily dispersed, but they can quickly re-fonn elsewhere. Because of this, crowd control fonnations are seldom effective against small crowds. Large crowds are less mobile. Because they are easier to contact, most crowd control fonnations are effective against them.
A control force can disperse a disorganized crowd more easily than an organized crowd. A disorganized crowd lacks the leadership that gives a crowd direction. If violence has not broken out, a proclamation
http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/frn!1... 12/28/2004
DODDOA-008787
and an organized show of force may be enough to disperse a disorganized crowd. But organized crowds have leaders to give the crowd direction. Leaders can plan actions to frustrate or counteract control force plans and tactics. They may use small groups, operating independently of the main crowd, to divert or fragment the control force.
A generally uniform crowd having a common cause and belief in their actions may respond to control
attempts in a predictable manner. The response of a varied crowd is harder to predict. A varied crowd often has conflicts between factions within the crowd. These conflicts can lead to heated arguments and,
eventually, to violence. A control force is open to charges of favoritism ifit appears that they do not treat all factions evenhande~ly. The control force must balance its responses to the actions of the various
factions. They must be careful not to show favoritism toward anyone faction.
The military control force uses carefully selected tactics and wisely committed resources to exert control over disobedient crowds. The task force commander chooses the control measures most useful for controlling a particular crowd. The variables that influence his choice include:
•
Intensity level of the disturbance.

•
Public opinion.

•
Current policies.

•
Crowd mood, intent, composition, and activity.

•
Capabilities and readiness of control forces.

•
Immediate and long-range benefits of control force action.

•
Weather, terrain, and time of day.

In general, the commander has four options available to him. He can monitor, disperse, contain, or block the crowd. These crowd control options are often used in combination. He chooses his options based on his evaluation of the particular crowd. He selects any combination of control techniques and force options he thinks will influence the particular situation. He must always try to choose the response that can be expected to reduce the intensity of the situation. (Control techniques and force options not fully discussed below are detailed in separate chapters later in the manual.)
MONITORING
The commander may task control force teams to monitor crowd activity and note developments. The monitoring done 'by these observation teams enables the commander to gage the crowd's activity and intent in relation to the overall disturbance. It also may allow him to influence the crowd by persuasion. Monitoring is employed throughout crowd control operations. Monitoring is appropriate when more decisive action is not feasible due to crowd size or when the intensity of a situation might escalate. It is particularly useful in large, nonviolent demonstrations. Monitoring can serve as an interim measure until more control forces arrive. Monitoring includes establishing communications with crowd leaders to convey official interest and intent to the crowd. It also includes efforts to gain the cooperation of crowd leaders.
Observation teams monitor a crowd's activities to gather information. They observe and report on crowd size, location, mood, and on the developing situation. An observation team may consist of a marksman, a radio operator, and an observer equipped with binoculars. They may be posted on strategic rooftops and other high terrain that overlooks the crowd. Sometimes observers use helicopter-mounted observation devices. This also affords security for the control force. The control force must know where observation teams are located so they do not mistake the teams for snipers.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/finI1... _ 12/28/2004
DODDOA-008788
Comniunications with crowd leaders and participants can help a commander to control a situation without need for more severe measures. Ifcommunications exist with crowd leaders, the authorities may be able to divert either the leaders or the crowd from their stated or apparent goal. Pressure can be put on the leaders to channel the crowd into an area that minimizes disruption to the community and aids control force operations. March routes and demonstration areas can be limited to those that will help contain the crowd and reduce their potential for di~rupting $e community. Pressure can be positive, like offering concessions, or negative, through the use ofdeterrents.
If the control force can gain the cooperation of crowd leaders, it can decrease the crowd's potential for disorder. Ifcrowd leaders seek cooperation from authorities, officials shou
http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-1/fin/1... 12/28/2004 .
--~­
..... --­
DODDOA-008789
CHAPTER 7

Force Options
The task force commander's mission is to. help resto.re law and o.rder. In canying"o.ut this missio.n;the task fo.rce co.mmander ensures that o.nly minimum fo.rce is used. In selecting an o.peratio.nal approach to. a civil disturbance situatio.n, the co.mmander and his staff must adhere scrupulo.usly to. the "minimum necessary fo.rce" principle. Fo.r example, crowd co.ntro.l fo.rmatio.ns Dr rio.t co.ntro.l agents must no.t be used if saturatio.n o.f an area with tro.o.ps will suffice. The presence o.f large numbers o.f tro.o.ps can prevent the develo.pment o.f situatio.ns in which the use o.f deadly fo.rce is necessary. A large reserve o.f" tro.o.ps sho.uld be maintained during civil disturbance o.peratio.ns. Kno.wing that a large reserve fo.rce is available builds mo.rale within the co.ntro.l fo.rce and helps prevent them fro.m o.verreacting to. provo.cative acts by diso.rderly perso.ns. Any do.ubts abo.ut the number o.ftro.o.ps required usually sho.uld be res Dived in favo.r o.f large numbers.
Every effo.rt is made to. avo.id appearing as an invading fo.rce. The co.mmander has many tro.o.ps at his dispo.sal. But he co.mmits them o.nly when and in the numbers necessary. When he do.es co.mmit tro.o.ps, " he ensures that they functio.n in a highly o.rganized and disciplined manner. The co.ntro.l fo.rce must present the image o.f a restrained and well-disciplined fo.rce who.se so.le purpo.se is to. assist in resto.ring law and o.rder with a minimum lo.ss o.f life and property and with due respect fo.r tho.se citizens who.se invo.lvement may be purely accidental. While co.ntro.l fo.rce perso.nnel must be visible, their tactics Dr fo.rce co.ncentratio.ns sho.uld be tho.se that will calm rather than tho.se that may excite.
All troo.ps, befo.re taking part in civil disturbance o.peratio.ns, must be briefed o.n-­
•
The backgro.und o.fthe situatio.n and the specific missio.n o.fthe unit.

•
Rules go.verning the applicatio.n o.f fo.rce as they apply to. the specific s"ituatio.n.

•
The psycho.lo.gical aspects o.fthe lo.cal situatio.n, specifically addressing types o.f abuse that the
tro.o.ps can expect to. receive aild the proper respo.nses to. that abuse.

•
Identificatio.n to. be used by news media representatives and civil o.fficlals, ifkno.wn.

•
The special o.rders co.ntained o.n GTA 21-2-7.

When the tro.o.ps arrive at the disturbance area, they must kno.w and understand o.peratio.nal restrictio.ns and the permissible degrees o.ffo.rce. They must have a written co.py o.fthe special o.rders. All tro.o.ps must understand and co.mply with the special o.rders.
The intent o.f the special o.rders is to. achieve a balance in the use o.f fo.rce and thereby avo.id indiscriminate firing in civil disturbance situatio.ns while pro.tecting the so.ldier's right o.f self-defense. These special o.rders can be supplemented by additio.nal written o.rders fo.r special Po.sts, po.sitio.ns, Dr o.peratio.ns. Such o.rders must be as simple and brief as po.ssible.
Each unit co.mmander must ensure that his tro.o.ps have all the perso.nal protective equipment needed fo.r civil disturbance o.peratio.ns. Civil disturbance equipment is no.t sto.ckpiled Dr issued in quantity. It is requested Dr acquired when it is"needed. Generally, each so.ldier's equipment co.nsists o.fthe battle dress unifo.rm, a helmet, a faceshield, a flak Dr protective vest, a pisto.l belt, a first-aid kit, a canteen, a pro.tective mask, leather glo.ves, and a bo.dy shield (2 112 feet x 4 112 feet). Protective vests are required when vio.lence is expected. The vest protects the vital o.rgans in the to.rso.. On the other hand, protective vests are heavy and cumberso.me. In very ho.t weather, they may increase the risk o.fheat injuries. There is a trade-o.ffbetween pro.tectio.n and a lo.ss o.f effectiveness, mo.bility, and visibility caused by the
http://atiam.train.army.mil/po.rtal/atiaiadlsc/view/public/296872-lIfm11... ~__ _12_/2_8{2~Q!_ _ _
DODDOA·008790

equipment.
The helmet and the faceshield protect the head and face. Protective masks are vital items when CS agents and/or smoke are present during a civil disturbance. The soldiers must know how to use the mask in stressful situations. The masks, especially when worn with the hood, can increase the risk of heat casualties. They limit the amount of strenuous activity that soldiers can perform. Proper training is the best way to reduce the disadvantages of wearing the protective mask. The protective mask carrier is worn in the front to give added protection to the groin area.
The black leather gloves with inserts protect the hands. However, soldiers using equipment or weapons may not need the protection of the gloves. They may need flexibility more than protection.
Body shields provide protection that complements the protective vest. They may replace the flak vest altogether. Body shield~ are very effective protection against thrown objects. When pushing back a crowd, body shields deny demonstrators something to grab. When body shields are used in groups or formations, they provide a protective wall for rescue forces and have strong psychological effects on the crowd. The Army does not stock body shields. However, they may be purchased locally from police equipment manufacturers or distributors. Body shields also may be constructed locally using aluminum sheets. In any case, they must be sturdy and lightweight. They must cover the body's width from the chin to the knees. Ifthe resources are available, viewing slits can be cut in the shields approximately 6 inches from the top.

USE OF BODY SHIELDS IN A CROWD CONTROL FORMATION
Hand irons are needed for apprehensions. The use of hand irons requires special training to avoid damaging the detainee's wrists and to ensure their efficient use. Hand irons require a key to double-lock and to open them. A good alternative to hand irons are flexcuffs. Flexcuffs require minimum training. One soldier can carry several without hindering his mobility. Flexcuffs require no equipment for applying them. But they require wire cutters to take them off and to clip off the tail end after application.
Riot control agents have many advantages over other measures. They have an immediate effect on large groups ofpeople without causing permanent harm. Riot control agents, when properly used, disperse large crowds without troops having to come into contact with the crowds. The troops must understand the capabilities and limitations ofriot control agents in order to use them in the safest and most efficient manner. Only the task force commander has the authority to order the use ofriot control agents. Based on the situation, he may delegate this authority to qualified personnel.
People do not easily develop a tolerance to riot control agents. But experience and knowledge tend to reduce the fear that gives the control force an added psychological advantage. Riot control agents lose some of their advantages in crowd control as they are more widely used and understood.
http://atiam.train.army.miliportaliatiaiadlsc/view/public/296872-1/fm/I9... 12/28/2004
DODDOA-008791
Short of masking, there are no effective defensive measures against a well-planned and executed riot control agent deployment. Surplus masks and other types ofmasks are available to the public. Troops can expect masks to be used by highly motivated members of the crowd. Therefore,riot control agents are not a cure-all. They are a tool that must be used in conjunction with well-trained and well-equipped troops.
The commander may elect to arm his troops with riot batons, shotguns, or rifles. But his choice will always be consistent with the principle of using only the minimum force needed to accomplish the mission.
The task force commander is authorized to issue live ammunition to troops under his command. But he must ensure positive control over the loading and the firing of weapons. Guidance concerning placing magazines in weapons must be specified when the ammunition is issued. Individual soldiers must be instructed, however, that they may not place a round in the chamber unless authorized by an officer or, if they are not under the direct control and supervision of an officer, unless circumstances justify the use of deadly force. Retention ofcontrol over the loading of weapons by an officer until the need for such action is clearly established is of critical importance in preventing the unjustified use of deadly force. Whenever possible, command and control arrangements must be specifically designed to facilitate careful control ofdeadly weapons. Planners must realize that if a participant in the disturbance seizes a loaded weapon from a control force member, the potential for esc~lated violence ~ill increase greatly.
The presence of loaded weapons in tense situations may invite the use of deadly force in response to provocations that, while subject to censure, are not sufficient to justify its use. It also increases the hazard that an improper discharge of a weapon by one or more soldiers will lead others to fire reflexively on the mistaken assumption that an order to fire has been given. Officers must be clearly instructed that they have a personal obligation to withhold pennission for loading until circumstances indicate that deadly force will very likely be necessary and justified. Strong command supervision ensures that the loading of weapons is not authorized in a routine, premature, or blanket manner;
Task force commanders must exercise positive control over the use of weapons at all times. Each soldier must be instructed that he may not fire his weapon except when authorized by an officer or when he is not under the direct control and supervision ofan officer and circumstances justify the use ofdeadly force. He must be thoroughly acquainted with not only the prerequisites for the use of deadly force, but also that whenever he is operating as a part of a unit or element under the immediate command and control of an officer, the officer decides whether the firing oflive ammunition is necessary. For this reason, control force members should have ready access to an officer.
The use of deadly force can be justified only by extreme necessity. Accordingly, its use is not authorized for the purpose ofpreventing activities like curfew violations or looting that do not pose a significant risk ofdeath or serious bodily harm. If a mission cannot be accomplished without the use ofdeadly force, but deadly force is not pennitted under the guidelines authorizing its use, the mission must be delayed until sufficient nondeadly force can be brought to bear. The commander reports the situation and seeks instructions from higher authority. The use ofdeadly force is authorized only when all ofthe following conditions exist:
•
Lesser means have been exhausted or are unavailable.

•
The risk of death or serious bodily hann to innocent people is not significantly increased by its
use.

•
The purpose of its USe is one or more of the following:

http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm119... 12/28/2004
DODDOA-008792
•
Self-defense to avoid death or serious bodily hann.

•
Prevention of a crime that involves a substantial risk ofdeath or serious bodily hann, such as setting fire to an inhabited dwelling or sniping, including the defense ofother people.

•
Detention or prevention ofthe escape ofa person who, during detention or while escaping, presents a clear threat of loss oflife or serious bodily hann to another person.

Every soldier has the legal right to use reasonably necessary force to defend himself against violent and dangerous personal attack. The limitations described above are not meant to infringe on this right. However, it must be emphasized that a control force member is part of a unit and is subject to a chain of command. As such, he must act in accord with his orders and as a member of a unit. Therefore, unless an attack is directed at him personally and unless his response can be directed specifically at the attacker, his response must be governed by the guidance ofhis immediate supervisor.
In the United States and its territories, the acts ofindividual soldiers are. subject to civil laws as well as the provisions of the UCMJ. Reckless or malicious use offorce may subject soldiers to civil or cri
http://atiam.train.anny.mil/portal/atialadlsc/view/public/296872-1/fm/19... .htm 12/28/2004
~­
DODDOA-008793

CHAPTER 8
Crowd Control Formations
Crowd control formations, when properly employed and executed against a crowd oflimited size, are one of the most practical methods ofcrowd control. In selecting force options, the riot baton generally is the main weapon of the control force. If the situation is serious, the commander may consider employing a mix of batons and rifles. For example, the first line of the formation is anned with batons and the second or supporting ranks are anned with rifles or rifles with fixed bayonets.
Crowd control formations may be employed to disperse, contain, or block a crowd. When employed to disperse a crowd, they are particularly effective in urban areas because they enable the control force to split a crowd into smaller segments. When a crowd has been dispersed, the control force must not assume that they have capitulated and returned to peaceful activities. Small groups can initiate dispersed riotous acts. Therefore, the use of formations is only a part of the total dispersal effort. Ifthe crowd refuses to move, the control force may have to employ other techniques, such as riot control agents or apprehensions.
Commanders must realize the limitations of formations. Formations are not the answer to all civil disturbance situations. The commander must not subject his troops to unnecessary sniper fire and violence simply to impress the crowd with a show of force. When small, dispersed mobs are rampant in an area, formations are of little value. Even when a large mob has been split up, the problem is not necessarily solved .. The small elements that break away from the large mob may engage in small-mob tactics, such as sniping, looting, and burning. Commanders then, of necessity, must revert to area control measures, such as building searches, saturation patrolling, and other tactics.
Rooftops must be secured to help prevent sniper fire from these vantage points. Helicopter observation is one method of visually securing rooftops. Occupation of the rooftops is another. When troops are stationed in high buildings or on rooftops, all other troops must be informed of this to avoid the possibility ofcontrol force members being mistaken tor snipers.
Crowd control formations also may be used for more than just dispersal operations. If the decision is made to apprehend crowd members, the crowd control formation may be used as a blocking formation. Apprehension teams then escort apprehended crowd members back through the formation. (See Chapter 12.) A crowd control formation also may be used to aid containment operations by using blocking, flanking, and confrontation elements of the formation.
Commanders analyze the threat, the control force's missions, and how crowd control formations can be used to aid mission accomplishment. Experience has shown that the formations, to be effective, must be tailored to meet the situation. Whatever the modification, troops must be proficient in the basic formation movements to be able to react or adjust to a changing situation.
Civil disturbance training must that the soldiers understand the need to ensure stay in formation. Troops are much more vulnerable to attack when individual soldiers break ranks and chase after crowd members. The individual soldiers place themselves in danger, and the entire formation may be threatened if it begins to break down.
TYPES OF FORMATIONS
http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/fm119... 12/2812004
DODDOA-008794
Past civil disturbances indicate that the most frequently used formations are the line, the wedge;and the echelon. The line fonnation is used more often because ofits offensive and defensive applications. As an offensive fonnation, the line is used to push or drive crowds straight back, across an open area, or up a city street. As a defensive formation, the line is used to hold the crowd or to deny access to restricted
streets or areas. The echelon is an offensive fonnation used to turn or divert groups in either open or built-up areas .and to move crowds away from buildings, fences, and walls. The wedge is an offensive
fonnation that is used to penetrate and split crowds. The diamond, as an offensive fonnation, is used to
enter a crowd and is suitable for apprehending ring leaders. As a defensive fonnation, the diamond is used when all-around security is required. The circular formation may be used for the same purposes as
the diamond. The decision to use either the diamond or the circle is based on the confonnation of the
crowd. .
When a control force encounters large riotous groups, it may be best to employ vehicles with troops on foot in crowd centrol fonnations. Although vehicles add strength to fonnations, certain precautions must be taken. Precautions include:
•
Ensuring windshields ofvehicles are upright, removed, or completely depressed. Ifthe windshields are safety glass, they offer some protection in the upright position, minimizing the danger of injury from glass fragments.

•
Building shields for mobile barriers by mounting a wooden or metal frame strung with barbed wire across the front ofa vehicle.

•
Having foot troops in formation walk as near the front comers ofeach vehicle as possible to keep rioters from attacking the sides and rear ofthe vehicles.

Annored vehicles are employed when practical. They have a strong psychological effect, and they offer protection for the occupants. Wheeled armored vehicles are best because they do not deface the pavement.
Vehicles are used only in conjunction with troops on foot. Whenever vehicles and foot troops are employed, the commander ofthe foot troops commands the unit. He joins the leader of the motor section in the command vehicle, where he has a vantage point. In every instance, his commands are executed through the subordinate leaders.
Many suitable variations ofthe crowd control fonnations can be employed. But appropriate commands and signals must be devised to execute the fonnations. Because oftheir somewhat complicated nature and the coordination required for these fonnations, . new variations must be practiced extensively before they are used in an actual civil disturbance.
http://atiam.train.army.mil/portal/atiafadlsc/view/public/296872-1/fm119... .htm 12/28/2004
DODDOA-008795
HAND SIGNALS FOR FORMATIONS

WEDGE Extend both anns downward and to the .ides at 8 46·d.gree lingle. The arms and hands should be extended with 1he palms down and in.
•
•

DIAMOND
Extend both arma above the head. Bltnd the elbows slightly, altd touch the fingertips togflh.r.

.•• ECHELON .. RIGHT OR LEFT Exwnd one ann 45 degre.~.bo""the
hor;zontal and the oth.r 45 degr.., below the horizontal. The .rms aM handa should be elttended. The upper arm shows the direction of the echelon when 1he commander faces
the tfOOpt,
•
•

CIRCULAR Give the diamond aignal. Th.n ,ive a circum, motion with the right "-nd.
\VEAPO~ POSITIO~S
At the commander's discretion, the members of the crowd control fonnation may carry their weapons in any of the positions prescribed in FM 2.2.~5. Port anns is especially useful for resting support troops who are not in direct contact with the crowd. The positions for safe port, safeguard, and on guard shown below are for the M16 rifle. These positions are equally suited for the M14 rifle and the MI rifle. The hand grasps need only be altered where necessary.
The safe-port position is quite effective when making a show of force. In this elevated position, bayonets
http://atiam.train.anny.millportallatiahidlsc/view/public/296872-1Ifml19... 12/28/2004
DODDOA-008796
.can be seen by participants in the rear of the crowd. The sight ofbayonets can create an impression of· strength and numerical superiority.
Troops move into and assemble from all crowd control formations with weapons in the safe-port position. Troops automatically assume the safe-port position on the preparatory command for a crowd
control formation and when commanded to assemble.
Commanders use the safe-port position to impress rioters. However, troops should not be kept in the position very long as it is very tiring.
The safeguard position is a position of semireadiness. It is less tiring than the onguard position. It is used to rest troops when circumstances permit. For example, as troops advance, they maintain the safeguard position until just before contact is made or resistance is expected. The safeguard position can also be used when troops are pursuing a crowd that is 'Nithdrawing without resistance.
On guard is a position ofcomplete readiness. It is used whenever troops are in contact with a group that is showing any kind of resistance or hesitance to withdraw. It also is a tiring position to maintain for extended periods of time. Commanders must rest their troops at every opportunity by using less tiring positions.

WEAPON POSITIONS

SAFE PORT SAFEGUARD ON GUARD
COM;\:lA:\DS
Commands can be given to crowd control units in fonnation either orally or with hand signals. The oral commands for safe port, safeguard, and on guard are given in one count. All other commands are given in two counts, a preparatory command followed by an execution command. Oral commands cannot be relied on completely. Commanders must plan to use alternate methods for relaying commands. When it is necessary, commanders use hand and arm signals with oral commands.
The unit marches in column fonnation a reasonably safe distance from the crowd and within plain view of it. The unit halts and remains in fonnation. The commander decides on what crowd fonnation he desires for the situation. The unit is ordered into 9r assembled from crowd control fonnations while
http://atiam.train.army.millportallatia/adlsc/view/public/296872-1/fm/'19-15/CH8.h~_... __12/28/2=-O_04__
DODDOA-008797
halted. As each soldier reaches his proper position, he automatically faces in the direction of the unit's intended advance and comes to a halt. He remains halted in the safe-port position and awaits further orders. On the preparatory command, the troops automatically assume the safe-port position. On ·the
execution command, they fonn the fonnation. Once the troops are in the crowd control fonnation, the
commander commands, "Safeguard," and issues the proclamation. Following the proclamation, the
commander infonns the participants that they have aspecific time in which to comply with the order to disperse. If the participants fail to disperse within the given time, the cotnmander employs the measures needed to disperse the crowd.
When the commander gives the safeguard and on-guard commands, the commands are for the lead element only. When using squads in support and the commands for safeguard and on guard are given, the support squads automatically move to the port-arms position when the command ofsafeguard is given to the lead element. If the squads are in general or lateral support and must move to another support position, they assume the safe-port position. They move to the new support position and are then commanded to port arms. The support elements give a resounding stomp with the left foot when the lead element goes to the on-guard position. On the command, "Forward march," the support elements maintain the same half-step cadence as the lead element.
CADENCE
The usual cadence for moving troops into and out ofcrowd control fonnations is double time. The troops are at safe port when perfonning these maneuvers. When troops in a crowd control fonnation are moving in the safeguard position, the usual cadence is quick time. When they are moving in the on­guard position, the usual cadence is 60 steps per minute. For psychological effect, troops using the on­guard cadence may accentuate each left-foot step with a stomp.
The commander may increase or decrease the cadence, depending on the situation. For example, the commander may call a quick-time cadence to keep pressure on a crowd that is withdrawing.
lNTERVAL AND DISTANCE
Interval is the lateral space between elements. Distance is the space between elements in a column. The usual interval and distance between soldiers in crowd control fonnations are one pace or 30 inches.
Interval and distance can be adjusted for particular situations. The 30-inch interval may not be sufficient in some situations. It may have to be lengthened. Some police forces have found that a greater interval makes fonnation members less vulnerable to thrown objects.
COMl\-lANDER A:\D LEADER POSITIONS
When a unit is in a column fonnation, each echelon commander usually takes a position at the head of the column. In crowd control fonnations, squad leaders and their assistants, platoon leaders and their assistarits, and company commanders take positions where they can best direct and control their units. For diamond and circle fonnations, they place themselves in the center of the fonnation. For all other fonnations, they place themselves at the rear of the unit. However, these are only guidelines. The leaders can adjust their position with respect to their unit as they see fit.
In column fonnations, messengers, radio operators, marksmen, disperser operators, and other platoon HQ members usually take positions at the front of the "column. In a crowd control fonnation, HQ personnel, at the commander's discretion, may be positioned near the commander. If the situation does
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fml19...
DODDOA-008798
not allow this kind of positioning, HQ personnel may be positioned behind the control element.
Control force fonnations can be based on 12-man squads, 4-squad platoons, 3-squad platoons, and 3­platoon companies with 4-squad platoons. However, a 9-man or a 10-man squad can be adapted easily to the example for a 12-man squad. Any size squad, platqon, or larger unit can be employed, and a crowd control fonnation can be adapted to tit the unit's organization.
SQUAD FORMATIONS
When moving a squad into a crowd control fonnation from a column fonnation, the squad leader takes one or more steps to the right of the squad and faces the squad. He gives the hand and arm signal for the fonnation that he wants. He then gives the preparatory command. As he gives the execution command, he points to where he wants the unit to fonn. The squad's number two man, or base man, moves to that position. The squad fonns on the base man's position.

SYM SOLS FOR FORMATrON ELEMENTS
COMVANV COMMANDER i SQUAD MEMBER 0 PLATOON LEADER
MESSENGER.AND RADIO OPERAT,OR

l.£ ~
PLATOON SERGeANT SELECTED MARKSMAN
tR•
SQuAD LEADER DISPERSER [T]
." "
FIRE TEAM LEADER OR VEHICLE ASSI~TANT sauAO lE.AOER

rz ~
[Z] 0
SQUAD LINE
The command for having a squad fonn in a line fonnation is "Squad as skinnishers, move." On the execution command, the base man moves to the place indicated by the squad leader. The squad members align themselves in sequence on the base man, one pace apart.
SQUAD LINE R fGHT. LEFT
00 00 00 00 ®® [J [2']
RtGHT
® @ CD D (D D 00 00 u [gJ
)«
LEFT
Based on the situation, the squad leader may designate a specific interval. He does this when he gives the preparatory command. If no interval is specified, the squad automatically fonns using a one-pace interval.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-lIfm119... 12128/2004
DODDOA-008799

SQUAD ECHELON
The command for having a squad fonn in an echelon fonnation is "Squad echelon right (left), move." On the execution command, the base man moves to the place indicated by the squad leader. The squad members align themselves in sequence on the base man, one pace to the side and one pace to the rear.

SQUAD ECHELON LEFT

SQUAD WEDGE
The command for having a squad fonn in a wedge fonnation is "Squad wedge, move." On the execution command, the base man moves to the place indicated by the squad leader. Even-numbered squad members align themselves in sequence on the base man, one pace to the right and one pace to the rear of each preceding man. Odd-numbered members align themselves in the same way to the left ofthe base man.
http://atiam.train.army.mil/portallatialadlsc/viewIpublic/296872-1 lfinIl9-15/CH8.htm 12/28/2004
DODDOA-008800

SQUAD ASSEMBLY
When assembling a squad from the line fo~atiQn, the squad leader takes a position a sufficient distance to the rear ofthe squad and commands, "Squad assemble." At the same time, he raises his right hand in the air and makes a circular motion. Squad members who hear the command automatically come to the safe port position. The base man does an about-face. The other squad members face toward the base man. On the execution command, "Move," the squad leader points to the place where he wants the base man to assemble. The base man double-times to the designated spot, and the other members of the squad follow the base man. When the squad is in a column fonnation again, they are ordered to port arms.
To assemble from a squad echelon fonnation, the squad leader takes the same steps as for the line fonnation. The base man does an about-face. The squad members do either a halfleft face for an echelon right or a halfright face for an echelon left and follow the base man.
To assemble from a squad wedge fonnation, the squad leader takes the same steps as for the line and echelon fonnations. The base man does an about-face. All even-numbered men do a half left face, and all odd-numbered men do a half right face. They then follow the base man in sequence.
FOUR-SQLAD PLATOON FORMATIONS
Platoon headquarters consists of the following four people:
•
Platoon leader.

•
Platoon sergeant.

•
Selected marksman.

•
Messenger or radio operator.

When directed by the platoon leader, other people, such as disperser operators and firefighters, may augment the platoon headquarters.
In fonning all crowd control fonnations from the column, the platoon leader moves to the right ofthe platoon and faces them when giving his commands. He gives the arm and hand signal and the
http://atiam.train.army.millportal/atiaJadlsc/view/public/296872-I/finI1... 12/28/2004
DODDOA-008801
preparatory command. On the execution command, "Move," he points to the approximate location where he wants the platoon to form. The platoon leader pauses between the preparatory command and the execution command to allow each squad leader to issue a preparatory command to his squad.
PLATOON LINE
The command for forming a platoon line is "Platoon as skirmishers, move." Immediately following the platoon leader's preparatory command, the squad leaders of the first and fourth squads command, "Follow me." The squad leaders of the second and third squads command, "Stand fast." On the platoon leader's execution commanrl;, the first and fourth squads move forward to the point designated by the platoon leader. The number two man of the fourth squad is the base man for the platoon formation. The fourth squad forms a squad line to the right ofthe base man, and the first squad forms a squad line to the left of the base man, dressed on the fourth squad. After the first and fourth squads have cleared the platoon, the second'and third squad leaders command, "Follow me." The second squad forms a squad line to the left ofthe first squad. The third squad forms a squad line to the right on the fourth squad, all squads dressing on the fourth squad.
PLATOON UNE
2[, 1ST 4111 Stl
•

rs;' ~!D i
~

When assembling the platoon from the platoon line fonnation, the platoon leader and his HQ personnel take a position to the rear of the platoon. He then gives the command, "Platoon assemble," raising his right arm and making a circular motion above his head. The members of the platoon automatically assume the safe-port position. All squad leaders go to their number two men and face the platoon leader. All number two men do an about face. All other squad members do a facing movement toward their respective number two men. On the platoon leader's execution command, he points to where he wants the platoon to assemble. The squad leaders ofthe fourth and third squads command, "Follow me," and together they move toward the platoon leader. As the fourth and third squads clear the line formation, the first and second squad leaders command, "Follow me," and together they move toward the platoon leader, dressing to the left ofthe fourth and third squads. All squads halt automatically behind the platoon HQ and dress. After the squads are in column, the platoon leader commands, "Port arms." lfthe platoon leader wants the platoon facing back in the direction of the crowd control formation, he commands, "Counter-column, march."
http://atiarn.train.arrny.mil/portallatialadlsc/view/public/296872-1 lfin/19-1S/CH8.htrn 12128/2004
DODDOA-008802

PLATOON LINE WITH GENERAL SUPPORT

Whenever the command for establishing a crowd control fonnation contains the phrase, in support, without modificatio·n, it means that the support element is to remain in general support.
The command for fonning a platoon line with two. squads in general support is "Platoon as skinnishers, second and third squads in support, move." The first and fourth squads execute the line, while the second and third squads remain in the column. The number two man of the fourth squad is the base man for the fonnation.
To assemble a platoon with two squads in general support, the procedure is the same as for the platoon line, except the second and third squads do a counter-column. The fourth squad then dresses to the right ofthe third squad, and the first squad dresses to the left of the second squad.

PLATOON LINE, TWO SQUADS IN
GENERAL SUPPORT

lIO
~ ~o
ltQ"AO~_ (!)
\!J -----.QUAn

CD CD
CD @

CD (1)
® ®
® ®
[2] [2J
PLATOON LINE WITH LATERAL SUPPORT
The command for fonning a platoon line with two squads in lateral support is "Platoon as skinnishers, second and third squads in lateral support, move." The fourth and first squads execute the line as before,
http://atiam.train.anny.millportallatiaiadlsc/view/public/296872-lIfm119... 12/2812004 ­
----~ ------­
DODDOA·008803

. and the second and third squads stand fast. After the line has been fonned, the squad leaders of the' . second and third squads command, "Follow me." The second and third squads move out to their respective flanks. The second squad fonns a column behind the last man on the line to the left. The third squad fonns a column behind the last man on the line to the right.
The second and third squads may be moved from general support to lateral support at any time by the platoon leader. He commands, "Second and third squads, lateral support, move." To have the second and third squads join the line from either support position, the platoon leader commands, "Second and third squads, extend the line, move." The second and third squad leaders command, "Follow me." On the execution command, the squads set up individual lines, closing and dressing on the existing line.
PLATOON LINE. TWO SQUADS IN
LATERAL SUPPORT

t)"(1)0 CD 0 .. ··--2DCD SOVAn o [21•El~-G ~ 30-CD SOUAD CD
~) (i)
~~ CD0®
@' @

To assemble the platoon from a platoon line with lateral support is the same as for the platoon line,
except the number two men of the second and third squads do a right face and a left face, respectively,
toward their squad leaders. On the execution command, the fourth and third squads move to the point
designated by the platoon leader. As the fourth and third squads clear the fonnation, the first and second
squads move.
PLATOON LINE WITH CLOSE SUPPORT
The command for fonning a platoon line with two squads in close support is "Platoon as skinnishers, second and third squads in close support, move." The first and fourth squads execute a line as before. The second and third squads execute a second line to the rear of the first line and close in on the first line. The men in the supporting line cover the intervals between men in the first line. To do this, the squad leaders of the second and third squads command, "Stand fast." After the first and fourth squads
are in position, the second and third squads fonn lines as indicated.
To assemble the support squads from any position to general support, the platoon leader commands, "Second and third squads in support, move." The second and third squads then return to a column
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/frn/1... 12/2812004
DODDOA-008804
PLATOON LINE. TWO SQUADS IN CLOSe SUPPORT

~0iC8:l °i lZJ C8:l[C2:C8:l
:lD ~ 3D
SQU/I.D ~ L.!J :Dl SQUAD
~

PLATOON LINE WITH ONE SUPPORT SQUAD
The command for fonning a platoon line with one squad in support is "Platoon as skinnishers, third squad in support, move." The second squad moves out and executes a squad line right. The first and fourth squads fonn lines on the second squad to the left and the right, respectively. The third squad remains in column fonnation. The support squad may be used in lateral support on one or both sides of the fonnation. It also can be used in close support ofany segment of the fonnation. .
To assemble the platoon, the commander takes his position as before. On the execution command, the third squad does a counter-column. The fourth squad moves and dresses to the right of the third squad. The first and second squads then move and dress to the left ofthe third squad. When the third squad is in lateral support, the commander assembles the third squad first. He then assembles the fourth, second, and first squads as before. The same procedure applies when the third squad is in close support.
PLATOON UNE. ONE SQUAD IN LATERAL SUPPORT

PLATOON ECHELON RIGHT
http://atiam.train.anny.millportallatiaiadlsclview/public/296872-1/finI1...
~-~
DODDOA-008805
The command for forming a platoon echelon right is "Platoon echelon right, move." After the platoon leader's preparatory command, the squad leader of the first squad commands, "Follow me." The squad leaders of the second, third, and fourth squads command, "Stand fast." On the execution command, the first squad moves out and executes an echelon right at the location designated by the platoon leader. As each squad clears the column, the next successive squad moves out and extends the echelon that has been formed.
To assemble the platoon, the commander takes his position to the rear of the formation with the platoon HQ. On the preparatory corrni1and, "Platoon assemble," all squad leaders go to their number two men and face the platoon leader. The number two man of the first squad does an about face. The number two men of the second, third, and fourth squads do a left face. All other platoon members do a half left face. On the command, "Move," the first squad moves first, then the second squad, third squad, and fourth squad. Each squad dresses as it reaches the column formation.
PLATOON ECHELON RIGHT

PLATOON ECHELON LEFT
The command for forming a platoon echelon left is "Platoon echelon left, move." The platoon echelon left is formed in the same manner as the echelon right, but in reverse order. The fourth squad is the base squad and the remaining squads extend the echelon in reverse sequence.
Assembly of the echelon left formation is the re.verse of the echelon right. The fourth squad assembles
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fml19... 12/28/2004
~-----"
DODDOA-008806
PLATOON ECHElO N lEFT

http://atiam.train.anny.mil/portallatia/adlsc/view/public/296872-1lfinll 9-1 S/CH8.htm__... ) 2/28/2004
DODDOA-008807
PLATOON ECHELON WITH ONE SQUAD IN LATERAL SUPPORT ••• r.' I :::~] r', " L.:.:.... _ WITH TWO SQUADS IN LATERAL SUPPORT WITH TWO SQUADS IN GENERAL ~' SUPPORT ['~~o~~ z~ • ['~R5~'\.~:D 1" E 2';--'" .,,~ t ---,.. "10­[::J /j ~® ::][] m ~_~ -'-~ -~ " 2]0 WITH TWO SQUADS IN CLOSE SUPPORT

PLATOON WEDGE
The command for fonning the platoon wedge is "Platoon wedge, move." After the platoon leader's preparatory command, the squad leaders of the first and fourth squads command, "Follow me." At the same time, the squad leaders ofthe second and third squads command, "Stand fast." On the platoon leader's execution command, the first and fourth squads move directly to the front. When the last men of
http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-lIfm119... 12/28/2004
DODDOA-008808
the first and fourth squads clear the second and third squads, the squad leaders of the second and third squads command, "Follow me," and move out to the left and right, respectively. The number two man of the fourth squad is the base man for the formation. The fourth squad executes an echelon right. The first squad executes an echelon left on the base man. The second squad forms an echelon left on the last man ofthe first squad. The third squad forms an echelon right on the last man ofthe fourth squad, completing the wedge formation.
Assembling the wedge formation is basically the same as assembling the platoon line. The fourth and third squads assemble first. The first and second squads assemble to the left of the fourth and third squads.

PLATOON WEDGE WITH GENERAL SUPPORT
The command for forming a platoon wedge with twu squads in support is "Platoon wedge, second and third squads in support, move. 1.1 The first and fourth squads execute the wedge while the second and third squads remain in column formation.
http://atiam.train.anny.mil/portallatia/adlsc/view/public/296872-1/fm1.l... 12/28/2004
DODDOA-008809
PLATOON WEDGE. TWO SQUADS
IN GENERAL SUPPORT

PLATOON WEDGE WITH LATERAL SUPPORT
The command for fonning a platoon wedge with lateral support is "Platoon wedge, second and third
squads in lateral support, move." The first and fourth squads execute the wedge while the second and
third squads stand fast. After the first and fourth squads have cleared the column, the second and third
squad leaders command, "Follow me," and move out to the left and right, respectively. The second
squad fonns in column behind the last man of the first squad. The third squad fonns in column behind . the last man of the fourth squad.
To move the second and third squads from general support to lateral support, the platoon leader commands, "Second and third squads, lateral support, move." To have the second and third squads join the wedge from either general support or lateral support, the platoon leader commands, "Second and third squads, extend the wedge, move." The second and third squad leaders command, "Follow me," and move out to the left and right, respectively, to extend the wedge on the first and fourth squads.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fin/1... 12/28/2004
DODDOA-008810

PLATOON WEDGE. TWO SQUADS IN

LATERAL SUPPORT

~
r:?I 20
~SQUAD
PLATOON WEDGE WITH CLOSE SUPPORT
The command for fonning a platoon wedge with two squads in close support is "Platoon wedge, second and third squads in close support, move." The first and fourth squads execute a wedge. The second and third squads also execute a wedge and close in on the leading wedge. The men in the supporting wedge cover the intervals between men in the leading wedge. To do this, the squad leaders of the second and third squads command, "Stand fast." After the first and fourth squads are in position, the second and third squads then fonn a second wedge.
To assemble the support squads from any position to general support, the platoon leader commands, "Second and third squads in support, move." The second and third squads then fonn a column behind the wedge fonned by the other two squads.
http://atiam.train.army.mil/portal/atia!adlsc/view/puhlic/296872-1/fmI19... ~__J2/28/2004
DODDOA-008811
PLATOON WEDGE. lWO SQUADS IN CLOSE SUPPORT

PLATOON WEDGE WITH ONE SUPPORT SQUAD
The command for fonning a platoon wedge with one squad in support is "Platoon wedge, third squad in support, move." The second squad moves out and executes a squad wedge. The first and fourth squads fonn echelons left and right, respectively, on the second squad. The third squad remains in the column
formation. .
http://atiam.train.anny.millportallatia/adlsc/view/public/296872-I1fm119... 12/2812004
DODDOA-008812

PLATOON WEDGE. ONE SQUAD IN GENERAL SUPPORT
---3D
SQUAD
FORMATION VARIATIONS
During crowd control operations. the platoon leader may rotate his squads in the lead elements·ofthe
fonnation to give the squads a rest. He is not limited to using only those squads specified in the preceding examples as the lead elements of the fonnations. By changing his preparatory command, he may choose other squads to lead his unit. Ifhe wants the first and third squads to lead his platoon wedge, he issues the command, "Platoon wedge, second and fourth squads in support, move." By designating the support squad or squads in the preparatory command, the platoon leader tells the remaining squads that they will lead the fonnation. The number two man ofthe third squad becomes the base man.
The platoon leader also may relieve squads in the lead element by fonning the same fonnation with the support squads. The support element then passes through the lead element. This procedure is often necessary when protective masks are donned for riot control agent employment.
THREE-SQUAD PLATOON FORMATIONS
The execution of crowd control fonnations using a three-squad platoon is essentially the same as a four­squad platoon. The exceptions are that-­
• The first and third squads usually are used as the lead element in all fonnations in which one
http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-lIfm119... 12/28/2~00-=--4,---_
DODDOA-008813
squad provides general support or lateral support.
•
The second squad is the base squad in a platoon line when all three squads are committed to the lead element.

•
The support squad, usually the second squad, may be held in general support in single column or in column of two's.

The command for forming a platoon formation with one squad in support in a single column is "Platoon as skirmishers (echelon right, echelon left, or wedge), second squad in support, move." The first and third squads execute the formation while the second squad remains in column formation.
PLATOON UNE, ONE SOUAD IN GENERAL SUPPORT
1ST ~c
1-S~UAD --I-10"'100 ..:
~~
I2J ~ 0 tBJ
•
...

Ecd~

r2J

C8J
~

~.-.--20
1,\ aQlIAD

II
../'"
c::~
....• J
The command for forming a platoon formation with one squad in general support in a column of twos is "Platoon as skirmishers (echelon right, echelon left, or wedge), second squad in support in column of twos, move." The first and third squads execute the formation. The second squad, at the command ofits squad leader, executes a column of twos to the right.
When the support squad moves to either lateral support or to extend the existing formation, the even­numbered men move to the right, and the odd-numbered men move to the left. They execute these movements in the same manner as the support squads for a four-squad platoon. The squad leader usually controls the even-numbered men, and the assistant squad leader controls the odd-numbered men.
A three-squad platoon is assembled in the same manner as a four-squad platoon.
http://atiam.train.army.millportallatiaJadlsc/view/public/296872-1/fmI19... .htm 1212812004
DODDOA-008814
PLATOON LINE. ONE SQUAD IN GENERAL SUPPORT (COLUMN OF TWOS)

o ....r:g:] C2J
~
~ 0• 0
~

~

00 ®CD
ODD·NuMaERED MElli --_aCD 0 --E\lEN-NUMBfRED MEN
OF 20 SQUAD OF :lD S~UAD

00
®®

[2J
COMPANY FORMATIONS
When a company commander orders his company into crowd control fonnations from a column, he moves to the left or the right near the head ofthe column so he can be seen by the platoon leaders. He then faces the company. As he gives his preparatory command, he points to where he wants the formation. Ifhe does not indicate a location, the company forms immediately in front ofthe lead platoon.
COMPANY LINE IN DEPTH
The command for forming a company line in depth is "Company as skinnishers in depth, move." After the company commander's preparatory command, each platoon leader gives the command, "Platoon as skirmishers." The squad leaders follow with their respective commands to their squads to fonn the platoon line. On the execution command, each platoon establishes a platoon line immediately to its front.
If the company commander wants a more formidable formation, he commands, "Second platoon, close support, move." The second platoon moves forward and covers the intervals between the men of the lead platoon. The second platoon automatically assumes the same weapons position being used by the lead platoon, usually the on-guard position. The platoon leader of the third platoon then moves his platoon forward to occupy the position formerly held by the second platoon.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fin/1... 1212812004
DODDOA·008815
0 D1 COMPANY LINE tN DEPTH --L 15' .....TOOfil C8J 0 ~ 0 ~ IZJ • i 8 ~ G~r~ ~ L_ : :,o~~rO(Wj I8J 0 ~ 0 .C8J 0•E!~j eDIT] ~ ,..__--JDPlAlOON r;gJ I2:l

If the third platoon is called on to support the company line, it moves forward and takes up a position directly behind the second platoon. The m~nofthe third platoon hold their weapons at safe port. Platoon and squad leaders and their assistants help each other in controlling the company.
COMPANY LINE IN MASS
The command for fonning a company line in mass is "Company as skirmishers in mass, move." The company line in mass is the same as a company line with both platoons in close support. Instead of fonning it in stages, the company commander indicates his desire for this formation in his initial command. The platoons each form a line, and the second and third platoons close on the first platoon without further commands.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008816
COMPANY LINE IN MAS.S

COMPANY LINE IN MASS. ONE PLATOON IN DEPTH

) 7
L?J.:?1C8JIZI~[?'JLXJIZl8JlZlr&llZIX'IZI"5$l?J
. , .

8~~-J ~!(;-J lSME~1[~]
SJ
/. . ---:011 ...,010001
C8'Jc:?'J~0~012SJ12J
i
~ [!J~
t8J
COMPANY LINE WITH SUPPORT
In company formations, the first platoon usually forms the lead element and the second and third platoons provide support The support platoons can be employed in the same manner as the support squads in platoon formations_ One platoon can be relieved from the lead element by another platoon while in formation by having a support platoon pass through the lead platoon.
http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-1/fmlI9... .htm 12/28/2004
DODDOA-008817
COMPANY LINE IN MASS. ONE PLATOON IN LATERAL SUPPORT

L'STANC:rO 3D AND 4TH----J
1I0U.t.OS OF SQU"DSOf
3D PLATOON 3D PLATOON

COMPANY LINE, ONE PLATOON IN GENERAL SUPPORT AND ONE
PLATOON IN' LATERAL SUPPORT

./ 1ST PU.100N

------.

00

C8: ..
r--L' ~.
[~MJ ~~ • §] • f"'D'
..­
lL:j ~
~ ~
~ ~
~
.~.j ISMI ~

If '.71 t !iL ..J
! I ...j­
L-1sTAI'II020
30 ANO 4TH­SOUADS OF
SOUAOS Of
~:..:.:~;
20 PLATOON
20 PLATOON
'----30,.LATOON
COMPANY ECHELONS AND WEDGE
Company echelons and the company wedge are fonned in the same manner and with the same variations as the company line.
A company assembles from a crowd control fonnation the same way a platoon or a squad does. However, due to the size of company fonnations, the commander must consider the area that the company is operating in when he assembles the company. Ifhe follows the guidelines of platoon assembly, he will have no difficulty. When assembling the company, the commander takes a position to the rear of the fonnation and commands, "Company assemble." The platoon leaders take charge of their
http://atiam.train.army.miliportaliatiaJadlsciview/public/296872-1 /fmI19-15/CH8.htm 12/28/2004 ..­
-~
DODDOA-008818
respective platoons. Usually, the third platoon assembles first,just behind the fonnation. After the third platoon is assembled, the second platoon assembles in front of the third platoon. Then the first platoon assembles in front of the second platoon. All platoons assemble facing the commander. The second and third platoons then dress on the first platoon. As each platoon is assembled, they are ordered to port arms by the platoon leader to await further orders from the commander. Iffour platoons are used, the fourth platoon assembles first. -
COMPANY ECHElON'f0NE PLATOON IN GENERAL SUPPORT AND ONE
PLATOON IN LATERAL SUPPORT
~

I~
'U" tZJ
_--3D ANI) 41H SOUADS OF:O Sl TO -----0;
PLATOON
1 PIA OA ,/ ~ L//I

~~. ~
. Is~~:Elkj
o

•
...

~[!j~
C: ---3D4"LATOON
.._ --1ST A"I) 20 SCUAOS OFlD
PLA100"
http://atiam.train.army.millportaliatiaiadlsc/view/publicl296872-1/finIl... 12/28/2004
DODDOA-008819
. COMPANY ECHELON IN MASS. ONE PLATOON IN LATERAL SUPPORT

http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-1/fm119...
12/28/2004
DODDOA-008820

CO:MPANY ECHELON IN DEPTH . . ONE PLATOON IN GENERAL
SUPPORT'
C81'
~--2DPUll"OC*
COMPANY ECHELON iN MASS, ONE PlATOON' IN GENERAL
SUPPORT
http://atiam.train.anny.millportallatiaiadlsciview/publicl296872-1/fmI19...
12/28/2004
DODDOA-008821
WITH lWO PLATOONS IN GENERAL SUPPORT
t8'J •......'--IE • (2j (!!JG:fi::!J IZi
z,
lZi iElcrl

*88m
..ftO __ 1 \
I I
rBJ
'[!j~C!J

m_-IIII
cfu

10~';'£

COMPANY WEDGE
IN MASS, ONE PLATOON IN
,CLOSE LATERA.L SUPPORT

WITH ONE PLA.TOON IN
GENERAL SUPPORT. ONE
PLATOON IN LATERAL
SUPPORT

COMPANY FORMATIONS WITH VEHICLES
The commands for vehicles and foot troops are the same as for foot troops alone. Because of the additional noise and distances involved, the company commander gives the arm and hand signal for the line. The command and the signal apply to the lead platoon only. The other platoons remain in general
support until further directed.
The motor section moves out first. The number two vehicle, moving to the right, passes the lead vehicle and establishes the position for the center of the line. At the same time, the third and fourth vehicles swing out to the left and right, respectively. They fonn to the left and right and slightly to the rear of the number two vehicle. The first and fourth squads of the lead platoon then move forward and fonn lines to the left and rigbt, respectively, on the front end of the number two vehicle. As soon as the troops are in position, the third and fourth vehicles close in on the squads and tighten the fonnation. The second and third squads of the lead platoon then fonn a line to the left and right of the third and fourth vehicles to complete the company line. The command (number one) vehicle takes up a pOSition behind the line
http://atiam.train.army.miI/portal/atiaiadlsc/view/public/296872-I/fml19... 12128/2004
~----~~--­
DODDOA-008822
where the commander can direct and control the unit. The second and third platoons move forward and
. are used in general, lateral, or close support. In some instances, the foot troops may move into position first, and the vehicles join the fonnation as needed.
To fonn company echelons or a company wedge with vehicles, the company follows the same
procedures used for company fonnations without vehicles. Vehicles are moved into appropriate
positions using procedures similar to those used for a company line.

To assemble troops and vehicles, the command vehicle moves to a position behind the fonnation. The commander faces the fonnation and gives the vehicle section the hand signal for assembly. Immediately, the vehicles return to their proper positions in column behind the command vehicle while the troops stand fast. The second in command then assembles the troops in the usual manner.
http://atiam.train.anny.mil/portal/atiaiadlsc/view/publicI296872-1/fm119... 12/28/2004
DODDOA-008823
COMPANY COLUMN·WITH

VEHICLES

o
o
o

o

.cD~G

. ..., --l~:P1ATODN.;.'
'.oW.'!'-.• ,._~ .
:~',:~
""t25J
~:cd~0
--2DI't..4oTOON
c8J

.m~0
I-31) "-ATOOJf
r
c8J

http://atiam.train.anny.millportallatiaiadlsc/view/pubIic/296872-1/fin11... 12/28/2004
~~
DODDOA-008824
COMPANY laNE WITH VEHICLES. TWO PLATOONS IN.GENERAL SUPPORT
/aoJlauAo L'SlSOUIID r-;, /",.. aoUAD /30S01J~
I2'l . IZilPJ0lJLj rE: ~l[Z1 ~
! LJ
7b1
l2$J_1
• C\

~r--1 1 /
~• [i~~ .. I I~ ±4'
• L.:J~L.!'-;
--20"IATOO"
I I
. ...±
+ -'. C8J
.~~[!J
--II)PUl.TOOW
COMPANY LINE WITH VEHICLES. ONE. PLATOON IN GENERAL SUPPORT, ONE
PLATOON IN LATERAL SUPPORT

liD aOUAD OF
7 \" 1ST _TOOH

0rJ~
•
~0[!J ~

so lIND 4TH .CU/oD!I--­
--'51'AIIO 2D aOUADII
OF to PLATOON
OF 20 "t.t,ODt.I
!ZJ
--!lDPLATOOt.l
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
.------_._--­
~-­
DODDOA-008825
COMPANY ECHELON WITH VEHfCLES. ONE PLATOON rN GENERAL
SUPPORT, ONE PLATOON IN LATERAL SUPPORT

'STP""TOO~-----
If'~ /0: 0
// y:2J.
// l ,0 ~~jQJ
tS
I . II ,.
/ i / ,
/
./
i
.3D"NO.TH~
SOU"~OFJD
/~'10

PLATOON
/

---.JDPLATOON
~--1IlAND2D
aQUA.CSOF
;[Z
2tl PUlitOON
I~
I
I~
I
http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-1/fm119... 12/28/2004
DODDOA-008826
COMPANY LINE IN MASS WITH VEHICLES. ONE PLATOON IN GENERAL
SUPPORT

ta IOOII
C
.c2..n&fClGk ..... _Gfo
..1\. .r
____ 17 ,: _.___ (7)llJZlLXJ ' 1:?1XUznLJ[ZJC8JIZDJ" 12J/1ZI
• -,r"1: t, i
C!!:ctiL~ I-i' ~ ~8m
t
~
ZJ L-.J S1
.~~0
I I
I
I J i_.-»ouroo..
http://atiam.train.anny.millportallatiaiadlsc/view/publicl296872-1/fm/19... 12/28/2004
DODDOA-008827
CHAPTER 9
Riot Control
Agents Riot control agents or water can be used to distract, deter, or disable disorderly people. Usually their effects are temporary and disappear within minutes of exposure. The choice ofwhether to use a particular riot control agent or water in a given situation is based on the physical characteristics of the target area. Weather, especially wind, affects the employment of riot control agents and water.
Planning is essential for the successful use of riot control agents. The plans must be flexible to accommodate changes in the situation and the weather. Above all, strict accountability and control of the employment ofriot control agents is a must. Riot control agents are employed only when the task force commander specifically authorizes their use. Employment must be strictly controlled. Every instance of employment must be duly reported.
Other planning factors are the cause, nature, and extent of a disturbance and the crowd's demeanor and
intent.
Based on an analysis ofthese factors, the commander makes an estimate of the situation. The estimate
must be as thorough as time permits. Using the estimate, the commander considers courses of action,
selects riot control agents, and determines munitions needs. The main factors in choosing a course of
action are the desired effects, the crowd's demeanor and intent, the weather, and the types of munitions
available.
Plans also must address security ofriot control agents during storage, transportation, and employment.
The use ofriot control agents must be coordinated with all crowd control forces. Leaders who supervise the employment of riot control agents should have wireless communications equipment.
Civil disturbance operations in cities often take place either on narrow streets or in park areas. Standard control procedures do not work well in such instances. Wind direction, the size of the area, and the proximity ofhealth facilities may preclude the use oflarge quantities ofriot control agents. In such cases it may be necessary to use low concentrations to break a crowd into smaller groups.
The on-site commander obtains weather forecasts for the operational area. The forecasts must cover the times when dispersal operations will be performed. The commander evaluates the forecasts in conjunction with a map, a detailed reconnaissance, an aerial photograph, or a mosaic study of the terrain in the operational area. Through his evaluation, he estimates the effects of a dispersal operation.
When dealing with large crowds, the control force's objective is to disperse the crowd and to move it in a specific direction, usually away from the disturbance area. Against large crowds, riot control agents usually are employed to cover the target area with a cloud of sufficient strength to produce decisive results.·Once the proper concentration is reached, the control force must maintain that concentration until the crowd has been dispersed. When dispersers are used, the dispersal team maintains the concentration by moving the disperser along the release line at an even rate. They maintain the concentration by repeating the application as necessary.
The control force must have a follow-up plan for exploiting the advantage gained by employment of riot control agents. Clear escape routes prevent panic and the melee that may result as the crowd scrambles for an exit. Public address systems may be used to direct the crowd to the escape route. They also may
http://atiam.train.army.millportallatia/adlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008828
be used to give first aid instructions. It may be necessary to move masked troops into the target area to disperse lingering groups, to prevent regrouping, or to prevent further illegal activity. During follow-up operations, troops must be ready to help unconscious or incapacitated people in the contaminated area.

http://atiam.train.army.millportal/atiaJadlsc/view/public/296872-lIfm119... .htm 1212812004
DODDOA-008829
RIOT CONTROL AGENT RELEASE PAITERN IN A FLANKING WIND

Small groups of 25 to 50 people may gather during disorders and throw objects at cars or congregate near stores that have been partially looted. Patrols can employ low-volume riot control grenades to break up small groups and temporarily prevent further misconduct. This low volume use of riot control agents enables a few troops to disperse a group without calling for more manpower and equipment. The limited use of an agent must be preceded by a careful assessment ofthe composition and mood ofthe group. If the group is highly motivated or inclined to violence, a small amount ofagent may only provoke an attack on the outnumbered patrol. High-pressure water can be effective for moving small groups on a narrow front, such as a street, and for defending a barricade or a roadblock.
When used against rioters, riot control agents must be used in sufficient quantities to produce an immediate, decisive effect. Troops using the agents must provide avenues ofescape for the crowd.
Except for extreme emergencies, riot control agents are not used when hospital patients or school
children may be affected.
The riot control agent CS comes in two forms: a pyrotechnic; mixture and a powder. It has a pungent pepperlike odor. Its persistency varies according to wind conditions. In powder form, it has greater persistency when there is no wind or when it is dispersed in wooded terrain. Its effects occur within a few seconds after exposure.
As a pyrotechnic mixture, CS is dispersed by means of an M47 hand grenade or a 40-millimeter cartridge and the M203 or M79 grenade launcher. When using the M203 or M79 and the 40-rnillimeter
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008830
cartridge, the troops must be warned that, because ofthe projectile's high velocity, it can cause serious injury or death at close range. Troops must-exercise extreme caution when using this munition. In the powder form, CS is dispersed by means of the M47 hand grenade and by mechanical dispersers.
A protective mask and field clothing protect against the effects ofCS. First aid for CS contamination is rendered by moving affected people to uncontaminated areas, facing them into the wind, and cautioning against rubbing the eyes or touching the genitals or mucous membranes. Showers provide further relief. Affected people should be kept away from each other.
R lOT CONTROL AGENT CHARACTERISTICS AND TREATMENT
cs '1 CR
I.
OEUVEAV MEA.NS
EMPLOYMENT
CONDITIONS
PER SISTENCY
TIME TO MAXIMUM
HFI:CT

ol)RATloN OF EFFECTS
Dp.livt'rrJn bv hi,,,,1 !l••m:IlI"". rrll.. !ll4!I'"d~!'I. rill~ Airlr.il !\(,ft projectiles. or n a dryapray bV IYIJlA1 or M5 (/'$I)I)'S'"
~ :u. !flf),ioIl..~S' 4JI tiCI wnen tn""~' l",nU .; en n.. win". efff!t:li"4!I1"~!; !rr"l'IIiV d,mllllsh4!d bv
,..,,.,
Volll''';~ (lccora,no .0 Win.. conllluons;
pOWdP.f '''lnl 1'P.r~'M$ I.\"!,,,, 'n $1111 b;r ""II in wflOIll.'d wrriltrl 15 not to btl 1I511tJ in bl',I:h1'l9~. ncC", /'(l"rt,'al •. n, It! ol'll"l~ ....11 P-I t! It/1QP.tIR9 cont~n'il'::1ti"n could ciluse probloms
Dl!lilo'ered .,5 a wet sprllV or stream by M33A1 0' M36 di.per...r
Iii IIneetllN uncrvnmeonorhonli except Ill9n winds. effeclilleness onl\l ~li!Jlltlv dfminili~.d bV rain
Lingers In elr. o"A IIIsung.•"11 en .c...e V windblown: olltremely pe,sili1ont on
5urt~CI!5
.1$ no' to be uled In b\lildif\9s. nt-ll' hospitllis. or in ar••s where lin,."ns. eon'ltnlillllcion could CII":Je l,rQt)lems
Requirp.s 20 to 60 ~ecnl\f'h r
Acts immcdl.talv 0" OJlpORd _reus ILIIIStS. JeW minutes wnen vIctim" mOWid
LiI"l~ 5 10 1 0 n'''HltI~s
10 an 1Jnc:ol1tamln:ned ate..
EFFECTS
-
MINIMUM PROTECTION
FIRST AID
1...i11J!(P'~ e.."p.me ournlng s.."sat'on III IIlI! . t,,;euSU::I "'Ilatlon Of noslt ilnII tnro.t; eV~5. abundllnt tlow of I • .'ilrs. ~o\to"mli.
:stinging $~ns.lion of tkin; and j"it.,ioll of b,p.llthing dirli,:ulty. li{jhtn/ll~$ in ChP.AI.
.elpIJ,"o,V liYltlrm. including coulJhing. !lwolvnt.ry etos;n!) O. 8yes. Slinging
c~.!n lJains.•"lIl f",ing nf MlffOC.llon sensllti('l11 011 moist slci,. IIrP.ls. sinus find n~$,;.1 ""p. ,.mel .)a"$t". Jlnd IIOfl.III/l1l 011
."posur. to high C:0I1Centroiltio"5. f!S,If!c:i1l/4y "",hp.•••ngC!1t':cl I
RIXllmr:S Wf)feccillelfl"":\s ..n\! ,,(\111 CIOfhio!l
Muv.~ .... i(':[ltll tu un(;OuIA'fllI",,'nd Br~•. IftC~ victim into wma. Cilulifn victIm not 10 rub "Y"S. k"~IJ "1It«:',,ot ""lll,lt! """II ",,,..I. h,..,p. victim f.how@1Iirsl with cool willor tor J to 5 rniIIIILP.':S~ lIl"n Oloe"''''! wilh hllunitl ~hOWClri"(1. for gross GUnlilm'nCltlon. tty,h " ..dy w,th I!'I'll" mnO"nl~ "I Cllol Will",. 'hun w.:Ish with it 5'," '!iOdll.m b,svlhtll ~OhJljflJ) ,...(".... , ;,', (111(' /0''''1''111 "V";:), ~l1d
flush again with wiltl!r ia 1..... solution 0' ~c)t!"U"l Carbon,He 0' 0' s (teli um bkllroonat!! may b~ "'l.Ohstituf .. d fnf the f;od'lIl11 blsulf.!U .sOil,ItOI1I
Kelll"rello protectIVe mll.lI. /)OOIl. and rubber glov.~
Mnvl!' lIictim to uneontllmini'ed ••ea. fl\1Sn evos wiln wat•. ctJecll 8VltS to, .,bratliions. .~Qwe, Wf!1l or WAlh .nd sc,uh uposed I'US with lio.1p .nd W.18r; get victim to dnr.l(lr if rp._clion oersiS1$
WARNING:
HOlllllhold bloach 4104:1;11"'" "vj)ochlorite solutionl is NOT to be used in was~Dr rinlil!" Wi)tcn to docontllmlnille clo'hin9·
equipmf!nt. or pf!Oplft. CA and tlou:sehokl bleilc:h ..ac1 to produce. harmful vapor
GRENADES
There are two types of riot control grenades in the Army inventory, a burning type and a bursting type. In a wind of about 6 miles per hour, a burning-type grenade can cover an area about 5 meters wide to a downwind distance up to 25 meters. At the same wind speed, a bursting-type grenade can cover an area
about 10 meters wide to a downwind distance up to 25 meters.
Burning-type CS grenades and agent dispersers are the means usually employed against large crowds. Bursting-type grenades may be used for psychological effect or to discourage crowd members from trying to throw back grenades.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008831
.Burninggrenades are thrown by hand or delivered by a grenade launcher to the upwind side of the crowd. Burning grenades must not be thrown into a crowd because they can be picked up and thrown back. Bursting grenades are thrown into the air so that they burst several feet above the crowd:
When the control force is in almost direct contact with the crowd, burning grenades are not used. Either the grenades will be thrown back at the control force or the front ranks of the crowd will be driven into the control force. In this situation, dispersers are used if conditions favor their use behind disturbance
control lines.

DISPERSERS
Dispersers provide commanders with a means ofdisseminating riot control agents in sufficient quantities to provide effective coverage in a variety of situations and conditions. But their use is limited to outdoor areas. Control force leaders must be careful when employing riot control agents in confined areas and in areas with restricted avenues of escape. Dispersers usually are transported by soldiers, by ll4-ton or larger vehicles, or by helicopters. When transported on the ground, the dispersers may be directly integrated into the crowd control formations. Or they may be operated in direct support of civil disturbance operations. Helicopter-mounted dispersers are used in close conjunction with the control force. The exact placement of the aircraft with respect to the formation is determined by current wind direction and speed and by physical obstacles that may restrict the movement and positioning of the aircraft.
All unit members should know the operation and employment capabilities of the riot control agent dispersers. But the unit must depend on specially selected and trained soldiers. The criteria for selecting disperser operators include initiative, ability to learn, and the ability to deal with large numbers of agitated people calmly.
The disperser operator works under the immediate control and direction of an officer or an NCO. Riot control agents are released only on the direct orders ofthe commander. If the commander is not fully qualified in employing riot control agents, a qualified officer must be designated to determine the appropriate time, place, and amount ofagent to be released and to issue appropriate commands to the
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1Ifm119... 12/28/2004
DODDOA-008832
operators.
Disperser operators and dispersal team members must be well qualified in their primary MOS and
thoroughly trained in riot control operations. Preferably, they should receive special training in the use
ofriot control agents.
Riot control agent dispersers can release a large amount ofriot control agent in a very short time.
Operators must be especially careful to avoid releasing intolerable concentrations of the agents. The
operators must determine the average release rate for each disperser in terms of pounds of the agent
released per second. The dispersers are not used to deliver riot control agents directly into a closed
structure except in extreme circumstances.
Commands are given the disperser operators by voice or by hand and arm signals. The troop commander
maintains radio contact with the officer or NCO who is in command ofthe crowd control formation or
of the disperser operators.
Troops who are involved in filling, operating, or transporting dispersers wear ordinary field uniforms
with collar and cuffs buttoned and trouser legs tucked into their boots. They also wear a protective mask,
a hood, and rubber gloves for protection.
The commander must decide which riot control agent will be used in each disperser before the mission
begins. Wet and dry agents cannot be interchanged in the same disperser during a civil disturbance.
mission. Not only must nozzles be changed, but the whole system must be decontaminated before
changing types of agents. For further information on decontamination procedures, see FM 3~.
To ensure the dispersers operate properly, operators must perform inspections and maintenance
systematically each time the equipment is used. They also service the equipment periodically whether it
has been used or not. Because of the corrosive effects of some riot control agents, the agents must be
removed from the surface ofdispersers and the vehicles or helicopters that dispersed the agents. Detailed
maintenance, inspection, and repair instructions can be found in the applicable technical publications.

M36 DISPERSER
The M36 disperser, like other aerosol irritant dispersers, serves as an alternative to traditional weapons,
such as nightsticks, riot batons, and firearms. As with other riot control weapons, the M36 must be
backed at all tiines by troops with weapons ofgreater force.
The M36 disperser is a lightweight, aluminum and plastic container filled with pressurized CR solution.
It is small enough to be carried and operated with one hand. To use the M36, the soldier holds the can
upright, aims at the person's face, and presses the activator button. The stream of wet CR vaporizes. It
causes a temporary, reflexive closing of the eyes, tearing, and a burning sensation on the skin and in the
upper respiratory tract.
The most effective way to use the M36 is in one-second bursts. The maximum range is 10 to 12 feet.
This allows the soldier to adjust his aim with a minimum waste of the riot control agent. The soldier
must not spray a person for more than five seconds when closer than 3 feet. After being subdued, the
person can best be decontaminated by facing the wind or by generous flushing with water for several . minutes. See FM 8-285 for more information on first aid procedures.
Troops using the M36 must be thoroughly trained in the use and hazards ofthe disperser. Training must
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/finIl... . __~12/28/2004
DODDOA-008833
include situations in which the M36 may be used, how to use it, a demonstration of the stream trajectory, safety requirements, and decontamination procedures. Because the use ofthe M36 does not cause immediate incapacitation, training on tactics and disperser limitations is necessary.
The disperser is carried and stored in a compact vinyl c;ase with a snap button and a belt loop. The ammo pouch may be used as a field expedient carrying case.
M3G EMPLOYMENT AGAINST AN INDIVIDUAL

M33Al DISPERSER
The M33Al disperser is a lightweight, portable riot control agent disperser that uses either dry or wet riot control agents. The agent is released through a nozzle on a hand-held gun assembly. Different nozzles are used for the powder and the liquid. The special nozzle for the wet agent allows the operator to vary the amount and range of the solution by choosing spray or stream. The operator controls dispersal by varying the pressure on the trigger.
The hose and gun group controls the amount of riot control agent released. The agent may be released in a continuous stream or spray or in short bursts ranging from less than one second to several seconds. Operators must determine the particular release rate for each disperser that they operate, both for talc and for riot control agents.
Worn as a backpack, the M33AI looks and functions like the portable M33 disperser. The difference lies in the units' capabilities. The M33Al disperser's modular design allows quick replacement of empty agent and pressure containers. The M33Al can use either dry or wet agents without having to modify the unit itself. The M33AI is replacing the M33 on a one-for-one basis as the M33s wear out.
The effective use of the M33AI depends on a following or slightly quartering wind with a speed ofless than 20 miles per hour. Optimum wind speed is 3 to 5 miles per hour. Usually, the use of this disperser is backed up by other dispersers to ensure adequate coverage of the target area.
http://atiam.train.army.mil/portal/atialadlsc/view/public/296872-1 lfinI19-15/CH9.htm 12/28/2004
DODDOA-008834
M33A1 EMPLOYMENT DISPERSING A WET CR STREAM

M33A1 EMPLOYMENT DISPERSING A DRY CS SPRAY ~
http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-1/fml19... .htm 12/28/2004
DODDOA-008835
SOLDIER EQUIPPED WITH M33A1
RIOT CONTROL AGENT DISPERSER

The agent tank and the air pressure bottle both have a quick-disconnect capability. But unless there are sufficient tanks and bottles available, the disperser may be out ofaction for a period oftime, depending on the location of the compressor and the soldiers' ability to reload and repressurize the disperser. Because ofits compactness, portability, and low cost, the M33Al provides the user with an immediately available and very effective crowd control weapon.
The disperser operator may be positioned in front of, as a part of, or behind the crowd control fonnation. Proximity to the crowd and the disperser's r
http://atiam.train.arrny.mil/portallatiaiadlsc/view/public/296872-1/finI... __ _ 12/28/2004
DODDOA-008836
CHAPTER 9
Riot Control
Agents Riot control agents or water can be used to distract, deter, or disable disorderly people. Usually
their effects are temporary and disappear within minutes of exposure. The choice of whether to use a
particular riot control agent or water in a given situation is based on the physical characteristics of the
target area. Weather, especially wind, affects the employment of riot control agents and water.
Planning is essential for the successful use of riot control agents. The plans must be flexible to accommodate changes in the situation and the weather. Above all, strict accountability and control of the employment ofriot control agents is a must. Riot control agents are employed only when the task force commander specificaUy l'uthorizes their use. Employment must be strictly controlled. Every instance of employment must be duly reported.
Other planning factors are the cause, nature, and extent of a disturbance and the crowd's demeanor and
intent.
Based on an analysis of these factors, the commander makes an estimate of the situation. The estimate
must be as thorough as time permits. Using the estimate, the commander considers courses of action,
selects riot control agents, and determines munitions needs. The main factors in choosing a course of
action are the desired effects, the crowd's demeanor and intent, the weather, and the types of munitions
available. .
Plans also must address security ofriot control agents during storage, transportation, and employment.
The use of riot control agents must be coordinated with all crowd control forces. Leaders who supervise the employment of riot control agents should have wireless communications equipment.
Civil disturbance operations in cities often take place either on narrow streets or in park areas. Standarq control procedures do not work well in such instances. Wind direction, the size of the area, and the proximity ofhealth facilities may preclude the use of large quantities of riot control agents. In such cases it may be necessary to use low concentrations to break a crowd into smaller groups. .
The on-site commander obtains weather forecasts for the operational area. The forecasts must cover the times when dispersal operations will be performed. the commander evaluates the forecasts in
conjunction with a map, a detailed reconnaissance, an aerial photograph, or a mosaic study of the terrain in the operational area. Through his evaluation, he estimates the effects of a dispersal operation.
When dealing with large crowds, the control force's objective is to disperse the crowd and to move it in a specific direction, usually away from the disturbance area. Against large crowds, riot control agents usually are employed to cover the target area with a cloud of sufficient strength to produce decisive results. Once the proper concentration is reached, the control force must maintain that concentration until the crowd has been dispersed. When dispersers are used, the dispersal team maintains the concentration by moving the disperser along the release line at an even rate. They maintain the
concentration by repeating the application as necessary.
The control force must have a follow-up plan for exploiting the advantage gained by employment of riot control agents. Clear escape routes prevent panic.and the melee that may result as the crowd scrambles for an exit. Public address systems may be used to direct the crowd to the escape route. They also may
http://atiam.train.army.mil/portal/atia!adlsclview/public/296872-1/fin/1... .htm _ ____12/28/2004
DODDOA-008837
FM 19-15 Chptr 9 Riot Control Agents
be used to give first aid instructions. It may be necessary to move masked troops into the target area to disperse lingering groups, to prevent regrouping, or to prevent further illegal activity. During follow-up operations, troops must be ready to help unconscious or incapacitated people in the contaminated area.
RIOT CONTROL AGENT RELE~SE PATTfi:RN IN A FOLLOWING WIND
/tJ!l~1
....
I
-i-1--..
LINE
i
,I'!
, , , , ,
,
,
,
,
,
,

http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fml19... .htm 12/28/2004
DODDOA-008838
RIOT CONTROL AGENT RELEASE PATTERN IN A FLANKING WIND

Small groups of 25 to 50 people may gather during disorders and throw objects at cars or congregate near stores that have been partially looted. Patrols can employ low-volume riot control grenades to break up small groups and temporarily prevent further misconduct. This low volume use of riot control agents enables a few troops to disperse a group without calling for more manpower and equipment. The limited
use of an agent must be preceded by a careful assessment of the composition and mood of the group. If the group is highly motivated or inclined to violence, a small amount of agent may only provoke an attack on the outnumbered patrol. High-pressure water can be effective for moving small groups on a narrow front, such as a street, and for defending a barricade or a roadblock.
When used against rioters, riot control agents must be used in sufficient quantities to produce an immediate, decisive effect. Troops using the agents must provide avenues of escape for the crowd. Except for extreme emergencies, riot control agents are not used when hospital patients or school children may be affected.
The riot control agent CS comes in two forms: a pyrotechnic; mixture and a powder. It has a pungent pepperlike odor. Its persistency varies according to wind conditions. In powder form, it has greater persistency when there is no wind or when it is dispersed in wooded terrain. Its effects occur within a few seconds after exposure.
As a pyrotechnic mixture, CS is dispersed by means of an M47 hand grenade or a 40-millimeter cartridge and the M203 or M79 grenade launcher. When using the M203 or M79 and the 40-miIlimeter
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-lIfm119... _J2/2~/2004 ~~_
DODDOA-008839
cartridge, the troops must be warned that, because ofthe projectile's high velocity, it can cause serious injury or death at close range. Troops must-exercise extreme caution when using this munition. In the powder form, CS is dispersed by means of the M47 hand grenade and by mechanical dispersers:
A protective mask and field clothing protect against the effects ofCS. First aid for CS contamination is rendered by moving affected people to uncontaminated areas, facing them into the wind, and cautioning against rubbing the eyes or touching the genitals or mucous membranes. Showers provide further relief. Affected people should be kept away from each other.
RIOT CONTROL AGENT CHARACTER.STleS AND TREATMeNT
OEUVfAV MeA,.S
EMPLOVMENT
CONDITIONS
PERSISTENCY
TIM E TO MAXIMUM
EFFeCT
DURATION OF
EFFECTS

./
cs CR
O"lilll!rr1n by hilrd !lrcm,""~", "tlf gl4!nadlf!!.
Deli"'ered ..5 • wet spray or str.am by rillH "ir'oi'",lftproject,t,lS. or...dry,p'ilY
M3341 Or M36 (filS,,""!!f by .... J3A1 'H MS d'SIlO'S~'
I,4mecttVV unaWlIlP4;;onC1ItHmS "XCltP' n,gFi wino. eff",cli\l"'n"'~!; !/'''/lII... (Jllnamsh4!d bV
i ... ~"":itrc.~~' '" tiC I ""nlln tJlIU~'I'""" .;""Iff
w.nds. t\'ffec civenest onl\' Slightly d4minilhed bV r.in
'oi'·"
v .....::! ,lccorclInu 0 wooa concan.ons;
Llngeors In elf. Ion!! I.sung.•"" less ""e V POW""" fo,nl ~'P.'~I~'" I,\"!,.,, In $hll b;r "nil
windblown: oJl:tremelv persistent on ill wflocl~tJ terram
surf.ces Is not to btl 11511d in bUlldll'l{tli. nCiI'
l:s not to be used In buildi~$. n~' ho~pll"I•. ro, .n .l,r.Il" \Vhp.l~ hnQf!r,ng
h05pitals. or in ar••s whele linSll4llr"'9 -cDnt~n'il';]tion could clIuse prubloms
eontflmitlluion could ca\I:S~ "robleml
Requires 20 to 60 5p.conris rActs immadf1)tuly 0" eapoRC! .rcus .---.. ILastl I ••w minutes wnen VIClIm lIS mOlHlo
LII'" '" 5 \n t 0 m'I\(lt 9~
. 10 ;In uncolle.mln,ned area

EfFECTS
.
MINIMUM PROTECTION
FIRST AID
lwilUSP." f!.Uf!me ourmt1og !."'"SaIlOn 11\ lAP.
~.\'sus ""UUlon Of nOlI anll tllroat; II vas. ilbunnilnt tlow of Wars. (;oug/l,nq.
stinging 5~ns.lion of ,lin; .nd j"it.tion of b'f!lIthing diffir....It\'. li~htn"!\$ in Chp.~1.
Ul'lIPlfDtOJV systlrm, including coullhing. Involuntllry closing 01 llyn.
5tlnqinu ,..............,-"'........"..

senSlit ion on moist Alli'l ar,"",s••i.,ll!i find 11 !I$oiJ I drop ....nll '1iI1I5r." ani' IIUI1.tll"" 0 .. ."posure tD h,gh COIICP,UJrlt;ons. ~!lIIf!c:iIlIlV Whe,l ;ngeJIf(! I
Req,,"':s prl)lec(iv,,,OMk .. n(1 tl(~h'C'O'h."!1
M"'Vf! vi(,:lItU lu un(;OuI9.,••nAlp.d ar~•. 'J)c~ ",ictim into Wind. Cilution lIict,m not 10 rub ..y.,.~. ""~IJ ,,1It!~:'''ol .,"lll.l" wf!II",'"rl. 1'11"'"' vietim ~howe1 lirsl wilh cool walll' tor J to 5 n,iUII1~$, 11101;",,,.1 wilh ,,,)un",I
Ill"'" ~h"W(jri"o. for orOS5 c;unlilm,"ilt.on. flush h"dy wltl, I""H" "".O..nl~ "I 0:,,(.1 wat"••
'~lIlI'I wash witt .. 5'" ,;odll.m b,su'hlv ~O"Jf;iflU lelCr:f'!IJ( ';11 (UH' ~h"U'lI' .~"'f:t~) .•nd flush again with w;Atl!r·ia 1':. 50lut,on 01
!\c)t! i1.1"" carbOn,He I)' of sodilln, bir.;..tlonau~ may bf ~ub~titutf!d fOl the 5001"'" bl5ulf.1O .schllloni
I'lell""eao protect'\I!t mll.lI. I)OOCI. MId rubber gto".~
-.. .. , .. ­
-,.~.­
.,-~
Mnvp. victim to uncotltl'Mina..d .r••. flll$ll _YOII will) wil18r, ch41ck e."e, ~1..bfitlion5. .Ilo_, well nr walh ."d Icrub eXpOse1 arHS with IMP end w.ter; g.t victim to doctor if r"'.Clion perSi,1$
WARNING:
Housuho'd b'Glch 4.odillrn hV4Oc"lotite solutionIis NOT to be uled in wasil Dr rinn WDtOf to dccontllmlna te cI01hin'll.
4!!qtlipmf!nt. or pftOpif!. CA and hOUMhold bleach ~ac1 to produce a hllnftful \I~por

There are two types ofriot control grenades in the Army inventory, a burning type and a bursting type. In a wind of about 6 miles per hour, a burning-type grenade can cover an area about 5 meters wide to a downwind distance up to 25 meters. At the same wind speed, a bursting-type grenade can cover an area about 10 meters wide to a downwind distance up to 25 meters.
Burning-type CS grenades and agent dispersers are the means usually employed against large crowds. Bursting-type grenades may be used for psychological effect or to discourage crowd members from trying to throw back grenades.
http://atiam.train.anny.millportal/atialadlsc/view/public/296872-l/finI1... -----Ll.....,2/"""2c1.L8/~2..uOO~41--__~
DODDOA-008840
Burning grenades are thrown by hand or delivered by a grenade launcher to the upwind side of the crowd. Burning grenades must not be thrown into a crowd because they can be picked up and thrown back. Bursting grenades are thrown into the air so that they burst several feet above the crowd.
When the control force is in almost direct contact with. the crowd, burning grenades are not used. Either the grenades will be thrown back at the control force or the front ranks of the crowd will be driven into the control force. In this situation, dispersers are used if conditions favor their use behind disturbance control lines.
DISPERSERS
Dispersers provide commanders with a means ofdisseminating riot control agents in sufficient quantities to provide effective coverage in a variety ofsituations and conditions. But their use is limited to outdoor areas. Control force leaders must be careful when employing riot control agents in confined
areas and in areas with restricted avenues of escape. Dispersers usually are transported by soldiers, by 1I4-ton or larger vehicles, or by helicopters. When transported on the ground, the dispersers may be
directly integrated into the crowd control formations. Or they may be operated in direct support of civil
disturbance operations. Helicopter-mounted dispersers are used in close conjunction with the control
force. The exact placement of the aircraft with respect to the formation is determined by current wind
direction and speed and by physical obstacles that may restrict the movement and positioning ofthe
aircraft.
All unit members should know the operation and employment capabilities ofthe riot control agent dispersers. But the unit must depend on specially selected and trained soldiers. The criteria for selecting disperser operators include initiative, ability to learn, and the ability to deal with large numbers of agitated people calmly.
The disperser operator works under the immediate control and direction of an officer or an NCO. Riot control agents are released only on the direct orders ofthe commander. Ifthe commander is not fuHy qualified in employing riot control agents, a qualified officer must be designated to determine the appropriate time, place, and amount ofagent to be released and to issue appropriate commands to the
http://atiam.train.army.mil/portal/atia/adlsc/view/public/296872-1/finlI... .htm 12128/2004
DODDOA-008841
operators.
Disperser operators and dispersal team members must be well qualified in their primary MOS and
thoroughly trained in riot control operations. Preferably, they should receive special training in the use
ofriot control agents.
Riot control agent dispersers can release a large amount ofriot control agent in a very short time.
Operators must be especially careful to avoid releasing intolerable concentrations of the agents. The
operators must determine the average release rate for each disperser in terms ofpounds of the agent
released per second. The dispersers are not used to deliver riot control agents directly into a closed
structure except in extreme circumstances. .
Commands are given the disperser operators by voice or by hand and arm signals. The troop commander maintains radio contact with the officer or NCO who is in command of the crowd control formation or ofthe disperser operators.
Troops who are involved in filling, operating, or transporting dispersers wear ordinary field uniforms with collar and cuffs buttoned and trouser legs tucked into their boots. They also wear a protective mask, a hood, and rubber gloves for protection.
The commander must decide which riot control agent will be used in each disperser before the mission
begins. Wet and dry agents cannot be interchanged in the same disperser during a civil disturbance
mission. Not only must nozzles be changed, but the whole system must be decontaminated before
changing types ofagents. For further information on decontamination procedures, see FM 3-5.
To ensure the dispersers operate properly, operators must perform inspections and maintenance systematically each time the equipment is used. They also service the equipment periodically whether it has been used or not. Because ofthe corrosive effects of some riot control agents, the agents must be removed from the surface ofdispersers and the vehicles or helicopters tha~ dispersed the agents. Detailed maintenance, inspection, and repair instructions can be found in the applicable technical publications.
M36 DISPERSER
The M36 disperser, like other aerosol irritant dispersers, serves as an alternative to traditional weapons, such as nightsticks, riot batons, and firearms. As with other riot control weapons, the M36 must be backed at all times by troops with weapons of greater force.
The M36 disperser is a lightweight, aluminum and plastic container filled with pressurized CR solution. It is small enough to be carried and operated with one hand. To use the M36, the soldier holds the can upright, aims at the person's face, and presses the activator button. The stream of wet CR vaporizes. It causes a temporary, reflexive closing of the eyes, tearing, and a burning sensation on the skin and in the upper respiratory tract.
The most effective way to use the M36 is in one-second bursts. The maximum range is 10 to 12 feet. This allows the soldier to adjust his aim with a minimum waste of the riot control agent. The soldier must not spray a person for more than five seconds when closer than 3feet. After being subdued, the person can best be decontaminated by facing the wind or by generous flushing with water for several minutes. See FM 8-285 for more information on first aid procedures.
Troops using the M36 must be thoroughly trained in the use and hazards ofthe disperser. Training must
http://atiam.train.army.millportallatia/adlsc/view/public/296872-1/ftnI1... .__~J2/28/2004
DODDOA-008842
include situations in which the M36 may be used, how to use it, a demonstration ofthe stream trajectory, safety requirements, and decontamination procedures. Because the use of the M36 does not cause immediate incapacitation, training on tactics and disperser limitations is necessary.
The disperser is carried and stored in a compact vinyl case with a snap button and a belt loop. The ammo pouch may be used as a field expedient carrying case.
M36 EMPLOYMENT AGAINST AN INDIVIDUAL

M33AI DISPERSER
The M33A 1 disperser is a lightweight, portable riot control agent disperser that uses either dry or wet riot control agents. The agent is released through a nozzle on a hand-held gun assembly. Different nozzles are used for the powder and the liquid. The special nozzle for the wet agent allows the operator to vary the amount and range ofthe solution by choosing spray or stream. The operator controls dispersal by varying the pressure on the trigger.
The hose and gun group controls the amount ofriot control agent released. The agent may be released in a continuous stream or spray or in short bursts ranging from less than one second to several seconds. Operators must determine the particular release rate for each disperser that they operate, both for talc and for riot control agents.
Worn as a backpack, the M33Al looks and functions like the portable M33 disperser. The difference lies in the units' capabilities. The M33AI disperser's modular design allows quick replacement ofempty agent and pressure containers. The M3 3A 1 can use either dry or wet agents without having to modify the unit itself. The M33AI is replacing the M33 on a one-for-one basis as the M33s wear out.
The effective use ofthe M33AI depends on a following or slightly quartering wind with a speed ofless than 20 miles per hour. Optimum wind speed is 3 to 5 miles per hour. Usually, the use ofthis disperser is backed up by other dispersers to ensure adequate coverage ofthe target area.
http://atiam.train.army.mil/portallatiaiadlsc/view/publicl296872-1/fmlI9... 12/2812004
DODDOA-008843
M33A1 EMPLOYMENT DISPERSING A WET CR STREAM

M33A1 EMPLOYMENT DISPERSING A DRY CS SPR~
http://atiam.train.army.millportal/atiaiadlsc/view/publicl296872-1/fm/19... 12/28/2004
DODDOA·008844
SOLDIER EQUIPPED WITH M'33A 1
RIOT CONTROL AGENT DISPERSER'

The agent tank and the air pressure bottle both have a quick-disconnect capability. But unless there are sufficient tanks and bottles available, the disperser may be out ofaction for a period oftime, depending on the location of the compressor and the soldiers' ability to reload and repressurize the disperser. Because of its compactness, portability, and low cost, the M33Al provides the user with an immediately available and very effective crowd control weapon.
The disperser operator may be positioned in front of, as a part of, or behind the crowd control fonnation. Proximity to the crowd and the disperser's role determine where the disperser is placed. When riot control agents are employed in advance of a close approach by the crowd control formation, the disperser operator may be a part of, or slightly in front of the formation. These positions give the operator the greatest freedom in using the disperser. It also minimizes troop exposure. Freedom to move right and left may help to disperse a more uniform cloud over the target. It also allows, to a limited extent, coverage over specific sections ofthe target area. Ifthe disperser is to be held in reserve, the operator is positioned from one to several feet behind the center ofthe formation. From this position, the operator can quickly move to the front ofthe formation. When the disperser is not being used, the operator moves behind the formation for protection from thrown objects.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fm!19... 12/28/2004
DODDOA-008845

The optimum distance for firing the disperser to produce the greatest effect depends on the wind speed and the operator's freedom ofmoverilent across the front of the target area. Generally, the distance of the agent release point or line from the target area ranges from 15 meters to 100 meters or more depending on wind speed. As wind speed increases, dilution of the powder becomes more rapid. When this occurs, the distance between the target area and the release point must be reduced to place an effective concentration on the target.
Factors that affect the amount ofa particular agent needed to produce an effective concentration are too varied to permit exact guidance. However, the operator must understand the agent's effectiveness, the amount that can be released in a given time, and the makeup and determination of the crowd. The operator also must closely observe the agent's dispersal pattern and effect on the target. Too heavy a concentration may result in reaching a tolerance inconsistent with objectives. Too weak a concentration, particularly against an organized and determined group, may encourage more violence.
M5 DISPERSER
The M5 riot control agent disperser consists of an M9 portable disperser gun for vehicles or a delivery hose for helicopters, a tank that holds approximately 50 pounds ofCS, a hose assembly, a pressure tank, and a pressure regulator. These components are mounted on a tubular frame. The complete unit measures approximately 4 feet by 2.5 feet by 2 feet.
http://atiam.train.army.miliportaliatiaiadlsc/view/public/296872-1/frn11... 12/2812004

M5 RIOT CONTROL AGENT DISPERSER
AGENT,TANK'
",
TUIULAR ALUMINUM ' FRAME WITH FITTINOS AND HOLD·DOWN STRAPS
12·'OOT'OISCtfAAG.,HOS., " (Mit PORTABLE '''RITANT ' GUN WITH 12·FOOT "OlE
ALSO SU~PUI!D)
The M5 disperser has an effective range of 12 meters when dispersed with the M9 gun'during calm winds. It is effective to 46 meters when dispersed from a helicopter at an absolute altitude of24 to 30 meters. The duration offire per fill is two minutes with the M9 gun and 20 seconds with the helicopter delivery hose. The disperser plus the agent weighs approximately 210 pounds. The M5 disperser can be mounted on a helicopter or on a 1/4-ton or larger vehicle. See TM 3-1040-220-12& P for more information.
The M5 disperser provides an air-to-ground dispersal capability when mounted in a helicopter. Situations best suited for the employment ofthe helicopter-mounted M5 include large-scale civil disturbances requiring large quantities of riot control agents and conditions that prevent its use on the ground.
When a helicopter is used, the agent can be released from either a hovering position above or on the windward side ofthe target area or along a line above or on the windward side of the target. When mounted on a vehicle and employed against open-area targets, the disperser is operated from positions slightly in front ofor in the crowd control formation.
The release of riot control agents from a helicopter must be far enough in front of the crowd control formation that the agent dissipates shortly before the formation arrives. The location of the release point or line with respect to the target is determined by wind speed and direction and by physical obstacles. Other factors include the effects ofthe rotor wash on dispersal and the ground speed ofthe helicopter.
Initial release of the agent when hovering over the target is accomplished in short bursts of three to five seconds duration. The operator watches the crowd's reactions to determine the number and length of subsequent bursts. When hovering to the wiridward side ofthe target, the same procedure is followed, except the agent may be released in slightly longer bursts. Release of an agent along a line must begin in
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fm/19... 12128/2004
DODDOA·008847
time to assure coverage ofthe ,ide of the target being approached. Dispersal must cease shortly before reaching the far side ofthe target. This helps avoid dispersal over areas other than the target. The exact moments for beginning and for ceasing the release are governed by the helicopter's speed and by wind
speed and direction. Operating dispersers from a helicopter while it is hovering or flying at speeds less than effective translational lift speed when in ground effect may contaminate the helicopter, the crew, and the occupants due to circulation ofthe agent in the rotor wash. Therefore, either the pilot or the co­pilot must wear a protective mask.
The agent may be released from one or more stationary ground positions or along a line on the windward side ofthe target. When released from a stationary point, the agent is dispersed in intermittent bursts as the gun muzzle is swung through an approximate y 1600 arc to the front. When dispersed along a line, the agent may be released continuously or intermittently, depending on the agent used, the rate of movement, and the wind factors.
Commanders and disperser operators must ensure that the target area is not covered with an intolerable concentration of riot control agents. This is particularly true when the wind lies calm and when the target area is partially enclosed by buildings. Also, the operator must remember that 1 pound ofCS is the equivalent of five bursting-type CS grenades and, further, that 50 pounds of CS can be released in two minutes or less with the M5.
. .
The M9 gun group is used when mounted with the M5 on a vehicle. The M9 permits close control ofthe amounts of agent released. Operators must determine the release rate for each disperser that they operate.
Each M5 dispersal team has three members: a commander who is an officer, an operator who is an NCO, and an assistant operator. Inclusion ofthe vehicle driver the helicopter pilot as a member ofthe team is desirable, but not mandatory.
http://atiam.train.army.mil/portallatiaiadlsc/view/publicl296872-1/fm/19... 12/28/2004 ___
DUTIES OF M5 DISPERSAL TEAM
TEAM COMMANDER • Supervises operation. employment, lind m.intenance of the M5 diape,.er. • Reconnoiters t.rget .re8 and prepare. em~lovment pl.n•. • Supervi." mOt/lI....nt of equipment to operation .ite and alligns ,oldiers to specific job •. o Select. the , ...... point or line. • Controls the amount ofriot control 8gent rele.sed. • Ob••,v.. and evalu.t..di.p....d agent to enlur. proper covarage and concentrations without int.rfering witt. the control forea's mission. • Teache. or demon.tr.tes operating technique. and plecedures. • SuperviHl .nd conducts te.m tr.ining. • Super"i_s the prep.,ation of records .nd reports related to tbe diepeq.r's operation.
OPERATOR AND ASSISTANT OPERATOR • Opa,ata and ....int.in the di.pe,.ar. • Oper.te and adjust the dispet'ser to get the best possible control agent di.pe,..1 pettern. • Irvpact and tNt defective equipment or components to delerm;ne types and causes of m.lfunction, extent of repairs needed, and quality of repair woril performed. • Ct.n. make minor adjustments, and replace detective parts using common hand tools. o Make finaladj ...tments to equipment for O!)timum operation. • E.timate need. for maintenance .upplies.

\-VATER
When using water, a number of factors must be considered. The Army does not have a water-dispersing system that is specifically designed for use in civil disturbance operations. Such a system can be improvised from existing equipment. The use of a large water tank--750 to 1,000 gallons--and a powerful water pump mounted on a truck with a high-pressure hose and a nozzle capable ofsearching and traversing enables troops to employ water as they advance. By having at least two such water trucks, one can be kept in reserve.
Employing water as a high-trajectory weapon, like rainfall, is highly effective during cold weather. When using water, as with other measures of force, certain restraints must be applied. Troops try to avoid using water on innocent bystanders like women and children. When water is used, the troops must
http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-1/fm1l9... .htm 12/28/2004
DODDOA-008849

provide the crowd with escape routes. Troops employing water must be protected by formations and, in some instances, by shields. The more severe use ofwater, the flat trajectory application, is employed only when necessary. Because fire departments are associated with saving lives and property rather than maintaining law and order,jire department equipment must not be used/or crowd control and dispersal.
http://atiam.train.anny.millportallatialadlsc/view/pub1ic/296872-1 /finIl9-15ICH9.htm 12/28/2004
CHAPTER 10
Riot Batons
The riot baton is an invaluable weapon in crowd control situations. Except for extremely violent crowds, the baton in the hands of well-trained troops is the most appropriate weapon. The riot baton is not meant to replace the rifle as the main weapon used by control forces. Rather, the riot baton is used in situations in which the rifle is not needed. The presence ofrifles, with or without bayonets, tends to escalate the intensity of a c~vil disturbance. And unlike the rifle, the loss ofa baton to the crowd does not present a serious threat.
Most control forces are armed with riot batons. This very versatile offensive weapon can be from 26 to
42 inches long: But the optimum length is 36 inches. The baton is made from any dense hardwood like
rosewood or walnut that does not shatter or break easily. Both ends of the b.aton are rounded to prevent
unnecessary injury. The suggested diameter ofthe baton is 1.25 inches. A hole is drilled 9 inches from
the grip end. The wrist thong is inserted through the hole. Either one or both ends of the baton should
have a series of rounded ridges to aid gripping.
EMPLOYMENT
The use ofthe baton is based on the commander's appraisal of the situation and his choice ofa force
option. Units committed with the baton must have marksmen and riot control agent teams in direct
support. Ifthe confrontation is intense, the coinmander also may elect to have reserve forces with rifles
or shotguns, with or without bayonets, positioned for rapid reinforcement.
The riot baton is used by units that are employed defensively to protect people and property. During the
termination phase ofthe disturbance when the violence has subsided and is expected to stay that way,
troops are in a defensive posture. They may be equipped with the riot baton to perform their tasks.
The riot baton can be used in offensive crowd control formations. It can be employed so that the unit confronting the crowd is equipped with rifles and bayonets. Or it can be employed so that the element in direct contact with the crowd is equipped with batons, and the supporting element is equipped with rifles and bayonets.
The riot baton is never the only weapon available to control forces. An element deployed with riot batons must have a marksman as a precaution against snipers. Reserve forces with rifles and bayonets must be available for immediate employment. The commander must be able to withdraw the riot baton
elements, issue them other weapons, and redeploy them as a ready reserve force.
The riot baton, in the hands oftrained troops, is a formidable weapon. But it must be used in conjunction with other measures to be most effective. The soldier who is skillful in using the riot baton can adequately cope with most situations that require physical restraint. Troops must be trained with the riot baton to the point that they use the various techniques automatically.
Troops using-riot batons must have a thorough knowledge ofthe vulnerable points on the human body. Troops must deter, discourage, or disperse individuals threatening their position. But they must try to avoid blows that could kill or permanently injure.
When deployed, troops usually avoid any riot baton techniques that could result in death or permanent
http://atiam.train.army.miliportallatia/adlsc/view/public/296872-1/fmJI9... 12/28/2004
DODDOA-008851
injury. The riot baton is never raised above the head to strike an adversary in club fashion. Not only is this likely to cause permanent injury, it also projects an unfavorable image ofthe control force. Also, the soldier is vulnerable to an attack on his rib cage when his ann is raised.
VULNERABLE BODY POINTS
FRONT OF BODY REAR OF BODY
1 ABOVE CLAVICLE 16 BEHIND SCAPULA 2 SHOULDER 17 KIDNEY 3 OUTER BICEP 18 COCCYX 4 RISS 19 SEHIND KNEE is SOLAR PLEXUS 20 CALF MUSCLE 6 INNER ELBOW 21 ANKLE TENDON 7 FOREARM 22 ANKLE lONE 8 HAND 9 GROIN
10 THIGH
11 KNEECAP
12 SIDE OF CALF
13 SHIN
14 ANKLE FRONT
15 TOES

http://atiam.train.anny.millportallatiaiadlsc/view/public/296872-1/fm119... 12/2812004 .
FATAL IMPACT POINTS
A HEAD
B SIDE OF NECK
C THROAT
o HEART AREA
E ARMPIT

http://atiam.train.anny.millportallatiaJadlsciview/publicl296872-I/finIl... 12/28/2004 ___
BATON GRIP AND POSITIONS
Three steps are necessary to obtain a secure grip on the riot baton. First, the thong ofthe baton is placed around the right thumb. Then the baton is held so the thong hangs over the back ofthe hand. Finally, the hand is rolled into the baton handle so that the thong is pressed into the palm ofthe hand. This method ofgripping the baton provides a secure grasp. The baton can be released quickly by simply relaxing the hand.
http://atiam.train.army.millportallatialadlsc/view/public/296872-l/fin/1... 10.htm 12128/2004
~~---­
DODDOA-008854
PARADE-REST POSITION
Parade rest is the relaxed ready position. The feet are shoulder width apart. The left palm is facing out. The right palm is facing in toward the body. The hands are approximately 6 inches from the ends of the baton.
PORT POSITION
The port position is a ready position. It is particularly well suited for individual defense. The right hand
http://atiarn.train.anny.millportallatialadlsc/view/publicl296872-1 /fin!l9-15/CH 1 O.htrn ___ 12/28/2004
DODDOA-008855
and forearm are parallel to the ground. The left hand is level with the left shoulder. The striking end of the baton bisects the angle between the neck and the left shoulder. The baton is held approximately 8 inches from the body. The feet are shoulder width apart .
-.. . 1

ON-GUARD POSITION
The on-guard position is the ready position. It should not be maintained for long periods of time because it is tiring. To assume the position, the left foot is placed forward ofthe right foot. The feet are spread apart, and the knees are slightly bent. The right hand and the butt end of the baton are placed snugly against the hip. The body is bent slightly forward at the waist. The left arm is bent so that the forearm protects the soldier's throat area, yet allows a thrust to be made.
OFFENSIVE TECHNIQUES
Control forces use one of four techniques when employing riot batons in offensive operations. They
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/finI1... 12/28/2004
DODDOA-008856
perform the short thrust, the long thrust, the butt stroke, or the baton smash.
SHORT THRUST
The short thrust is made from the on-guard position. The body is thrust forward rapidly by advancing the left foot. The left arm is snapped straight, driving the striking end of the baton into a selected vulnerable point of the opponent's body. The soldier must never direct the thrust directly at the central throat area because it can cause permanent injury or death. The soldier returns to the on-guard position after delivering the short thrust.
.LONG THRUST
The long thrust is made from the onguard position. The body is thrust rapidly forward by advancing the right foot. The baton is held in the right hand. The baton is snapped forward, driving the striking end of
th
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/fml19... 12/28/2004
DODDOA-008857
CHAPTER 10
Riot Batons
The riot baton is an invaluable weapon in crowd control situations. Except for extremely violent crowds, the baton in the hands of well-trained troops is the most appropriate weapon. The riot baton is not meant to replace the rifle as the main weapon used by control forces. Rather, the riot baton is used in situations in which the rifle is not needed. The presence ofrifles, with or without bayonets, tends to escalate the intensity of a civil disturbance. And unlike the rifle, the loss of a baton to the crowd does not present a serious threat.
Most control forces are armed with riot batons. This very versatile offensive weapon can be from 26 to
42 inches long. But the optimum length is 36 inches. The baton is made froM any dense hardwood like
rosewood or walnut that does not shatter or break easily. Both ends ofthe baton are rounded to prevent
unnecessary injury. The suggested diameter ofthe baton is 1.25 inches. A hole is drilled 9 inches from
the grip end. The wrist thong is inserted through the hole. Either one or both ends of the baton should
have a series of rounded ridges to aid gripping.
E\IPLOYMENT
The use ofthe baton is based on the commander's appraisal ofthe situation and his choice of a force
option. Units committed with the baton must have marksmen and riot control agent teams in direct
support. If the confrontation is intense, the coriunander also may elect to have reserVe forces with rifles or shotguns, with or without bayonets, positioned for rapid reinforcement.
The riot baton is used by units that are employed defensively to protect people and property. During the tennination phase of the disturbance when the violence has subsided and is expected to stay that way, troops are in a defensive posture. They may be equipped with the riot baton to perfonn their tasks.
The riot baton can be used in offensive crowd control fonnations. It can be employed so that the unit confronting the crowd is equipped with rifles and bayonets. Or it can be employed so that the element in direct contact with the crowd is equipped with batons, and the supporting element is equipped with rifles and bayonets.
The riot baton is never the only weapon available to control forces. An element deployed with riot batons must have a marksman as a precaution against snipers. Reserve forces with rifles and bayonets must be available for immediate employment. The commander must be able to withdraw the riot baton elements, issue them other weapons, and redeploy them as a ready reserve force.
The riot baton, in the hands oftrained troops, is a fonnidable weapon. But it must be used in conjunction with other measures to be niost effective. The soldier who is skillful in using the riot baton can adequately cope with most situations that require physical restraint. Troops must be trained with the riot baton to the point that they use the various techniques automatically.
Troops using riot batons must have a thorough knowledge ofthe vulnerable points on the human body. Troops must deter, discourage, or disperse individuals threatening their position. But they must try to avoid blows that could kill or pennanently injure.
When deployed, troops usually avoid any riot baton techniques that could result in death or pennanent
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fml19... 12/28/2004
DODDOA-008858
injury. The riot baton is never raised above the head to strike ari adversary in club fashion. Not only is this· likely to cause pennanent injury, it also projects an unfavorable image of the control force. Also, the soldier is vulnerable to an attack on his rib cage when his arm is raised.

1
2
3
4 5 6
7 8
9 10 11 12 13 14 15
VULNERABLE BODY POINTS

FRONT OF BODV
ABOVE CLAVICLE SHOULDER OUTER BICEP RIBS SOLAR PLEXUS INNER ElBOW FOREARM HAND GROIN THIGH KNEECAP SIDE OF CALF SHIN ANKLE FRONT TOES
REAR OF BOOY
16 BEHIND SCAPULA 17 KIDNEY 18 COCCYX 19 BEHIND KNEE 20 CALF MUSCLE 21 ANKLE TENDON 22 ANKLE BONE
http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/fm119... 12/2812004
FATAL IMPACT POINTS
A HEAD B SIDE OF NECK C THROAT
o HEART AREA
E ARMPIT

http://atiam.train.anny.millportal/atiaJadlsc/view/public/296872-1/frn/1... 12/28/2004
BATON GRIP AND POSITIONS
Three steps are necessary to obtain a secure grip on the riot baton. First, the thong of the baton is' placed around the right thumb. Then the baton is held so the thong hangs over the back of the hand. Finally, the hand is rolled into the baton handle so that the thongis pressed into the palm ofthe hand. This method of gripping the baton provides a secure grasp. The baton can be released quickly by simply relaxing the hand.
http://atiam.train.army.millportal/atialadlsc/view/publicl296872-1 Ifml19-151CHI O.htm 12/28/2004
DODDOA-008861
~
J. '~'. ~
4/Y '.
• f
"'"
PARADE-REST POSITION
Parade rest is the relaxed ready position. The feet are shoulder width apart. The left palm is facing out. The right palm is facing in toward the body. The hands are approximately 6 inches from the ends ofthe baton.
PORT POSITION
The port position is a ready position. It is particularly well suited for individual defense. The right hand
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-I/fiw'19-IS/CH 1 O.htm 12/28/2004
DODDOA-008862
and forearm are parallel to the ground. The left hand is level with the left shoulder. The striking end of the baton bisects the angle between the neck and the left shoulder.' The baton is held approximately 8 inches from the body. The feet are shoulder width apart.
ON-GUARD POSITION
The on-guard position is the ready position. It should not be maintained for long periods oftime because it is tiring. To assume the position, the left foot is placed forward of the right foot. The feet are spread apart, and the knees are slightly bent. The right hand and the butt end ofthe baton are placed snugly against the hip. The body is bent slightly forward at the waist. The left arm is bent so that the forearm protects the soldier's throat area, yet allows a thrust to be made.
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-l/fmlI9... 12/2812004 http://atiam.train.army.miliportaliatiaiadlsc/view/public/296872-1/fin/1...
OFFENSIVE TECHNIQUES
Control forces use one of four techniques when employing riot batons in offensive operations. They perfonn the short thrust, the long thrust, the butt stroke, or the baton smash.
SHORT.THRUST
The short thrust is made from the on-guard position. The body is thrust forward rapidly by advancing the left foot. The left arm is snapped straight, driving the striking end of the baton into a selected vulnerable point of the opponent's body. The soldier must never direct the thrust directly at the central throat area because it can cause penn anent injury or death. The soldier returns to the on-guard position after delivering the short thrust.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm119... 12128/2004
. ":'. ; .~
LONG THRUST
The long thrust is made from the onguard position. The body is thrust rapidly forward by advancing the right foot. The baton is held in the right hand. The baton is snapped forward, driving the striking end of the weapon into a vulnerable point ofthe opponent's body. The soldier returns to the on-guard position after delivering the long thrust.
http://atiam.train.army.millportallatiahldlsc/view/public/296872-I/finI1... 12/28/2004
DODDOA-008866
.....
.
BUTT STROKE
The butt stroke is delivered from the on-guard position. The right hand is elevated until the baton is almost parallel to the ground. The butt stroke is made by advancing the body rapidly off the right foot. The right arm is snapped straight. The butt end of the baton is driven to the left, striking the opponent's shoulder, chest, or jaw. The left hand is kept even with the left shoulder. The butt stroke may be fatal to the opponent if either the side of the neck or the head is struck. After delivering the butt stroke, the soldier returns to the on guard position.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-I/fml19... __lP28/200L_
DODDOA-008867
BATON SMASH
The baton smash can be delivered from the parade-rest, the port, or the on-guard positions. The baton is

http://atiam.train.army.millportal/atialadlsc/view/public/296872-1/fm/19... 10 .htm 12/28/2004
DODDOA-008868
held horizontal to the ground, approximately chest high. The smash is executed by advancing the left foot rapidly. Both arms are snapped straight, smashing the length 'of the baton across the opponent's chest. After delivering the smash, the soldier returns to the on-guard position.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fmlI9... 12/2812004
DEFENSIVE TECHNIQUES

In some situations, troops may have to employ the riot baton to defend themselves. They may have to defend against anned or unanned attackers. The defensive techniques enable troops to defend against blows to the head, jabs to the body, stabs, and hand holds.
DEFENSE AGAINST BLOWS TO THE HEAD
To defend against a blow to the left side of the head, the soldier starts from the parade-rest, port, or on­guard position. He smartly snaps the left hand to the left side ofthe body and the right hand up and to the left. The baton is then in a nearly vertical position that blocks the opponent's blow.
Immediately after blocking the opponent's blow, the soldier snaps both anns up and level with the baton. The left hand is near the left shoulder, and the right hand is in front ofthe left shoulder. The grip end of the baton is pointing towards the opponent. The soldier is now in position to execute a jab or a smash. The body is driven forward. The right hand is snapped straight, driving the grip end of the baton into the opponent's upper body, avoiding the head. After delivering the jab or smash, the soldier returns to the on-guard position.

---"

http://atiam.train.anny.mil/portallatiaiadlsc/view/public/296872-lIfm119....... 12/2812004
DODDOA-008870
i..
..
,­
..
~f
'" '. . .
.'. t'
4­
"C., ;,
DEFENSE AGAINST BACKHAND BLOWS
An opponent's backhand blow can be blocked from the parade-rest, port, or on-guard position. Both arms are snapped out and to the right front of the body. The left hand is raised above the right hand so that the grip end of the baton is pointing down. This position blocks the opponent's blow. After blocking the opponent's blow, the right hand is brought up near the right shoulder. The left hand is moved down
http://atiam.train.army.millportallatia/adlsc/view/publicl296872-I/finIl... 12L?5U200.:1
DODDOA-008871
and to the front ofthe chest. The striking end of the baton should be pointing slightly to the left "front and toward the opponent. The soldier is now in position to execute the butt stroke. The body is rapidly· advanced off the right foot. The right hand is driven forward and to the left. The left hand is held in place as the baton is driven against the opponent's shoulder, chest, or jaw. This blow can result in a fatal injury ifany other area ofthe head is struck.
http://atiam.train.anny.millportallatiahtdlsc/view/public/296872-1/finIl... ~~~2/28/2004 http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/finlI... 12/28/2004 .

DEFENSE AGAINST THE LONG THRUST
The long thrust can be countered from the parade-rest, port, or on-guard position. The left hand is moved toward the left. The right hand is moved smartly down and toward the left. The opponent's weapon is engaged and deflected to the left and away from the body. As soon as the opponent's weapon has been deflected, allow the left hand to slide down to the right hand. The body and baton are now in position for a counterblow against a vulnerable point.

http://atiam.train.army.millporta1Jatiaiadlsclview/public/296872-lIfin11... 12/28/2004
DEFENSE AGAINST STABS OVERHEAD
This defensive technique can best be accomplished from the parade-rest, port, or on-guard position. As the opponent stabs down, the body is moved to the rear by withdrawing the left foot. The left hand is allowed to slide down the baton to the right hand, and the baton is raised up over the left side ofthe body. The baton is brought down and snapped against the opponent's wrist or forearm, disarming him. After disanning the opponent, the left hand is slid back up to its original position on the baton, ready to execute the baton smash.
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1/fml19... 12/28/2004
DEFENSE AGAINST THE UPWARD THRUST
The upward thrust can be blocked effectively from the parade-rest, port, or on-guard position. The riot baton is brought quickly to a position parallel to the ground, about 6 inches away from the lower chest. Both arms are snapped straight down, driving the length of the baton downward to strike the opponent's wrist. As the opponent drops his weapon, the soldier brings both hands up close to his shoulders. The baton is held across the chest. The counterblow is delivered by moving forward with the right foot and executing the baton smash.
,.
.~
.4 -.
_oP ..
http://atiam.train.army.millportal/atiaiadlsc/view/public/296872-1Ifm119... 12/2812004
DODDOA·008876

Once an opponent has been disanned, he must not be allowed to recover his weapon. Any blow delivered to a vulnerable point of the body is effective.

DEFENSE AGAINST AN UNARMED ATTACKER
The riot baton is extremely effective when used against an aggressive or violent person. These defensive tactics may be performed from all three basic positions. The body is moved slightly to the rear by withdrawing the left foot. The left hand is slid down the riot baton to the right hand, and both hands are
http://atiam.train.army.millportal/atiaJadlsc/view/public/296872-lIfm119... 12/28/2004
DODDOA-008877
brought up to the left shoulder, the baton parallel to the ground. Against an opponent's left-handed blow, the soldier delivers a counterblow to the opponent's collar bone or shoulder. Against an opponent's right­handed blow, the soldier delivers a counterblow to the opponent's foreann.
If a soldier is grabbed by an opponent, the baton can be effectively employed as a defensive weapon. The baton can be jabbed into the groin or stomach ofthe opponent.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/finI1... ~__ t~28/20QL
DODDOA-008878

http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-lIfin11... 12/28/2004
DODDOA-008879
CHAPTER 11
Extreme Force Options
When a crowd engages in violent activities, a control force may have to 'fesort to forceful measures to control the crowd. Strong measures of force are used only against crowds who employ defenses, arms, or tactics that make lesser measures of force ineffective or impractical. These measures include the use of firearms, the most extreme measure of force. The use of firearms ranges from the M234, which is a nondeadly force measure, to the machine gun, which is the most deadly force measure. The commander employs these firearms in a manner that is consistent with the principle of using minimum force. When employing firearms, way that the commander tries to ensure that they are used in a minimizes the chances for fatalities.
RING AIRFOIL SYSTEM
The M234 launcher is a riot control weapon that uses nondeadly force. The launcher, mounted on the M16 rifle, fires a projectile that causes pain on impact. The force of the projectile's impact repels or distracts rioters while causing minimal injuries.

RECOIL MECHANISM PROJECTILE LAUNCHING
BUFFER CUP
The ring airfoil projectile is shaped like a ring or doughnut. It is 2.5 inches in diameter. It consists of a one-piece, molded rubber body weighing approximately 1.25 ounces. The projectile is available in two variations: the soft projectile and the sting projectile. Both are identical in their external appearance. The sting projectile is a kinetic energy projectile that inflicts a painful blow. The soft projectile is identical to the sting projectile, but it contains riot control agent powder in small compartments in the projectile's body. On impact, the powder is spread directly on the person.
The M234 launcher is mounted on the closed-end flash suppressor ofthe M16 (ifso equipped) or on the M16A 1 rifle. An upper arm and a buffer housing on the rear of the launcher mate with the rifle's forward sight and bayonet stud to keep the launcher from moving on the barrel. The launcher is aimed using the launcher sights. The rifle is fired in the usual manner. The speed and flat trajectory of the spinning projectile make it extremely difficult to dodge, catch, or deflect.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-l/fmlI9... 12/28/2004
DODDOA-008880
The firing rate is about four to six projectiles per minute. The maximum range is 100 meters, but the . weapon works best against individuals at ranges to 40 meters and against small groups to 60 meters. It is most effective when the person is lightly clothed. .

EMPLOYMENT
The M234 launcher is issued two per squad for each authorized company. The weapons may be deployed in several ways. Soldiers armed with the launcher may be used as members of foot or motor patrols. They also may be placed in or behind a crowd control formation. They must be positioned behind other squad members because they are vulnerable and make likely targets. Also, they must be positioned where they can easily hear the squad leader and fire team leader and react quickly to calls for fire support.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-lIfm119-1 S/CH 11.htm 12/28/2004
M234 LAUNCHER POSITIONS FOR EMPLOYING RING AIRFOIL

PROJECTilES
1ST . 4TH I
I.. I..
SQUAD • SQUAD ..
®®@CD®0000CDCD®CDCD®®_

0 @L8J @ [ZJ 0 @ C8J @G) I
. ~@0 • 0@~

T
20 (;'\ SQUAD \!Igs® ~ 8~0 0 (;'\ 3D\V SQUAD®as
@_® C2J t8:l @®
LEGEND:

8" MESSENGER/RADIO OPERATOR +C8J PLATOON SERGEANT 8 SELECTED MARKSMAN G DISPERSER Q SQUAD MEMBER WITH M234 LAUNCHER
[Z] FIRE TEAM LEADER OR ASSISTANT SQUAD LEADER IZI SQUAD LEADER
• PLATOON LEADER
The soft projectile produces a CS agent cloud 4 to 5 feet in diameter. It is specifically designed to provide the commander with a less lethal means of engaging specific people or small groups under conditions in which other riot control weapons would be prohibited, undesirable, or ineffective. Ball ammunition is used only in extreme circumstances. Dispersing greater amounts ofa riot control agent by other means is often undesirable or not possible. The soft projectile may be particularly useful against individuals or groups who are highly motivated, are wearing heavy clothing, or are using protective gear or shields.
The sting projectile produces a sharp stinging blow on impact. Through its painful effects, it repels, deters, or distracts crowd members. The sting projectile is employed in essentially the same way as the soft projectile. Whether the soft or the sting projectile is employed in a given situation is largely a judgmental decision. The sudden and painful impact ofthe sting projectile is particularly effective when used against lightly clothed people or people wearing masks that protect against the effects of the soft projectile. Against small area targets, employing soft and sting projectiles in combination can be highly effective. Troops must be very careful with the sting projectile. They must avoid accidental shots that can hit windows, streetlights, or other fragile structures. The sting projectile can easily break ordinary windows and may crack heavier glass like that used on store fronts.
http://atiam.train.army.millportallatiaJadlsc!view/publicl296872-1/fm/19... 12/28/2004
DODDOA-008882
Troops using M234 launchers also may be a part of security elements protecting critical facilities. Their positioning depends on the shape and physical limitations of the periineter barrier. Whenever M234
firers are used, other members of the unit must be equipped with lethal firearms.
Use of the M234 must be controlled at all times. In crowd control formations, authority to fire the M234 launcher is retained at the platoon or company level. In a patrol or a security element, that authority belongs to the person in charge. Its use must be limited to people who pose a serious threat to security forces Or critical facilities or to people who are bent on violence or destruction. Any other use may incite more violence and destruction, thus promoting sympathy for the participants.
FIRING TECHNIQUES
Firing techniques for the M234 launcher include selective, volley, and combination fires. Selective fire
employs fire aimed at point targets. For greatest effect, the projectile should hit the front, upper half of the torso. To prevent eye damage, the soldier avoids aiming directly at a person's head.
Volley fire is used against area targets to cover as much of an area as possible. Volley fire must be restricted to situations in which serious destruction of property could occur or life is at stake.
Combination fire is the joint use of the M234 and riot control agents. It capitalizes on the incapacitating effects of agents and the shock of M234 projectiles. Combination fire is used against attacks by determined groups of rioters.
Although the M234 is designed to keep injuries light, misuse of the weapon can cause permanent injury. Follow these precautions:
• Take special care to avoid accidental use of ball ammunition.
• Ball ammunition must not be issued to soldiers using the M234.
•
Avoid, if possible, using launchers for volley firing. An M16 firing blank ammunition sounds the
same as it does when firing ball ammunition. To prevent panic and unfavorable crowd reaction,
wait until the crowd realizes blank ammunition is being used. Then the launchers may be fired in
greater numbers. .

•
Do not use the M234 launcher for indiscriminate or harassing firing.

•
Do not fire at older people, pregnant women, or children.

•
Do not aim at the head or the neck. The projectile's speed gives it enough force to severely
damage an eye.

•
Take every precaution to ensure a stray projectile does not hit an onlooker or the FM 19-15
property of residents. Not only can the projectile cause pain, it also can damage windows,
streetlights, or other fragile structures.

•
Give annual training to all members of units using the M234. Training must include related
equipment and the disassembly, assembly, and use of the launcher.

SHOTGUNS
The riot shotgun is an extremely versatile weapon. Its appearance and capability have a strong psychological effect on rioters. It is particularly suited to certain applications in civil disturbance operations. When used with No. 00 buckshot, it is effective at a limited range. However, the use of No. 00 buckshot should be limited to specific missions. For example, it is ideally suited for use as a "covering" weapon in the anti sniper role, during room-to-room searches, and at critical static posts that could be penetrated by a high-speed vehicle. By varying the ammunition from No. 00 to No.7 1/2 or
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm119... 12/28/2004
DODDOA-008883
No.9 birdshot, the shotgun can be used with considerably less possibility of serious injury or death. This gives the commander flexibility in choosing the ammunition that is most appropriate for the existing conditions.
When using No. 7 112 or No.9 shot, the riot shotgun is suited to close-in firing against isolated targets like those encountered in anti sniper operations. Because of the shotgun's short range, the danger of producing accidental casualties at ranges over 60 to 70 meters is much less than other types of weapons. However, the high lethality potential of the shotgun at shorter ranges places a severe restraint on its use during civil disturbance operations. The use ofNo. 00 buckshot, because of its high lethality at ranges beyond 100 meters, must be limited during civil disturbance operations.
Regardless of the type of shot used, the shotgun, like any other firearm, constitutes a deadly force that can be used only pursuant to the provisions of the rules on the use of deadly force. Positive control measures must be established to ensure that when shotguns are used, the commander specifically designates the type ofammunition to be used, and the troops armed with shotguns use only that type of ammunition.
RIFLES
The rifle is the primary individual weapon used in civil disturbance operations. The exception is crowd control operations. The primary weapon for crowd control is the riot baton. The rifle also may be used for antisniper operations.
When arming his troops with rifles, the commander may, in keeping with the principle of minimum force, select from several options. The options consist of various combinations of the rifle, the bayonet, the magazine, and the rifle's chamber. Each option represents an escalation in the level of force. The options are not sequential in the sense that a commander must start with the first option and proceed from one option to the next in order. As long as the option that he chooses is appropriate for the threat, he is in keeping with the principle of minimum force.
RIFLE READINESS OPTIONS
•
RIFt.E
.'pan
BAYONET find MAGAZtNI:
I in_a...
CHAM8ER fOUnd in place

RIFlf: It sling BAYOIIIET
,n scabbard MAGAZINE
In 1)(llJch or on
bell CHAMBER
emprv
RIFLE et port BAYONET in selbblfd MAGAZINE
in I)G\Ich or on
beh CHAMBER
empty
RIRE
et perf BAYONET
"xed MAGAZINE
in peuch or on belt
CHAMBER empty
RIFLE at pori BAYONET filled MAGAZINE
in_apOll
CHAMBER emplY
The rifle and the rifle with bayonet affixed have very limited offensive use in civil disturbances as both
can constitute deadly force. The main value of the rifle with bayonet affixed is its psychological impact
on a crowd. However, the danger of accidental or intentional injury to demonstrators or other control
force members precludes the use of fixed bayonets except against extremely violent crowds. The rifle
with a round in the chamber is an option that usually is reserved for the commander of selected marksmen, such as an SRT leader.
The troops fix bayonets only on orders. The order to lock and load rifles can only be given when the
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fmJI9... 12128/2004 .
DODDOA-008884
criteria for the use ofdeadly force have been met. When the M16 rifle is used, a lock plate must be installed to prevent automatic fire. The lock plate, a prefabricated insert, fits between the pistol grip and the receiver group. It prevents the selector switch from being inadvertently flipped to the automatic mode. A soldier can install the lock plate in less than a minute using only a screwdriver. Once in place, it ensures that the selector switch stays in the semiautomatic mode.
MACHINE GUNS
All automatic weapons, especially machine guns, are closely controlled by the task force commander. It is almost inconceivable that machine guns would be used, short of guerilla warfare. Only the most drastic circumstances would justify their use. Individual automatic weapons must be modified so that they only fire semiautomatically ..
Al'tomatic weapons larger than 7.62 millimeter are not taken on a civil disturbance mission. They usually are not needed or used. If a need develops, they can be obtained later.
Machine guns, 7.62 millimeter and below, may accompany units on civil disturbance missions. They are not taken-on operations unless their use is imminent. Machine guns are available to the control force, but they are kept in a secure area.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm119... 12/28/2004
CHAPTER 12
Apprehension and Detention Operations
During civil disturbances many people engage in unlawful behavior. The control force may be called upon to take into custody crowd members who have broken the law. Apprehension and detention operations are conducted to halt illegal acts and to deter future disorders. All apprehensions are made by the civil police force unless it is not possible for them to do so. If it becomes necessary for a military control force to apprehend ?r temporarily detain such lawbreakers, the offenders are turned over to the civil authorities at the earliest possible moment. Apprehension is justified only for a person who breaks the law. The person must be known to have committed an illegal act, or there must be "probable cause" to believe he or she has done so. When possible, the military limits its concerns to serious offenses involving injury or death.
When the military must detain or apprehend violators, certain policies must be observed. Apprehended people must be treated firmly, but with reasonable courtesy and dignity. The attitude and behavior of the apprehending officials is very important. Treating offenders with contempt, hostility, or excessive force increases the likelihood of resistance. And apprehending people without probable cause or without concern for their constitutional right to due process can prevent prosecution of the offender and, in some cases, result in prosecution of or a civil suit against the apprehending officials.
When it is at all possible, civil law enforcement agents are integrated with the military control force team making apprehensions. The team making apprehensions must carry out all procedures carefully. For each apprehension, the apprehension team must document the specific conduct that violates a law. The team must provide careful descriptive data for each offender. The description must be good enough that at a later time that person can be clearly identified as the offender in question. The team must obtain and provide the names and addresses of witnesses. They shoulq use DA f!tlJll3316-R (Detainee Turnover Record) for this purpose. The team must retain and tag each item of physical evidence like a weapon or stolen goods that supports the apprehension. And the team must give the owner a receipt for each item of evidence that is retained.
http://atiam.train.army.millportallatiaJadlsc/view/public/296872-1/fm119... 12128/2004
DOD DOA-008886
EXAMPLE OF COMPLETED OA FORM 3316·R
DETAJ!IEE ruqNOVElI RICf.oIt:

J. ~~.de .rr.st/.Dpreh~slon
1. :letaI nee
Na.e
51-41TH~ ::JOH~ O.
J"...... "P. Jo~es. Add"f!5~C.."n..1 A~
G,.,de or Title
$,(1"1­
~"P'ft Ie. •A Ill.
Description

Unit Z.I~ MP eo.
~alel~#c~o: 11, £I,..
~~,~~

4. MPIo escorted df!t.a inM to UMH
2. ""'t deu In~ did
'B; 11,/ l. i)OE
.. ,,', .. !"'''"''~
Grl:tl! or Title
a.t .w'G..-.&e....' .t!.
G~L ~~ -....-c. A•• When did inc1dent occyr (DatI! Ind Ti~)
~..-.OI... ~
Un't 9 -:r:.y C!c
I.ao '--, ao ba. ,." _

lI_rlu: ~re did incident Otc~r
~~..t :'
s...JI u.T..,.~'::;i
~$.f-,~
.,. ~s.t
~~L""7'
~,A~

Df, FO,"" 331 6-R. I MAil 511 (FRONT!
5. WJTNES~ES {'tve ftlftt. 9~.de or title I' applicable And u~tt or address} :}FT."I!jEE ~l!RNOI/ER RECORD Th1i card will bt filled out on .Ieh ".rw" dtU InN Ind ",111 lie tur~d In It t~ Dttf"tlon Cen",. ..Ith tile det.allllt•• ~n pon1bll• the ptrson Making the detentton ~~~~ld do this. If t~.$ 1t not ~ posst~le. tht person desfgnated to o escort the detlinee to tM Deten­~ tton (tllttr wnl un out t~ tll'd :; ("refe..11I't' before lecepti nq the .... deUInttl ....sed lin verbal l1'fo,.­
• 'PF=c. s-. 1... ~,2'"HIe..
b
t
6. WEAPONS AND ART1CLf.S REMOVeO:
rTV ...,.;t, I~''', Stw, G~ ;: I!Iatlnn f""" tl'1' pe,.son !lilting the _ ~et.ntIDn. ,.
Gic-$...C., I ~4ft Olff!l¥£6. ~ -
waJr ~,;.tt.....c.... t...k....-t. ... ¥-~ ~-~"7f* ,. ';.
~1-t:l&.~·
?""a(.~rt;:',..kC ,....-. II. ?tI6~/c.

0" FOR'" 3316·R, 1 MAR 68 (RACk)
Troops must not question offenders at the scene. Failure to advise an offender of his rights and improper questioning about law violations can prevent a conviction. Troops must limit their questions to asking the offender's name, place of residence, and place of employment. Ifoffenders must be questioned,
http://atiam.train.army.miliportaliatiaJadlsc/view/publicI296872-1/finI1... 12/2812004 civilian police are asked to conduct the interrogations. If civilian police are not available, CIn agents or military police may conduct interrogations essential to the civil disturbance mission.
APPREHENSIONS
It is best to use apprehension teams, especially ifit is likely that a lot ofpeople will be apprehended.· The teams provide an organized response to the situation. The teams can be organized at squad or platoon level, depending on the number of apprehensions expected.
Each team, ifpossible, consists of an apprehension officer, a movement element, and a recorder. If the control force cannot provide security for the team, a security element is added to the team. The team . apprehension officer makes the actual apprehension with the help of the other elements. The TAO may be either an officer or an NCO. If possible, a civilian police-man or a US marshal serves as TAO. The TAO .determines who is to be apprehended. He informs the offender of the reason for the apprehension. He supervises the handling of the offender. And he ensures that the apprehension process is properly conducted and documented. The TAO is responsible for the overall apprehension. This limits the number ofpeople who will be subpoenaed to court to document the apprehension. The movement element helps the TAO handle the people being apprehended. This element moves, restrains, and searches the offenders under the supervision of the TAO. The security element watches the crowd and acts as a blocking element to keep the crowd from interfering with the apprehensions. The recorder helps the TAO document the event. He helps fill out the DA Form 3316-R. Ifpossible, the recorder also photo-graphs the TAo with each apprehended person. This aids the identification process. And it provides the TAO with documentation ofthe apprehension for use in court.
If people and equipment are available, a videotape or photographic element accompanies the team. This element records the scene before, during, and after the apprehensions. The element provides pictorial documentation for use in cOurt. And having control force members taking pictures can help control crowd reaction. It reduces the impact of anonymity on the crowd's behavior, making crowd members less prone to unruly acts.
PHOTOGRAPHIC RECORD

If apprehension teams are not used, each soldier must make a quick mental estimate ofthe situation as he approaches a person he intends to apprehend. He observes the scene carefully, noting details and conditions that relate to the incident. He considers what course of action to take. Each soldier considers the attitudes of the offender and the crowd in light of the manpower available. There must be sufficient manpower to cope with the situation, especially if the crowd might turn hostile. It is better to wait for help than to have too few troops to handle a situation. Trying to force an apprehension in a hostile
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fm/I9... 12g8/2oo4_
DODDOA-008888
environment can escalate violence and endanger the persons miling the apprehension.
The behavior of the offender is observed to decide if the offender is violent, cooperative, or passive.
Unless there is good reason to believe otherwise, the offender must be considered dangerous. The mood of the crowd is observed to estimate what they might do. The crowd may be just curious onlookers, or they may support the person to be apprehended. -
The soldier selects a course of action that seems best in view of what the offender or the crowd may do. He bases his decisions on the nature and seriousness of the incident and the factors he used in estimating the situation. Actions must be kept as simple as the situation allows. The element of surprise can give him an immediate advantage over the offender. But it is best not to use surprise if the offender might panic and injure someone. And it is wise to make the apprehension at a place offering the most advantages to the team and the fewest to the offender. Apprehensions in a crowded area are avoided if possible. Crowded areas provide avenues of escape. Also, the offender may have supporters in the crowd who will come to his aid.
Each soldier must give commands in a voice and manner appropriate for the purpose and the situation. He must state his commands in simple, concise language. His manner of speaking must be convincing. It must convey an expectation that his instructions will be obeyed. With frightened people, sympathy combined with an attitude of firm assurance on the soldier's part avoids trouble. With uncooperatIve people, an attitude of forceful authority may be needed. The soldier's commands must be ofsuch a nature and content that the offender does what the soldier wants and only that.
The offender should be searched immediately. But circumstances may dictate post-poning the search until a safer place can be found. The longer the apprehension takes, the greater the risk of drawing a hostile crowd. The crowd may sympathize with the off~nder and try to help him or to escalate the violence. The offender'S actions may also incite the crowd to violence. The longer an offender is the focal point of an apprehension, the more easily he may stir a crowd to violence. The te-am may choose to move the offender out ofthe crowd's view. If an uncooperative offender is moved only a very short distance, a come-along hold or carry may be used. Ifthe distance is somewhat longer, flexcuffs or hand irons are applied.
After being searched, offenders are transported from the area. Vehicles like trucks, buses, or sedans that are used to transport apprehended offenders must be modified with barriers to separate the offenders from the driver. If a barrier cannot be provided, then a guard is placed in the vehicle. The passenger compartment is checked for items that could be used as weapons. When the guard must sit next to a prisoner, the guard always sits with his weapon away from the prisoner. Prisoners must be placed where they can best be controlled, but they are not fastened to the vehicle with hand irons or flexcuffs. Seat belts must be fastened.
When women are transported and no women are available as escorts, measures must be taken to avoid false charges ofmolestation. The names and addresses of witnesses must be taken before leaving the scene. The net control station must be notified of the departure time and the vehicle's mileage reading. And the arrival time and the mileage reading at the destination must be recorded. At least two male escorts must be present at all times when a female escort is not present. These procedures also apply when the male and female roles are reversed.
SEARCHES
Apprehended offenders must be searched immediately for weapons and for evidence that can be easily
http://atiam.train.army.mil/portal/atiaiadlsc/view/pubIic/296872-1/fm119... 12/28/2004
DODDOA-008889
destroyed or discarded. It is during the first contact with an apprehended person that the greatest caution is needed to prevent surprise and dangerous acts. Due caution, however, must be exercised constantly from the time a person is apprehended until proper disposition is made. Searches must be conducted by at least two people. One person searches while the other person provides back-up or security. If the offender is thought to be armed, the searcher's assistant covers the offender with a weapon, and the searcher ensures that his own weapon, if he has one, is secure.
Searches of people and property that are not usually subject to military law may be made by military forces during a civil disturbance. When possible, civilian police should search civilians and civilian property. If police are not available, military personnel may search people incident to an apprehension. Either the stand-up search or the wall search may be used. The choice depends on the situation. The search is made not only of the person, but also of the immediate area. This prevents the person from grabbing a weapon or from destroying evidence. Control forces may search private property, including vehicles, if--.
•
Reasonable belief exists that a person has committed or is committing a violent crime and is hiding in a building or a vehicle.

•
Reasonable belief exists that a vehicle contains weapons or instruments ofviolence.

•
Probable cause exists for searching a building or a vehicle.

•
Probable cause exists to believe that, unless immediate action is taken, evidence ofa crime will be destroyed before a warrant can be obtained.

Control force members must not search a member of the opposite sex. The TAO must wait until a member of the opposite sex is available to make the search. If there are no female control force members available to search a female offender, any qualified woman, such as a medical professional, can be called on to conduct the search. A member of either sex can search items that can be easily removed, such as luggage, packages, shoes, hat, coat, and handbags. For more information on searches, see FM
1)-10.
STAND-UP SEARCH
The stand-up search is a quick search ofthe offender for weapons and evidence. In making the search, the searcher has the offender stand with his back to the searcher. The searcher's assistant takes a position where he can watch the offender. The searcher commands the offender to spread his feet and extend his arms above his head. The searcher then searches the offender from head to feet, crushing the clothing to locate any concealed weapons. When the search is complete, flexcuffs or hand irons are put on the offender.
DODDOA-008889.001
http://atiam.train.army.mil/wrtal/atialadlsc/view/public/296872-1Ifm119-... 12.htm 12/28/2004
'1'" .
.. '. ','
r-'" ;.~
.... ".

WALL SEARCH
When a weapon is found, or when other factors indicate the need, a wall search is conducted. By . rendering an offender helpless by placing him in an awkward position, the wall search affords safety to the searcher. Wall searches are particularly useful when searching several offenders. Any upright surface can be used.
To begin the search, the soldier has the offender face the wall or ether surface and lean spread-eagled against it. The soldier makes sure the offender's feet are well apart. The offender's head must be kept down. The searcher's assistant stands on the side of the offender opposite the searcher and to the rear. When the searcher moves to the other side of the offender, the assistant also changes position. The searcher walks around the assistant when changing sides to avoid coming between the offender and the assistant guarding the offender.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-lIfm119... 12/28/2004
DODDOA-008890
Ifthe offender resists or tries to escape and must be restrained before the search is completed, the entire search is repeated from the beginning. If flexcuffs or hand irons are applied before the wall search is completed, the offender's forehead is placed against the wall to provide support in place ofthe hands. Flexcuffs or hand irons are applied when the wall search is complete.
When searching.two or more offenders, the searcher has them lean spread-eagled against the same wall; but far enough apart so they cannot reach one another. The searcher's assistant takes a position a few paces to the rear of the offenders. The searcher begins the search with the offender on the right. After searching each offender, the searcher has him move to the left end ofthe line and resume the wall-search position. This keeps the searcher from coming between the assistant and an offender.
COME-ALONG TECHNIQUES
Come-along techniques can be used to move resisting offenders. The apprehension team must be able to move the offender quickly and without the use of excess force. Flexcuffs or hand irons are placed on resisters before moving them. This reduces a resister's ability to fight ifhe or she suddenly tries to do so.
CARRY METHODS
The two-person carry is the best come-along technique ifthere are enough troops available. This carry avoids injuries caused by excessive lifting. It also avoids injuries to an offender. A soldier stands on either side ofthe offender and grasps him under the legs and through his arms and around his back. The soldiers may grasp each other's arms to prevent their hold from slipping. They also can perform this carry using riot batons. They place one baton under the legs behind the knees and the other baton horizontally across the back. Both soldiers then grasp the batons, forming a cradle.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-1/nnI19... 12/28/2004
DODDOA-008891
http://atiam.train.anny.millportallatiaiadlsc/view/public/296872-1 /finlI9-1S/CH 12.htm ~__ 12/28/2004 The offender may try to resist by stiffening and forcing himself out of the cradle. To counteract this resistance, one soldier gets behind the offender and grasps the offender under the arms. He locks his
http://atiam.train.army.mil/portal/atialadlsc/view/public/296872-1 /fmlf9-IS/CH 12.h~___12/28/2004 .
DODDOA-008893
hands in front of the offender's chest for a more secure hold. The second soldier stands to one side of·the offender and encircles the offender's legs at the knees with his ann.
~!
.... I. _--
A one-person carry has a disadvantage. It involves lifting considerable weight. This can tire the carrier quickly or cause a back injury. The soldier lifts the offender from the rear by grasping him under the arms. The soldier locks his hands in front of the offender's chest. The soldier then pulls the offender backward with the offender's heels dragging the ground. A riot baton also may be used for this technique. The soldier approaches the offender from behind. He lays the baton to the side of the offender, slightly behind the offender's buttocks. He then forces the offender into a sitting position, reaches under the offender's arms, and picks up the baton. He then rotates the baton to the front ofthe offender's chest. He places his free hand under the offender's arm and grasps the other end of the baton. Again, the soldier pulls the offender backward with the offender's heels dragging the ground.
http://atiam.train.army.mil/portal/atia/adlsc/view/puhlic/296872-1 /frnI19-15/CH 12.htm 12/28/2004
DODDOA-008894

\
. :~:;:..

http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fin11... 12/2812004 _____ COME-ALONG HOLDS

A come-along hold is used to move an unrestrained, unwilling person from one place to another. It controls the person's movements without injuring him. A come-along hold puts pressure on a sensitive part ofthe body and causes discomfort. The hold must be executed quickly and with as little commotion as possible. Speed is essential in applying these holds. Such holds are used only for short distances until the offender can be restrained. Each soldier must know which holds are best suited to his capabilities.
Baton as a Restraint and Come-Along
The riot baton may be used as a restraining device and as a come-along hold at the same time. The soldier has the offender cross his hands behind his back. He slips the offender's hand through the baton's leather thong. He then twists the baton until the slack in the thong is taken up. The thong can be tightened or loosened depending on the amount ofpressure needed to secure the offender. With his left hand, the soldier grasps the left shoulder or the clothing over the shoulder ofthe offender. He pulls the offender slightly backward so that the offender cannot pull away from the baton end, which is pressed against the small of the offender's back.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/fmI19... ~ 12/28/2004 . _... ~._
http://atiam.train.army.millportallatiaiadlsc/view/publid296872-lIfm119-...
Gooseneck Come-Along
To apply a gooseneck come-along the soldier approaches the offender from the rear. He steps forward with his left foot along the outside ofthe offender's right foot. He grasps the inside of the offender's right arm at the elbow with his left hand. He then grasps the offender's right hand with his right hand, placing his thumb inside the bend ofthe offender's wrist and his fingers across the back ofthe offender's right hand. With both hands, the soldier sharply pulls the offender off balance and to the rear so the offender's weight falls on the soldier's left shoulder. The soldier then bends the offender's right arm at the elbow and locks the offender's right arm against his chest. He reinforces his right hand with his left hand, placing both thumbs inside the bend ofthe wrist and his fingers across the back ofthe offender's hand. He locks both his elbows tightly to his side and steps up beside the offender. He applies pressure as he steps up beside the offender. He presses down on the back ofthe offender's hand, bending it under toward the forearm.
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-lIfrn11...
~-~--'~-..----­
DODDOA-008898

Front Hammerlock
For the front hammerlock the .soldier faces the offender. He steps forward with his right foot to the outside of the offender's right foot. He grasps the offender's right ann at the elbow with the soldier's right hand palm up. The soldier breaks the offender's balance by pulling the offender's right arm slightly away from the offender's body. As he pivots behind the offender, he strikes the offender's right wrist with his left wrist and bends the offender's ann to UIe rear. As the soldier completes the pivot behind the offender, he drives his left fist straight up until the offender's right wrist rests in the bend of the soldier's left ann. He then rotates his left hand down, grasping the offender's right elbow. He pulls the offender's right elbow tightly against his stomach. The offender may be leaning forward in this position. The soldier completes the hold by reaching with his right hand over the offender's shoulder and grasping the left side of the offender's face. The soldier applies pressure by turning the offender's head to the right, pushing down with his left hand, and pulling up with his left elbow.
http://atiam.train.army.mil/portal/atia!adlsc/view/public/296872-1/fml19... 12.htm 12/28/2004 http://atiam.train.army.miliportal/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
http://atiam.train.anny.miliportal/atiaiadlsc/view/public/296872-1/finI1...
http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-1/fm119...
DODDOA-008902
Fingers Come-Along
The fingers come-along is tiring to maintain, but it is extremely useful in moving an offender for a short distance. The soldier faces the offender. He steps forward with his right foot to the outside of the offender's left foot. As he steps, he reaches with both hands and grasps the offender's left wrist with his left hand. He grasps two or three fingers with his right hand. He then pivots counterclockwise on his right foot until he is standing beside the offender. He thrusts the offender's ann straight out in front of him at shoulder height, maintaining a tight grip on the offender's wrist with his left hand and bending the offender's fingers down with his right hand. The soldier applies pressure by keeping the offender's arm locked straight and by pulling the offender's fingers straight back toward the offender's elbow. This hold can be applied on either hand.
http://atiam.train.army.millportal/atiaiadlsc/view/publicl296872-1/fm/19... 12/28/2004 http://atiam.train.anny.millportai/atiaiadlsc/view/public/296872-1/fm/19... 12/28/2004

Groin Lift
The groin lift is used to remove a resisting offender from a wall or move him through a doorway. The soldier approaches the offender from the rear. He steps for-ward and places his left foot next to the offender's left foot. He grasps the offender's left wrist with his left hand, pulling the offender's hand sharply down between the offender's legs. The soldier then grasps the offender's left hand with his right hand and pulls the offender's arm up into the offender's groin. He reaches with his left hand and grabs the offender's shoulder or collar. He can then move the offender forward or backward by lifting the offender's arm against the offender's groin as he pushes down on the offender's shoulder with his left hand.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1lfin1l... 12/28/2004
DODDOA-008905
http://atiam.train.anny.miliportaliatiaiadlsc/view/public/296872-1/fm119...
DODDOA..008906
Baton Come-Along
For the baton come-along the soldier grasps the center of the baton with his right hand. He approaches the offender from behind. He rotates the baton to a position parallel with his right arm and pointed toward the offender. He thrusts the baton between the offender's legs. He rotates his right hand so that his palm is turned up. He then pulls back and up, placing the baton across the offender's upper thighs.
The soldier reaches up with his left hand and grasps the offender's collar near the back ofhis neck. To move the offender, the soldier keeps his right hand as straight as possible and exerts upward pressure from the shoulder. Simultaneously, he pushes forward with his left hand. This keeps the offender on his toes and off balance to his front.
http://atiam.train.army.millportal/atiahldlsc/view/public/296872-1/fm/i9... 12.htm 12/28/2004
http://atiam.train.anny.mil/portal/atia/adlsc/view/public/296872-1/finI1...
http://atiam.train.anny.millportal/atiaiadlsc/view/public/296872-1/finI1...
Hammerlock Come-Along
For the hammerlock come-along the soldier holds the baton in his right hand. He steps forward with his right foot and tween the offender's left arm and body. As the baton passes to the rear of the the baton passes to the rear of the offender's body, the soldier pushes up and to the rear. He steps forward with his left foot to the outside of the offender's left foot. He then reaches across the offender's left shoulder with his left hand and grasps the striking end of the baton. Pivoting on the ball of his left foot, he moves to the offender's left rear. At the same time, he presses down with his left hand on the striking end ofthe baton in the direction of the offender's left front. He also presses up on the grip end of the baton with his right hand. This bends the offender well forward at the waist.
http://atiam.train.army.mil/portallatiaiadlsc/view/public/296872-I/fm/19...
~~~~
DODDOA-008910

After the offender has been subdued, the soldier holds the baton finnly with his right hand and releases
http://atiam.train.anny.miliportallatiaiadlsc/view/public/296872-1Ifml19... 12.htm 12/28/2004 ___
DODDOA-008911
his left hand. He reaches across the striking end of the baton with his left hand and grasps the right side ofthe offender's face under the jaw bone and forces the offender's face to the left, straightening him up. To apply pressure, he presses down on the striking end of the baton with his left upper arm and pulls up on the grip of the baton with his right hand.

DETENTIOI\ FACILITY OPERATIONS
Civil authorities must provide adequate detention facilities for all apprehended people. Authorities must be prepared to detain large numbers of people. They may choose to expand existing detention facilities or to set up temporary facilities to accommodate the extra load. Ifpossible, large-scale arrests are delayed until sufficient detention facilities have been provided.
When federal forces are committed, the commander coordinates with civil authorities to ensure adequate detention facilities are available and to learn their locations and capacities. If there are more detainees than civil detention facilities can handle, civil authorities may ask the control forces to set up and operate temporary facilities. Army correctional facilities cannot be used to detain civilians. A temporary Army detention facility can be set up if-­
•
Federal troops have been employed under the provisions ofAR 500-50.

•
The task force commander has verified that available civilian detention facilities can no longer
accommodate the number ofprisoners who are awaiting arraignment and trial by civilian courts.

•
Prior approval has been granted by the Army Chief ofStaff.

Use of the temporary facility ends as soon as civil authorities can take custody ofthe detainees. The
http://atiam.train.army.millportal/atiaiadlsc/view/publicl296872-1/fm/19... ____ _12/28/2004 .__.. ___
DODDOA-008912
Anriy is responsible for the custody, health, comfort, and sustenance ofall people detained in its
facilities until custody is transferred to civil authorities. The temporary facilities cannot be used to
confine people arraigned or convicted in civilian courts. Women are detained in these facilities only
under the most extreme circumstances. And women must be transported to a civilian facility as soon as
possible.
The same operational procedures that apply to the management of an installation confinement facility apply to the management of temporary detention facilities, except for training, employment, and administrative discipline. The facilities are supervised and controlled by MP officers and NCOs trained and experienced in Army ~orrectional operations. Guards and support personnel under direct supervision and control ofMP officers and NCOs need not be trained or experienced in Army correctional· " operations. But they must be specifically instructed and closely supervised in the proper use offorce, their custodial procedures, and their completion of military and civilian forms and reports that they might have to use. Troops who may be tasked to operate a temporary detention facility should be familiar with the forms and reports used for civilian apprehensions.
The temporary facilities are set up on the nearest military installation or on suitable property under
federal control. Ideally, the facility is close enough to the disturbance area to minimize transportation
and escort needs. But it should be far enough away not to be endangered by riotous acts. Whenever
possible, existing structures are adapted for this use. But construction may be needed to provide the
segregation for ensuring effective control and administration.
The basic structure must include:
•
Search areas.

•
Holding areas for incoming men and women.

•
A processing area.

•
Holding areas for men and women who have committeq misdemeanors.

•
Holding areas for men and women who have committed felonies or are violent.

•
A holding area for property and evidence.

•
A holding area for administrative support and records.

•
A medical station.

•
Latrines.

Facility personnel must ensure that proper sanitation is maintained. When large numbers of people are
detained or processed through a facility, sanitatiori becomes a problem. Medical personnel must conduct regular health inspections to detect unsanitary practices and conditions. (For more information on health
inspections of detention facilities, see ARI90-J8.)
The facility must be organized for a smooth flow of traffic. Processing stations must be set up so there is a linear or circular sequence of movement. Processing areas are set up out of sight of the holding areas. Ifpossible, the areas are separated by a door to reduce noise in the processing area. To reduce distractions, each station may be partitioned. Detainees may be more cooperative ifthey are out ofthe sight of each other.
Injured people are given prompt medical treatment and transportation to medical facilities when necessary. A medical aid station for screening detainees and treating minor injuries is set up inside or next to the detention facility. The treatment area, however, must be out of sight ofthe processing and holding areas. Ifpossible, access to the medical facility bypasses the holding and processing areas. Facility personnel also may consider setting up a separate holding area for injured detainees.
http://atiam.train.army.millportallatiaJadlsc/view/public/296872-1/finIl... __ 12/2812004
DODDOA-008913
Detention facility operation plans must contain emergency procedures. As a minimum, the following
areas must be addressed:
•
Fire evacuation.

•
Detention facility disturbance control.

•
Detention facility defense and security.

Other emergency procedures may be needed, depending on the situation.
On arrival at the detention facility, the detainee is logged in and searched. The search is conducted even
if the apprehending team made a complete search in the field. Separate search areas are set up for men
and women. Weapons, contraband, flame-producing devices, suspected evidence, money, and high­
value items are confiscated. Medications also are confiscated. Detainees that have had medications
c('nfiscated are screened by medical personnel. Receipts are provided for any property or evidence that
is confiscated. Confiscated items are tagged. The items are stored in a controlled property area.
When a detainee is brought to the facility, a file is initiated. The detainee's case number is used on all
paperwork, such as logs, evidence tags, reports, and visual documentation. All paperwork, including
photographs, begun outside the detention facility is marked with the case number. Facility personnel
also may use hospital ID tags. Using indelible ink, they write the case number and attach the tag to the
detainee's wrist. Different colors may be used to identify different offender classifications, such as
misdemeanor, felony, or violent. If opposing factions are involved, procedures are established to ensure
members ofopposing factions are not processed together or detained in the same holding area.
After a detainee has been searched and class~fied, he is taken to a processing station. There, his
paperwork is processed. If offenders passively resist by going limp, they may be moved by wheelchair.
This reduces the number of escorts needed and the fatigue to facility personnel.
Equipment like height charts, scales, fingerprinting equipment, and cameras must be available for
completing the police report and for identifying the offender. Because detainees may use aliases and not
carry identification, special attention is paid to obtaining as much information as possible about the
detainee's physical characteristics. The paperwork is reviewed to ensure that information is complete,
including charges, witnesses, and reasons for the apprehension.
After the processing is complete, the detainee is placed in an appropriate holding area. The paperwork is
forwarded to the administrative section. The file is re-viewed for completeness and to determine the
disposition of the detainee. Information from the file may be placed into a computer to find repeat
offenders. The computer may be used to file criminal information only.
Custody transfers and release procedures must be coordinated with civil authorities and appropriate legal -counsel. Every effort must be made to arraign offenders quickly. The purpose of a detention facility is
not to keep people off the streets, but to aid in processing offenders through the legal system. To speed
up the release process, planners should consider issuing citations or subpoenas for minor offenses.
Control force members may have to respond to writs ofhabeus corpus. These writs are court orders
addressed to a prisoner's custodian. Such a writ directs the custodian to bring the prisoner to court to
determine the legality ofthe prisoner's apprehension and detention. The custodian must be sure to bring
all documentation concerning the case with him to court.
Military personnel must obey writs issued by federal courts. For writs issued by astate court, the
http://atiam.train.army.mil!portal!atia!adlsc/view/public/296872-1/finI1... 12.htm 12/28/2004 custodian or his legal advisor should respectfully reply that the prisoner is being held by authority ofthe United States. The SJA can answer any questions and explain the correct procedures.
http://atiam.train.anny.mil/portallatia/adlsc/view/public/296872-1/fm119... _~1,":,2/=2=8/-=2=OO~4L--_
CHAPTER 13
Training for Civil Disturbances
Civil disturbance training must enable personnef to function effectively, as individuals and as members of a control force. To be effective, the training must be intensive, realistic, and continuous.
Individual, team, and unit training are vital to develop personnel who are able to perform distasteful and dangerous duties with discipline and objectivity. A lack of training on the part of even one person can
adversely affect the unit's performance. That person may not be able to fulfill his responsibilities as a team member. For this reason, the unit must conduct makeup training. The unit also must make provisions for training replacement personnel. Garden Plot's Annex A and AR 500-50 provide guidance on civil disturbance training requirements.
Each commander structures his unit's training program based on expected contingencies, prior training, the unit's degree of experience, and the degree of proficiency that the unit has attained. The unit must be trained, equipped, and maintained in readiness for rapid deployment. The training must cover all aspects of civil disturbance operations. And the training must entail more than just mechanical proficiency in crowd control formations. Training must also address the sensitivity and high visibility ofcivil disturbance operations. It must emphasize protection of firefighters and their equipment, area inhabitants, and other people trying to control the disturbance.
Training must include operational techniques for use in urban, suburban, and campus areas, as well as procedures for neutralizing special threats. Training must also include use of and functioning with personal equipment. For example, unit members may expect to be equipped with body armor, protective masks, or face-shields. Thus they should train wearing this equipment to help them become accustomed to wearing it for long periods of time. And rehearsing alert plans, load plans, and operational plans must be done as often as necessary to reach and maintain the required degree ofproficiency. Commanders should also consider training in courtroom procedures. After the event, soldiers may be called as witnesses in civilian trials.
Civil disturbance trainers can keep abreast of current developments from reports in the news media, after-action reports, and a number of other sources. Lessons learned from such reports and soUrces are useful for enhancing training and keeping it current. The following subjects are a guide for refresher training:
•
Policies and legal considerations.

•
Standards of conduct.

•
Use of minimum force.

•
Use ofriot control agents and munitions.

•
Use of riot batons.

•
Search and seizure techniques.

•
Apprehension and detention.

•
Neutralization of special threats.

•
Media relations.

UNIT TRAINING
Unit training must be realistic. Field training exercises can be conducted in built-up areas on the installation or at mock-ups. The unit commander should try to include local government officials in
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-lIfm119... ~~1=2~/2=8=/2=0:-04-,-----__
DODDOA-008916
FTXs'. The officials can be either witnesses or participants. But care must be taken to prevent adverse psychological effects on the local populace, especially iftension is high. Exercises with local officials work best ifbased on a detailed scenario. Then participants have a chance to test command and staff relationships, communications, coordination, logistics, and jOint development of intelligence. Experience has shown joint exercises can identify and help solve problems before a civil disturbance occurs. The task force headquarters staff must periodi'cally test their organization and procedures with command post exercises. They also must establish a civil disturbance SOP. Proper training can reveal problems to be corrected before actual operations. This reduces confusion during civil disturbance operations.
STRESS
Training can make it possible to function in a highly disciplined and organized manner under stressful conditions. Stress training has two goals: to improve understanding of crowd and mob behavior and to prepare troops to control their own actions and emotions. The troops study the typical causes of civil disturbances to gain a better understanding of their role in helping to control civil disturbances. Group behavior must be discussed in enough detail to show the troops what to expect. Also, the troops must learn how psychological factors influence their own behavior.
Troops must control their emotions and carry out their orders wi~h detennination,and discipline when in formation, on patrol, or posted as guards. They must be physically and emotionally prepared for crowd members shouting at them, insulting them, calling them abusive names, throwing objects at them, screaming and rushing at them, tearing off their own clothes, or deliberately injuring or maiming themselves. They cannot allow personal feelings to interfere with executing their mission. They must ignore these actions and use evasive movements to avoid thrown objects. They must never throw the objects back. Troops must understand that the well-disciplined execution of orders is the most effective measure against rioters.
A way to familiarize soldiers with confronting a mob is to conduct an exercise using part ofthe unit as violent demonstrators and part as the control force. This exercise must be realistic, but safe. This training, however, must not be conducted unless the soldier is also trained to deal with his internal stress. Installation mental health personnel may be available to help with stress training. They can teach methods to help reduce the soldiers' stress and fatigue. They may also be able to advise the commander on other factors that increase the soldiers' stress levels.
WEAPONS AND SPECIAL EQUIPMENT
Every member of the control force must be trained to use his weapon and special equipment. Weapons and special equipment include riot batons, riot control agent dispersers and CS grenades, grenade launchers, shotguns, sniper rifles, cameras, portable videotape recorders, portable public address systems, night illumination devices, firefighting apparatus, grappling hooks, ladders, ropes, bulldozers, Army aircraft, armored personnel carriers, and roadblock and barricade materials. Training time can be used to construct some special equipment, such as wire barricades and wire coverings for vehicles.
Troops equipped with riot batons must be well trained in their use. Riot baton training covers employment, the human body's vulnerable and fatal points ofimpact, the basic positions, and defensive procedures and use of the baton in riot control formations. The procurement of riot batons depends on their availability in the Army's inventory. Ifthey are unavailable through Army supply channels, they can be procured by local purchase at the installation level.
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm/19... 12/28/2004
DODDOA-008917
Each service is responsible for providing, organizing, equipping; and training its forces to use riot control agents in civil disturbances. The training includes individual and unit training. Individual training covers-­
•
Policy on the employment of riot control agents.

•
Characteristics ofriot control agents. .

•
Individual protection, flrst aid, and decontamination.

•
Maintenance ofriot control agent munitions and equipment.

Unit training covers-­
•
Riot control agent squad organization.

•
Tactical employment of riot control agents in crowd control.

These are the minimum training needs. Other training may be added as needed.
Designated personnel also receive training in the operation, employment, and maintenance of riot control agent dispersers. They must know and be proficient with the following:
•
The nomenclature and characteristics of the respective dispersers and the riot control agents.

•
The effects of weather, terrain, and distance on the dispersal of riot control agents.

•
Methods of operating the dispersers.

•
Techniques that give the greatest assurance of placing an effective concentration on the target area
with a minimum spillover outside the target area.

•
Maintenance of dispersers.

•
Use, care, and inspection of protective clothing.

•
Decontamination of equipment.

•
Safety precautions.

Practical exercises are conducted under varying weather conditions and differing crowd control situations. Whenever possible, training should be integrated with unit disturbance control exercises. Drills are conducted periodically to test the readiness and proficiency of the operators and the equipment. For training purposes, technical talc, Tl, is used in place of CS.
Each unit must have an SOP that provides guidance to all soldiers, including drivers and helicopter pilots, who operate dispersers. The SOP must cover speciflc individual duties and actions to be performed before, during, and after operation of the disperser.
When special equipment training cannot be accomplished before a unit is committed to a civil disturbance, the unit commander must get qualifled personnel to operate the equipment. Ifthat cannot be done, the equipment should not be used.
During training with bayonets, the bayonets must be encased in their scabbards for safety. Trainers must emphasize that the only time the rifle is used with flxed bayonets is when the control force is confronted by a violent crowd, and the commander authorizes their use. Also, troops who will be armed with shotguns during civil disturbance operations must be well-trained in their use.
COMMUNICATIONS SYSTEMS
Personnel must be trained in the use of communications systems. Communications operating procedures
http://atiam.train.army .mil/portal/atia! adlsc/view/public/296872-1 /finI19-1S/CH 13.htrn 12/2812004
DODDOA-008918
must be included in special instructions. The telephone system, for instance, is usually simple. But it can be confusing because of various systems that exist in different areas. Troops must receive training on the telephone systems used in a projected disturbance area. They also must be provided a list of emergency numbers.
LEADERSHIP
Civil disturbance operations place unusual demands on the leadership skills of members of a control force. The complex nature ofa civil disturbance requires a combination ofdetermined execution ofduty and individual restraint. Soldiers and small-unit leaders must be aware of these demands and be prepared to deal with them. Training must include a careful review of military leadership. .
Because effective employment ofthe unit is a goal ofleadership, a good leader must thoroughly
uuderstand span ofcontrol. Task organizing for civil disturbance operations is more than usually
dependent on span of control. Span ofcontrol is the number of people or groups that one leader can
control effectively. A leader's span of control in civil disturbances is limited by his span of attention, the
personal attitudes of unit members, and the interaction ofhuman relationships.
A leader's span of attention--his ability to give equal attention to a number oftasks simultaneously--will
be severely tested. Unit members often must learn new tasks for civil disturbance operations. Because
these tasks are not part of the unit's usual mission, leaders must closely supervise these tasks to ensure
they are properly performed.
How a soldier works within his unit or reacts to a civil disturbance is determined by his attitude.
Emotions and preconceived views and attitudes can impair a soldier's ability to reason logically. Again,
close supervision is the key to preventing improper behavior.
A leader with two subordinates has two relationships, one with each subordinate. As the span of control becomes greater, the interaction ofrelationships becomes more complex. Emotions and stress further
compound the complexities of these relationships.
As the need for close supervision increases and relationships become more complex, the span of control a leader can effectively handle decreases. If a leader's span of control is overextended, bad decisions and improper behavior are likely to result. This, in turn, has an adverse effect on the unit's ability to perform
its civil disturbance mission.
Other factors that must be understood concerning span ofcontrol include:
•
Experience and training of the leader.

•
Experience and training of subordinates.

•
Amount ofclearly understood communication between a leader and his subordinates.

•
Degree of similarity among subordinates' jobs.

•
Time available for the organization to translate the leader's decisions into actions.

•
Distance by which the leader and his subordinates are separated.

•
Leader's personality and the personality ofeach of his subordinates.

•
Mental and physical conditions of the leader and his subordinates.

•
Complexity of the organization.

SPECIAL REACTION TEAM TRAINING
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-lIfm119... 12/28/2004
DODDOA-008919
Past civil disturbance operations show that there is a need for personnel to be trained to deal with special threats, such as arson; sniping, and sabotage. Commanders, in planning their organization and training, must consider the need for special reaction teams to counteract special threats. SRT leaders and members must get intensive, specialized training in all areas of civil disturbance operations, with emphasis on counteracting and controlling special threats. This training also includes extensive training in combat in urban terrain, marksmanship, rappelling, physical fitness, first aid, and the use of specialized equipment.
The team must know their equipment's potential. They must know how to use their equipment properly. And they must develop confidence in their equipment. In most cases TOE or TDA military equipment and weapons are more than adequate to deal with special threats if the team's training is sufficient. The
equipment available through supply channels or authorized by TOE or TDA must be used to the
maximum extent possible to equip SR Ts. However, local procurement may be needed to obtain special
equipment that-is deemecl absolutely necessary for the safety of the SRT and for successfully resolving
special threat situations. And SRT training must include the use of such equipment. An example of
special equipment is soft body armor with ceramic-fiberglass inserts that is used at static positions.
The goal of civil disturbance planners is to have one SRT available at all times. They should consider
training three or four 5-man SRTs so that one is available for standby. It may be necessary to alert or
employ more than one team and to combine or augment teams to deal with threats that are beyond the
capabilities ofone team.
SRT training should be conducted in two phases. The first phase is the development stage. The team identifies team and individual weaknesses that require additional training. This stage requires frequent training sessions to achieve the desired response capability, to familiarize the members with individual and team responsibilities, to sharpen individual skills, to improve team cohesiveness, and to establish esprit de corps. The second phase is the maintenance stage. This stage requires fewer training sessions, but it is no less important. In this stage, members learn advanc~d skills, develop new techniques, and reinforce and hone the skills learned in the first phase.
SRTs must be thoroughly trained not only in basic soldiering skills but in specialized and unique skills that enhance team flexibility. This is vital because each special threat situation is different and must be dealt with individually.
The SRT is designed to neutralize or apprehend a barricaded offender with a minimum ofdanger to hostages, team members, control force members, and others. All team members must cross-train in the specialized duties of the other team members. SRTs must be tested in many varied scenarios so team and individual strengths and weaknesses can be identified and corrected. It is important that SRT members train in a manner that builds teamwork and develops confidence in themselves and their teammates. The capabilities of an SRT influence the commander's decision on how and when to employ the team. Therefore, commanders should be briefed on their teams' status after each training session.
Stress training is invaluable in preparing SRT members for situations in which they must use their weapons. Stress courses provide team members with training in firing their weapons while they are running, firing rapidly, firing from difficult firing positions, reloading rapidly, firing with accelerated heart and respiration rates, and in other perceived circumstances that might confront team members. How well the teams are trained in these areas can make the difference between life and death for team members, hostages, and offenders.
Training the marksman requires additional emphasis and consideration and must be oriented more to the
http://atiam.train.army.mil/portal/atiaiadlsciview/publicl296872-1/finIl... 12/28/2004
DODDOA-008920
individual. But it also must integrate the marksman's actions with those ofthe team. The marksman must have self-discipline. He must be tested under many different and extreme conditions. He must always train wi th the same weapon and with the same grade ofammunition to ensure consistent round strikes. He must fully understand the capabilities ofhis weapon, how to identify targets, and how to engage targets rapidly. This training can only be accomplished by continuous practice under varying weather and visibility conditions. For a detailed discussion ofindividual and team training, see FM 21-75, FM 23:-9, FM 90-10, TC 19-16, TC 23-14, and TC90-6-1.
http://atiam.train.army.mil/portal/atiaiadlsc/view/publicl296872-I/fin/1... . 12/28/2004
DODDOA-008921
·APPENDIX
http://atiam.train.anny.mil/portal/atiaiadlsc/view/public/296872-1/fm119... 12/28/2004

c
o
c
c
o
»

b
o
00 CD N
W
PRESCRIBED LEVELS OF PREPAREDNESS FOR A CIVIL DISTURBANCE CONTROL
C'DCON 4
Unit has 12 hours from

initial notification to fully
attain CIOCON-4 status.

Unit increases monitor· ing and analvsis.
OA identifies reeon needs for task force commander.
Unil updates movement
needs,
DA· sets tentative H-. , Hour, if possible.
Unit fullV attains ODCON·4 status; ready to (tepa" In 12 houl'$,
Civil DistUrb.nce Conditions. at CIDCONt. are required levels of preparedness thai must be attained by units desigmhed for ciril disturbance operations, CIDCONs 3fO a me"nS of measuting that preparednp.ss. CIDCON 5is the nofmai!st8te of prepatect"*'5s. which fl"an be sustained indefinlt~y, CIOCON 1 is the state of pr9p3redness at which the unrtdepl~,
-
IV
N
00
N
§
CIDCON 3
Unit increases prepared· ness, including pos.ibly pre-positioning airlift and ground forces,
Unit ready to complete loading in 5 hours and to depart in 6 hours.
MISSION
CIDCON 2
Unit moves to airfield or st8rt point md boards aircraft or vehicl~c;.
Unit completes IO:Jrling;
ready to depl(ly first
aircraft or vehicle in 1
hour '

DA orders unit to CIOCON·' status 1 hour bmore H·Hour.
CIDCON 1
Unit 8ttainS state of m81llmUrn preparedness.
Firsl aircraft lifts off or firSI vehiclR croSS9S start pOint.
Unit deploys,

Glossary
ACRONYMS AND ABBREVIATIONS AR -Anny regulation CB -citizens band CID -Criminal Investigation Division CIDCON -civil disturbance condition CMT -crisis management team COMAAC -Commander, Alaskan Air Command CONUS -continental United States CP -command post CPXs -command post exercises CR -dibenz( 1,4 )oxazepine CS -chlorobenzalmalononitrile CSA -Anny Chief of Staff CTA -common table of allowance DA -Department of the Anny DOD -Department of Defense EOC -emergency operations center EOD -explosive ordnance disposal FM -field manual FORSCOM -Forces Command FTX -field training exercise GTA -graphic training aid HQ -headquarters HQDA -Headquarters, Department of the Army
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-1/finI1...
ID -identification
IVDS -Installation Vulnerability Detennining System
JCS -Joint Chiefs of Staff
MACOM -major Army command
MDW -Military District of Washington
MI -military intelligence
MOS -military occupational specialty
MP -military police
NCO -noncommissioned officer
OCONUS -outside continental United States
OPCON -operational control
OPLAN -operational plan
OPs -observation posts
P AO -public affairs officer
REDCOM -Readiness Command
ROTC -Reserve Officer Training Corps
SJA -staff judge advocate SOPs -standing operating procedures SRT -special reaction team ST ANO -surveillance, target acquisition, and night observation
TAO -team apprehension officer
TC -training circular
TDA -table~ of distribution and allowance
TM -technical manual
TMF -threat management force
http://atiam.train.arrny.millportal/atiaiadlsc/view/public/296872-1/ftnI... 12/28/2004
DODDOA-008925
TOE -table of organization and equipment
TRADOC -Training and Doctrine Command
TV -television UCMJ -Uniform Code of Military Justice us -United States
USA -United States Army
USACIDC -Unite~ States Army Criminal Investigation Command
USAF -United States Air Force
USCG -United States Coast Guard
USMC -United States Marine Corps
USN -United States Navy
VIP -very important person
http;llatiam.train.army.mil/portal!atiaiadlsdviewIpublic/296872-1 lfinI19-15/GLOSS.htm 12128/2004
References
RELATED PUBLICATIONS Related publications are sources of additional infonnation. They are not required in order to understand this publication. DOD Regulations DOD Reg 4000. 19-R Deferise Regional Interservice Support (DRIS) Regulation Army Regulations (ARs)
AR 1-4 Employment of Department ofthe Anny Resources in Support of the United States Secret
Service
AR 10-23 US Anny Criminal Investigation Command
AR 27-20 Claims
AR 30-1 Anny Food Service Program
AR 30-7 Operational Rations
AR 30-18 Anny Troop Issue Subsistence Activity Operating Procedures
AR 34-1 US Anny Participation in Internal Military Rationalization, Standardization and
Interoperability (RSI) Programs .
AR 37-111 Working Capital Funds -Anny Stock Fund; Unifonn Policies, Principles, and Procedures
Governing Anny Stock Fund Operations
AR 40-3 Medical, Dental, and Veterinary Care
AR 40-535 WofIdwide Aeromedical Evacuation
AR 500-5 Nuclear Surety
AR 55-29 Military Convoy Operations in CONUS
AR 55-36 DOD Use of Domestic Civil Transportation Under Emergency Conditions
AR 55-113 Movement of Units Within Continental United States
AR 55-162 Pennits for Oversize, Overweight, or Other Special Military Movements on Public
Highways in the United States AR 55-355 Military Traffic Management Regulation
http://atiam.train.army.millportallatiaiadlsc/view/public/296872-1/fm/19... .htm 12/28/2004
AR 75-15 Responsibilities and Procedures for Explosive Ordnance Disposal AR 95-1 General Provisions and Flight Regulations AR 108-2 Anny Training and Audiovisual Support AR 190-28 Use of Force by Personnel Engaged in Law Enforcement and Security Duties AR 190-30 Military Police Investigation AR 190-38 Detention Cell Standards AR 190-45 Records and Forms AR 190-47 The US Anny Correctional System AR 190-52 Countering Terrorism and Other Major Disruptions on Military Installations AR 195-1 Anny Criminal Investigation Program AR 195-2 Criminal Investigation Activities AR 210-10 Administration AR 220-15 Journals and Journal Files AR 220-58 Organization and Training for Nuclear, Biological, and Chemical Defense AR 230-81 Civilian Nonappropriated Funds and Related Activities AR 310-25 Dictionary of United States Anny Terms AR 310-50 Catalog of Abbreviations and Brevity Codes AR 350-7 Training and Evaluation ofForces for Civil Disturbances AR 350-28 Anny Exercises AR 360-5 Public Information AR 360-61 Community Relations AR 360-81 Command Information Program AR 380-5 Department of the Anny Information Security Program AR 380-13 Acquisition and Storage of Information Concerning Nonaffiliated Persons and Organizations AR 381-10 US Army Intelligence Activities
http://atiam.train.army.mil/portal/atialadlsc/view/public/296872-11fm/19... 12/28/2004.--­
DODDOA-008928
AR 381-20 US Army Counterintelligence (CI) Activities AR 385-63 Policies and Procedures for Firing Ammunition for Training, Target Practice and Combat AR 500-50 Civil Disturbances AR 500-51 Emergency Employment of Army and Other Resoures -Support to Civilian Law
Enforcement AR 500-60 Disaster Relief AR 500-70 Military Support of Civil Defense AR 525-10 Department of the Army Command and Control Reporting System AR 530-1 Operations Security (OPSEC) AR 530-2 Communications Security AR 530-3 (C) Electronic Security (U) AR 530-4 (C) Control of Compromising Emanations (U) AR 600-10 The Army Casualty System AR 600-20 Army Command Policy and Procedures AR 600-40 Apprehension, Restraint, and Release to Civil Authorities AR 638-40 Care and Disposition of Remains AR 672-5-1 Military Awards AR 700-49 Loan ofDLA Stock Fund Materiel
USACIDC Regulations (CIDRs)* CIDR 195-5 Criminal Information Program National Guard Regulations (NGRs) NGR 500-50 Civil Disturbance Control Operations
Department of the Army Pamphlets (DA PAMs) DA PAM 27-21 Military Administrative Law Handbook DA PAM 108-1 Index of Army Motion Pictures and Related Audiovisual Aids
http://atiam.train.army.miI/portallatia/adlsc/view/public/296872-lIfm119... 12128/2004
DODDOA-008929
FM 19-15 References Page 4 of8
DA PAM 135-3 A Guide to Reserve Components of the Anny
DA PAM 310-1 Consolidated Index of Anny Publications and Blank Fonus
DA PAM 360-524 Your Personal Affairs
DA PAM 360-525 Family Assistance Handbook for Mobilization
Field Manuals (FMs)
FM 3-4 NBC Protection
FM 3-5 NBC Decontamination
FM 3-8 Chemical Reference Handbook
FtvL3-9 Military Chemistry and Chemical Compounds
FM 3-100 NBC Operations
EM 19-1 Military Police Support for the AirLand Battle
FM 19-4 Military Police Team, Squad, Platoon Combat Operations
FM 19-10 Military Police Operations
FM 19-20 Law Enforcement Investigations
FM 19-25 Military Police Traffic Operations
FM 19-30 Physical Security
FM 19-40 Enemy Prisoners of War, Civilian Internees and Detained Persons
FM 19-60 Confinement and Correctional Treatment of Military Prisoners
FM 20-60 Battlefield Illumination
FM 21-10 Field Hygiene and Sanitation
fM 21-1 1 (TEST) First Aid for Soldiers
FM_21-_60 Visual Signals
FM 21-75 Combat Skills of the Soldier
FM 21-150 Combatives
FM 22-:-5 Drill and Ceremonies
http://atiam.train.army.mil/portal/atiaiadlsc/view/publiC/296872-1/finI1... .htm 12/28/2004
DODDOA-008930

FM 22-6 Guard Duty
FM 22-J 00 Military Leadership
FM 23-8 M14 and M14Al Rifles and Rifle Marksmanship
FM 23-9 M16Al Rifle and Rifle Marksmanship
FM 23-30 Grenades and Pyrotechnic Signals FM 23-31 40mm Grenade Launchers M203 and M79 FM23-35 Pistols and Revolvers
FM 24-1 (HTF) Combat Communications
FM 24-16 Communications-Electronics: Operations, Orders, Records and Reports
FM 24-18 Field Radio Techniques
FM 25-1 Training
FM 25-2 Unit Training Management
FM 25-3 Training in Units
FM 25-4 How to Conduct Training Exercises
FM 27-10 The Law of Land Warfare
FM 30-5 Combat Intelligence
FM 33-1 Psychological Operations: US Army Doctrine
FM 41-5 Joint Manual for Civil Affairs FM 41-10 Civil Affairs Operation
FM 54-7 Theater Army Logistics
FM 55-1 Army Transportation Services in a Theater of Operations
FM 55-9 Unit Air Movement Plan
FM 55-10 Anny Movement Management Units and Procedures
FM 55-12 Movement of Army Units in Air Force Aircraft
FM 55-20 Army Rail Transport Operations and Units
http://atiam.train.army.millportal/atiaiadlsc/view/publicI296872-l/fmlI9...
FM"55-30 Anny Motor Transport Units and Operations
FM 90-2(HTF) Tactical Deception
FM 90-1 O(HTF) Military Operations on Urbanized Terrain (MOUT)
FM 100-5 Operations
FM 100-10 Combat Service Support
FM 100-20 Low Intensity Conflict
FM_l 0 1-5 Staff Organization and Operations
FM lQL-:i-J Operational Terms and Symbols
FM 10I-I 0-1 Staff Officers' Field Manual: Organizational, Technical, and Logistic Data
FM 101-10-2 Staff Officers' Field Manual: Organizational, Technical, and Logistical Data Extracts of
Nondivisional Tables of Organization and Equipment Technical Manuals (TMs)
TM 3-240 Field Behavior of Chemical, Biological, and Radiological Agents
TM 3-250 Storage, Shipment, Handling, and Disposal of Chemical Agents and Hazardous Chemicals
TM 3-1 040-220-12&P Operator's and Organizational Maintenance Manual: Disperser, Riot Control
Agent, Helicopter or Vehicle Mounted, M5
TM 3-1 040-220-34&P Direct Support and General Support Maintenance Manual: Disperser, Riot
Control Agent, Helicopter or Vehicle Mounted, M5
TM 3-1 040-262-13&P Operator's, Organizational, and Direct Support Maintenance Manual: Disperser,
Riot Control Agent, Portable: M33A I
TM 8-285 Treatment of Chemical Agent Casualties and Conventional Military Chemical Injuries
TM 9-10 I 0-224-1 0 Operator's Manual for Launcher, Projectile, 64-mm: Riot Control, M234
TM 43-0001-26-1 Army Equipment Data Sheets: Chemical Defense Equipment
TM 43-0001-26-2 Army Equipment Data Sheets: Chemical Weapons and Munitions Training Circulars (TCs)
TC 19-16 Countering Terrorism on US Army Installations
TC 23-14 Sniper Training and Employment
http://atiam.train.army.mil/portal/atiaiadlsc/view/public/296872-lIfm119... 12/28/2004
DODDOA-008932
TC 90-6-1 Military Mountaineering
Training Films (TFs)
TF 3-3203 Protective Mask Fitting and Drill
TF 3-3372 Masking Procedures in Combat
TF 3-4060 Components of the M17Al Field Protective Mask
TF 7-4584 The M16Al Rifle
TF 7-4586 The Pistol, Automatic, Cal .45, M1911Al
TF 7-4589 Weapons Safety -Part V -The M203 Grenade Launcher
TF 19-3950 Civil Disturbances -Principles ofControl
TF 19-3951 Civil Disturbances -Part II -Planning for Control
TF 19-4605 The Riot Baton .
TF 19-4873 Crowd Control Formations
TF 19-4882 Collective Behavior -Civil Disturbances -Part I -Evolution of Disorder and Crowd
Psychological Factors
TF 19-4884 Operational Doctrine -Civil Disturbances -Part I -Principles
TF 19-48g5 Operational Doctrine -Civil Disturbances -Part II -Tasks and Techniques
TF 19-4886 Operational Doctrine -Civil Disturbances -Part III -Application of Force
TF 19-4946 Unarmed Defense
TF 19-6080 Management of Special Threat Situations MF 20-5829 Rumor
TF 32-3589 Communications Security
TF 33-3913 Loudspeakers in Psychological Operations
TF 33-4177 Face to Face Persuasion
TF 41-3443 Military Civic Action
TF 55-3667 Preparation and Planning
http://atiam.train.army.millportallatialadlsc/view/publid296872-1/fm/.19... 12/28/2004
DODDOA-008933
TF 55-3668 Loading Techniques TF 55-3669 Lashing Techniques TF 55-4178 Convoy Planning TF 55-4276 Convoy Organization TVT 19-54 The Military Police Club TVT 19-55 The Come-Along
Graphic Training Aids (GTAs) GTA 2t~2-7 Special Orders for Civil Disturbance Operations
Department of the Defense Forms (DD Forms) DD Fonn 17311 Joint Messagefonn DD Fonn 173/2(OCR) Joint Messagefonn DD Fonn 173/3(OCR) Joint Messagefonn DD Fonn 1387-2 Special Handling Data/Certification
Department of the Army Forms (DA Forms) DA Fonn 2028 Recommended Changes to Publications and Blank Fonns DA Fonn 3316-R Detainee Turnover Record
Miscellaneous Department of the Anny Civil Disturbance Plan (Garden Plot) Manual for Courts-Martial, United States 1984
*CID Regulations are available, upon request, from Commander, USACIDC, A1TN: CIPA-AD, 5611 Columbia Pike, Falls Church, VA 22041
http://atiam.train.anny.mil/portal/ atial adlsc/view Ipublic/2968 72-1/frn119-15IREF.htrn 12128/2004
FM 19·15
25 NOVEMBER 1985
BV Order of the Secretary Of the Army:
JOHN A. WICKHAM. JR.
General United ,st.tes Army
Chi.f of Sr."
Official:
MILDRED E. HEDBERG
Bfigadi., Gene's!. United St.tes Army
The Adjullmt GeneT.'

DISTRIBUTION:
Active Army. USAR. andARNG; TD be distributed in accordance with DA form 12-11 A. Require­ments for Civil Oisturbance (Qty rQr block no. 138).
A.dditional copies may be requisitioned from the US ArmvAdjutant General Publicetions Center, 2800 Eastern Boulevard, Baltimore, Me 21220-2896.
~ L,~. (;tJVI!:t~I4~~~T PUNT!-r:: DyneI' : 1994 0 -)00-769 (222jl)
http://atiam.train.anny.millportal/atialadlsc/view/publicl296872-1/fmI19... 12/28/2004
DODDOA-008935